Inhaltszusammenfassung zur Seite Nr. 1
MULTIMEDIA PROJECTOR
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
Trademarks • DLP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments. • HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing, LLC. • T rademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other coun-tries and areas. • NVIDIA, the NVIDIA logo, and 3D VISION are registered trademarks and/or trademarks of NVIDIA
Inhaltszusammenfassung zur Seite Nr. 3
Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. Large Screen in Limited Space Digital Zoom (for Computer) Short focus lens allows you to project large images The digital zoom function allows you to focus on from short distance. (p.17) crucial information during a presentation. You can expand the images approx. 16 times the screen 3D Display Function size and compress them to approximately a quarter
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Computer System Selection 34 Features and Design . . . . . . . . . . . . . . . . . . 3 . Auto PC adjustment 35 Table of Contents . . . . . . . . . . . . . . . . . . . . . 4 . Manual PC adjustment 36 To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . 5 . Image Mode Selection 38 Safety Instructions . . . . . . . . . . . . . . . . . . . . 6 . Image Adjustment 39 Air Circulation 9 Screen Size Adjustment 40 Filter Maintenance 9 Video Input . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
To the Owner Before installing and operating this projector, read Safety Precaution this manual thoroughly. This projector provides many convenient features WARNING: and functions. THIS APPARATUS MUST BE EARTHED . Operating the projector properly enables you to TO REDUCE THE RISK OF FIRE OR manage those features and maintains it in good ELECTRIC SHOCK, DO NOT EXPOSE condition for many years to come. Improper THIS APPLIANCE TO RAIN OR MOISTURE . operation
Inhaltszusammenfassung zur Seite Nr. 6
Safety Instructions All the safety and operating instructions should be ventilation is provided. read before the product is operated. Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points Read all of the instructions given here and retain them or short out parts that could result in a fire or electric for later use. Unplug this projector from AC power shock. Never spill liquid of any kind on the projector. supply before cleaning
Inhaltszusammenfassung zur Seite Nr. 7
Safety Instructions – When an extension cord is necessary, be sure that the WARNING total current load of all equipment connected to the extension cord does not exceed the specified rating of Immediately turn the power off, unplug the projector, the extension cord. and contact your dealer under the following conditions, – Periodically unplug the power cord and remove the otherwise a fire or an electric shock may result. dust that builds up on the power cord or connector. – If smoke comes
Inhaltszusammenfassung zur Seite Nr. 8
Safety Instructions – Remove the batteries when they have been Precaution During Use exhausted or not in use for an extended period of time. – This projector is a precision machine. Do not subject – Be sure to replace both batteries at the same time. the projector to strong shocks or vibrations or knock Do not mix batteries of different types. it down. Remove the lens, close the lens mounting – Insert batteries correctly according to the “+” and “-“ hole with the front cover, and retr
Inhaltszusammenfassung zur Seite Nr. 9
Safety Instructions Air Circulation Filter Maintenance The projector uses a lamp which generates significant Openings in the cabinet are provided for ventilation. heat. The cooling fans and air vents are provided to To ensure reliable operation of the product and to dissipate the heat by drawing air into the housing and protect it from overheating, these openings must not the filter is located in the intake vents to prevent dust be blocked or covered. from getting inside of the projector
Inhaltszusammenfassung zur Seite Nr. 10
Safety Instructions Installing the Projector in Proper Position Install the projector properly. Improper installation may reduce the lamp life and cause fire hazard. Do not roll the projector more than 10 degrees from side to side. 10˚ 10˚ Do not roll the projector more than 5 degrees from side to side when front or rear is downward. 5˚ 5˚ 5˚ 5˚ Do not put the projector on either side to project an image. Note: • Fix the projector when installing it so that the projector would not fall
Inhaltszusammenfassung zur Seite Nr. 11
Compliance Federal Communications Commission Notice Multimedia Projector, Model: LV-8235 UST This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
Inhaltszusammenfassung zur Seite Nr. 12
Part Names and Functions ③ ② ① Front ①Top Controls and Indicators ②Infrared Remote Receiver CAUTION The infrared remote receiver sticks out of the cabinet surface. If the infrared remote receiver is put on the wall or floor directly, the infrared remote receiver may damage. ⑥ ③Lamp Cover (Lamp and Air Filter) ④Adjustable feet ④ ⑥ ⑤Speaker ④ ⑥Exhaust vent ⑤ CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. ⑨ ⑦ ⑧ Rear ⑦Air Intake vent ⑧Pr
Inhaltszusammenfassung zur Seite Nr. 13
Part Names and Functions Side Terminal ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑫ ⑪ ① S-VIDEO IN ⑦ CONTROL PORT Connect the S-VIDEO output signal from video When controlling the projector with RS-232C, connect the control equipment to this connector equipment to this jack (p.19). with the serial control cable. ② VIDEO IN ⑧ 3D SYNC OUT Connect the composite video output signal to this jack (p.19). Connect a 3D sync. signal cable for an IR wireless emitter to this jack (p.50) ③ AUDIO IN ⑨ LAN Connection Terminal
Inhaltszusammenfassung zur Seite Nr. 14
Part Names and Functions Top Controls and Indicators ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑪ ⑩ ① POWER indicator ⑥ POWER button – Turn red when the projector is in the stand-by Turn the projector on or off (pp.22-24). mode. – Turn green while the projector is under operation ⑦ AUTO SET button (pp.22, 76). Execute the setting of Auto setup (includes Auto – Blink green in the Power management mode input function and Auto PC function). (pp.28, 53) (pp.59, 76) ⑧ KEYSTONE button ② WARNING TEMP . indicator Correct
Inhaltszusammenfassung zur Seite Nr. 15
Part Names and Functions Remote Controller ① POWER button ⑤ S-VIDEO button Turn the projector on or off. (pp.22- Select the S-VIDEO input source. (p.43) 24) ⑥ Point buttons – Select an item or adjust the value in the On-Screen Menu. ② AUTO SET button (p.25) Execute the setting of Auto setup – Pan the image in the Digital zoom + mode. (p.41) (includes Auto input function and Auto PC function). (pp.28, 53) ⑦ SCREEN button Select a screen mode. (pp.31, 40-42, 48-49
Inhaltszusammenfassung zur Seite Nr. 16
Part Names and Functions Remote Controller Battery Installation Open the battery Install new batteries Replace the 1 2 3 compartment lid. into the compartment. compartment lid. Two AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in compartment. WARNING To ensure safe operation, please observe the following precautions : ● Use two (2) AAA type batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ●
Inhaltszusammenfassung zur Seite Nr. 17
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: A • This projector is not equipped with an optical B zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great C influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from th
Inhaltszusammenfassung zur Seite Nr. 18
Installation Connecting to a Computer Cables used for connection • VGA cables (Mini D-sub 15 pin) * • Audio cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector.) Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. External Audio Equipment Monitor Output DVI Monitor Audio Audio or Output Output Output Input Monitor Input Audio VGA VGA VGA HDMI-DVI Audio cable cable cable c
Inhaltszusammenfassung zur Seite Nr. 19
Installation Connecting to Video Equipment Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector. ) Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. External Audio Equipment Video and Audio Output Audio Input S-video Output (Video) (L) (R) Video and audio Audio cable S-video cable cable (stereo) S-VIDEO IN VIDEO IN and AUDIO IN
Inhaltszusammenfassung zur Seite Nr. 20
Installation Connecting to Component Video Equipment Monitor Output Signal Table Cables used for connection Input Terminal Monitor Out Cable • Audio cables ANALOG PC YES • Scart-VGA cable COMPUTER 1/ Y, Pb/Cb, Pr/Cr YES D-sub15 COMPONENT • Component cable SCART NO • Component-VGA cable COMPUTER 2 ANALOG PC NO D-sub15 • HDMI cable HDMI HDMI HDMI NO (Cables are not supplied with this projector.) S-VIDEO S-video NO DIN-4 VIDEO Video NO RCA Note: A cable with one end D-sub 15 and the other
