Inhaltszusammenfassung zur Seite Nr. 1
Table of contents
Table of Contents ...................................................................................1
Usage Notice ..........................................................................................2
Safety Information .........................................................................................2
Precautions ...................................................................................................3
Eye Safety Warnings ...............................
Inhaltszusammenfassung zur Seite Nr. 2
Usage Notice Safety Information The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the app
Inhaltszusammenfassung zur Seite Nr. 3
Usage Notice Precautions Please follow all warnings, precautions and mainte- nance as recommended in this user’s guide. Do not look into the projector’s lens when the ▀■ Warning- lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do ▀■ Warning- not expose this projector to rain or moisture. Please do not open or disassemble the projec- ▀■ Warning- tor as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow unit to cool
Inhaltszusammenfassung zur Seite Nr. 4
Usage Notice Do: ▀■ Turn off the product before cleaning. ▀■ Use a soft cloth moistened with mild detergent to clean the display housing. ▀■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: ▀■ Block the slots and openings on the unit provided for ventila- tion. ▀■ Use abrasive cleaners, waxes or solvents to clean the unit. ▀■ Use under the following conditions: - Extremely heat, cold or humidity. - In areas suscept
Inhaltszusammenfassung zur Seite Nr. 5
Usage Notice Eye Safety Warnings ▀■ Avoid staring directly into the projector beam at all times. ▀■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀■ A stick or laser pointer is recommended to avoid the need for the user to enter the beam. ▀■ Ensure that projectors are located out of the line of sight from the screen to the audience; this ensures that, when presenters look at the audience, they do not also have to stare at the pro- jector lamp. T
Inhaltszusammenfassung zur Seite Nr. 6
Introduction Product Features ® This product is a 1080p single chip 0.95” DLP projector. Out- standing features include: ® ▀■ Native 16:9 1080p DLP Technology ▀■ Complete 10-bit video processing (decoding, deinterlac- ing, scaling, image enhancement and color) ▀■ Use 7 segment color wheel R/G/B/ND/R/G/B cycle TM ▀■ PixelWorks video processor chip ▀■ Studio-grade 480i/576i Standard Definition de-interlac- ing and 1080i High Definition de-interlacing ▀■ Video Compatibility: ▪ 480i-NTSC, NTSC4.43
Inhaltszusammenfassung zur Seite Nr. 7
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap Power Cord 1.8m RS232 Cable 1.8m RCA Component Cable IR Remote Controller 2 x AA Batteries for YPbPr 2.0m Available in European version only SCART RGB/S-Video DVI to VGA Adaptor VGA Cable 1.8m N N o o t t e e Adaptor Due to the difference in applications for each country, some regions ma
Inhaltszusammenfassung zur Seite Nr. 8
Introduction Product Overview Main Unit 7 1 2 10 5 3 7 4 6 5 1 10 9 5 7 8 11 10 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Elevator Button (one on each side) 5. Elevator Feet 6. Zoom Lens 7. IR Receivers 8. Connection Ports 9. Power Socket 10. Tilt-Adjustment Feet 11. Air exhaust vent 8
Inhaltszusammenfassung zur Seite Nr. 9
Introduction Control Panel 1 2 3 4 5 6 7 8 9 1. Power and IR Receiver 2. Power Indicator LED 3. Lamp Indicator LED 4. Temp Indicator LED 5. Menu (On/Off) 6. Four Directional Select Keys 7. Source Select 8. Re-Sync 9. Enter 9 English
Inhaltszusammenfassung zur Seite Nr. 10
Introduction Connection Ports 1 2 3 4 5 6 7 8 9 10 1. +12V Relay Connector 2. Composite Video Input Connector 3. RS232 Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital and DVI-HDCP) 6. HDMI 1 Connector 7. HDMI 2 Connector 8. Component Video Input Connector 9. Power Socket TM 10. Kensington Microsaver Lock Port 10
Inhaltszusammenfassung zur Seite Nr. 11
Introduction Remote Control 1 1. Power (On/Off) 2. Contrast 2 10 3. Gamma 3 11 4. Brite Mode 4 5. Image Shift 12 6. Enter 5 7. Four Directional Select 6 Keys 8. Display Mode 7 9. Edge Mask 10. Brightness 8 6 13 11. Image AI 12. IRIS 14 9 13. Menu 14. Overscan 15. 4:3 15 19 16. 16:9 16 20 17. HDMI1 Source 18. YPbPr Source 17 21 19. Letter-Box 18 22 20. Native 21. DVI Source 22. Composite Video Source 23. HDMI2 Source 24. S-Video 23 24 11 English
Inhaltszusammenfassung zur Seite Nr. 12
Installation Connecting the Projector SCART DVD Player 7 RGB DVI +12V Relay Output 8 9 3 2 1 Video Output 4 5 6 S-Video Output 10 DVD Player, Set-top Box, HDTV receiver N N o o t t e e 1. .............................................................................................................Power Cord 2. ...................................................... DVI to VGA Adaptor (For European Only) Due to the difference 3. ....................................................................
Inhaltszusammenfassung zur Seite Nr. 13
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red. 3. Turn on the lamp by pressing “ ” button on the control panel. And the Power LED will turn blue. The startup screen will display in approximately 30 seconds. The first time you use the projector, you can select your preferred language from quick menu after the startup screen display. 4. Turn on
Inhaltszusammenfassung zur Seite Nr. 14
Installation Powering Off the Projector 1. Press the “ ” button to turn off the projector lamp, you will see a message displayed on the projector’s screen. Press the “ ” button again to confirm, otherwise the mes- sage will disappear after 5 seconds. 2. The cooling fans continue to operate for about 60 seconds for cooling cycle and the Power LED will flash blue. When the lights solid red, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until t
Inhaltszusammenfassung zur Seite Nr. 15
Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator feet into position. 3. Use screw in feet to fine-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the eleva - tor
Inhaltszusammenfassung zur Seite Nr. 16
Installation Adjusting the Projector’s Zoom / Focus Turn the Zoom Lever to zoom in or zoom out. To focus the image, turn the focus ring until you see a clear image. The projector will focus at distances from 4.9 to 39.4 feet (1.5 to 12.0 meters) and the projection screen size from 0.775m~7.62m (30.5”~300”) at 16:9 mode with mechanical travel. Zoom Lever Focus Ring Adjusting Projection Image Size Side View Front View W 1 ( 1 4 4 0 X 1 0 8 0 ) B (1 9 2 0 X 1 0 8 0 ) A L W 0 (1 9 2 0 X 1 0 8 0
Inhaltszusammenfassung zur Seite Nr. 17
User Controls Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel Refer to the “Power On/Off the Projector” Power section on pages 13-14. Press “Source” to choose DVI, RGB, Com- Source ponent-p, Component-i, S-Video, Compos- ite Video, HDTV and HDMI sources. Press “Menu” to launch the on-screen Menu display (OSD) menu. To exit OSD, Press “Menu” again. Four Direc- Use to select items or make tio
Inhaltszusammenfassung zur Seite Nr. 18
User Controls Using the Remote Control Refer to the “Power On/Off the Projector” Power section on pages 13-14. Adjust the brightness of the image. Brightness Control the degree of difference between Contrast the lightest and darkest parts of the picture. Switch the Image AI function ON/OFF. Image AI (refer to page 32-33) There are 10 preset gamma curves. After Gamma the initial setup and fine tuning is complet- ed, utilize the Gamma Adjustment steps to optimize your image output. Re
Inhaltszusammenfassung zur Seite Nr. 19
User Controls Scale the image at a 16:9 aspect ratio. 16:9 The input source will be displayed without Native scaling. Enable the viewing of the letterboxed non- Letter-Box anamorphically enhanced movie at full screen width. Part of the original image will be lost if the image aspect ratio is less than 2.35:1. Press “DVI” to choose Analog and Digital DVI Signal source from DVI connector. Press “HDMI1” to choose source from HDMI1 HDMI1 connector. Press “HDMI2” to choose source from HDMI2
Inhaltszusammenfassung zur Seite Nr. 20
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2 When OSD is d isplayed, use keys to select any item in the main menu. While making a selection on a particular page, press or “Enter” key to enter sub menu. 3. Use
