Inhaltszusammenfassung zur Seite Nr. 1
Projector
ED-X50/ED-X52
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” fi rst. After reading them, store them in a
safe place for future reference.
About this manual About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
Inhaltszusammenfassung zur Seite Nr. 2
Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage de
Inhaltszusammenfassung zur Seite Nr. 3
Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the Disconnect the power plug from the power outlet. After making sure that the smoke or odor plug from the has stopped, contact your dealer
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn. Take care of ventilation. • Keep a space of 30 cm or more between the sides and other objects such as walls. • Do not place the projector on
Inhaltszusammenfassung zur Seite Nr. 5
Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes. Please carefully read the section “Lamp”. Be careful in handling the power cord and external connection cables. If you keep using a d
Inhaltszusammenfassung zur Seite Nr. 6
Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap. • Avoid any impact or shock to the projector. • Do not drag the projector. • For moving the projector, use the enclosed case or bag if provided. Do not put anything on top of the projector. Placing anything on the
Inhaltszusammenfassung zur Seite Nr. 7
Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock. power outlet. Ask your dealer to cleaning inside of the projector about every year. Accumulations of dust inside the projector cause result in fire or malfunction.
Inhaltszusammenfassung zur Seite Nr. 8
Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need
Inhaltszusammenfassung zur Seite Nr. 9
Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the project
Inhaltszusammenfassung zur Seite Nr. 10
Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Inhaltszusammenfassung zur Seite Nr. 11
Contents Contents Contents Introduction . . . . . . . . . . . . . . . 3 PICTURE menu . . . . . . . . . . . . 28 BRIGHTNESS, CONTRAST, GAMMA, Features . . . . . . . . . . . . . . . . . . . . . . 3 COLOR TEMP, COLOR, TINT, SHARPNESS, Checking the contents of package . . . 3 MY MEMORY Part names . . . . . . . . . . . . . . . . 4 IMAGE menu . . . . . . . . . . . . . . 31 Projector . . . . . . . . . . . . . . . . . . . . . . 4 ASPECT, OVER SCAN, V POSITION, H POSITION, Control panel . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 12
Introduction Introduction Introduction Features The projector provides you with the broad use by the following features. This projector has a variety of I/O ports that supposedly cover for any business scene. This projector realizes the large projection image, even if in a small space. The new double layer fi lter system is expected to function longer and offers you less maintenance frequency. This compact, lightweight projector uses a front exhaust system that keeps the user comf
Inhaltszusammenfassung zur Seite Nr. 13
Part names Part Part names names (1) HOT! (2) (3) (4) Projector (11) (1) Lamp cover ( 56) (9) The lamp unit is inside. (2) Focus ring ( 19) (15) (3) Zoom ring ( 19) (10) (4) Control panel ( 5) (6) (5) (5) Elevator buttons (x 2) ( 19) (7) (6) Elevator feet (x 2) ( 19) (8) (6) (12) HOT! (7) Remote sensor ( 12) (8) Lens ( 60) (9) Intake vents (5) (10) Filter cover ( 58) The air fi lter and intake vent are inside. (11) Speaker ( 38) (9) (12) Exhaust vent (13) (16) (13) AC IN (AC inlet) (
Inhaltszusammenfassung zur Seite Nr. 14
Part names Control panel (1) STANDBY/ON button ( 14) (2) INPUT button ( 16, 24) (3) MENU button ( 24) It consists of four cursor buttons. (4) (4) BLANK button ( 23) (5) POWER indicator ( 11, 14, 62) (6)(7) (5) (6) TEMP indicator ( 62) (1) (2) (3) (7) LAMP indicator ( 62) Rear panel ( 9) (1) VIDEO port (6) COMPUTER IN1 port (2) S-VIDEO port (7) COMPUTER IN2 port (3) AUDIO IN1 port (8) USB TYPE B port (4) AUDIO IN2 port (9) CONTROL port (5) AUDIO OUT port (10) MONITOR OUT port (2) (3
Inhaltszusammenfassung zur Seite Nr. 15
Part names Remote control (1) VIDEO button ( 17) (2) (10) (2) COMPUTER button ( 17) (1) (4) MY SOURCE/ (3) SEARCH button ( 18) VIDEO COMPUTER DOC.CAMERA (6) (3) ASPECT AUTO SEARCH BLANK (5) (7) (4) STANDBY/ON button ( 14) PAGE VOLUME (16) MAGNIFY FREEZE (12) UP (5) ASPECT button ( 18) ON (8) (14) DOWN (6) AUTO button ( 20) OFF (9) (11) KEYSTONE MY BUTTON MUTE 12 (7) BLANK button ( 23) (19) (13) (8) MAGNIFY - ON button ( 22) (17) (15) POSITION MENU (20) (18) (9) MAGNIFY - OFF butt
Inhaltszusammenfassung zur Seite Nr. 16
Setting up Setting Setting up up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the
Inhaltszusammenfassung zur Seite Nr. 17
Setting up Arrangement (continued) WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in fi re and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand. • Do not place the projector on its side, front or rear position. • Consult with your dealer before a special inst
Inhaltszusammenfassung zur Seite Nr. 18
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. To input component video signal to COMPUTER IN1/2 port, please see the description of the COMPUTER IN item of the INPUT menu ( 34). Monitor PC RGB IN AUDIO OUT RGB OUT RS-232C AUDIO OUT RGB OUT U
Inhaltszusammenfassung zur Seite Nr. 19
Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector. - Some PCs have multiple screen display modes that may include some signals which are not supported by this projector. - Althoug
Inhaltszusammenfassung zur Seite Nr. 20
Setting up Connecting power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER AC IN ON function activated ( 45), the connection of Power cord the power supply make the projector turn on. WARNING ►Please use extra caution when connecting the power
