Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
TM
DLP Based Projector Commercial Use
Model No. PT-D5600E
PT-D5600EL
PT-DW5000E
PT-DW5000EL
Read these instructions completely before operating this unit.
TQBJ 0201
ITALIANO ESPAÑOL FRANÇAIS DEUTSCH ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help TM you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLP based projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-D5600E/PT-D5600EL/PT-DW5000E/PT-DW5000EL Serial n
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSl to BS1362. Check for the ASTA mark or the BSl mark on the body of the fuse. If the plug contains a removable fuse cover, you mu
Inhaltszusammenfassung zur Seite Nr. 4
Contents RASTER POSITION........................................................32 IMPORTANT SAFETY NOTICE ..................................2 XGA MODE .....................................................................32 Precautions with regard to safety ............................5 SXGA MODE...................................................................32 Accessories ................................................................7 Changing the display language .........................
Inhaltszusammenfassung zur Seite Nr. 5
Precautions with regard to safety WARNING If a problem occurs (such as no image) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. • Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. • Check that no more smoke is coming out, and then contact an Authorized Service Centre for repairs. • Do not attempt to repair the projector yourself, as this can be dangerous.
Inhaltszusammenfassung zur Seite Nr. 6
Precautions with regard to safety Do not place liquid containers on top of the projector. • If water spills onto the projector or gets inside it, fire or electric shocks could result. • If any water gets inside the projector, contact an Authorized Service Centre. Do not insert any foreign objects into the projector. • Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric shocks. After removing the batte
Inhaltszusammenfassung zur Seite Nr. 7
Use only the specified battery. • If incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Do not look into the lens while the projector is being used. • Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. Do not place your skin into the light beam while the projector is being used. • Strong light is emitted from the projector’s le
Inhaltszusammenfassung zur Seite Nr. 8
Precautions on handling Precautions on transport Disposal Make absolutely sure that the lens cap is in place To discard the product, call the dealer or a when transporting the projector or carrying it specialized dealer. around. Both the projector and the projection lens are precision-made and, as such, are susceptible to Precautions on use vibration and impacts. When transporting the To view clear images: projector and lens or carrying them around, place • The audience cannot enjoy high-contras
Inhaltszusammenfassung zur Seite Nr. 9
Name and function of parts Remote control Function 1 (FUNC1) button (page 35) < When the operation mode selector is This button can control the functions set in set to Projector > “FUNC1” of the “OPTION2” screen from Main Remote control operation indicator lamp Menu. The lamp flashes when any remote control button Digital Zoom (- D.ZOOM +) buttons (page 25) is pressed. Any portion of the picture can be zoomed in. POWER ON ( I ) button (page 22) LENS button (page 24) Turns on the power if the MA
Inhaltszusammenfassung zur Seite Nr. 10
Name and function of parts Remote control wired terminal (page 16) remote control and the main unit with the M3 PAGE UP/PAGE DOWN buttons stereo mini jack cable available in the market. These buttons correspond to the PAGE UP/PAGE Remote control transmitter window DOWN buttons on PC’s keyboard. Operate the remote control aiming at the remote ( ) buttons control receiver window on the main unit. T
Inhaltszusammenfassung zur Seite Nr. 11
Front and side of the projector Status LED lights Side-mounted (Refer to the figure connection terminals Status LED lights on the right.) (page 13) AC IN terminal (page 22) Focus ring (page 24) Connect the supplied line power cord into this For focus adjustment. receptacle. Powered focus adjustment is also available. Do not connect any other cable to this socket. Temperature monitor (TEMP) (page 40) Air filter (page 41) Lighting or blinking of this lamp indicates an abnormal condition of the
Inhaltszusammenfassung zur Seite Nr. 12
Name and function of parts Rear view of the main unit Controls on rear panel Controls on rear panel Ventilation holes DVI button (page 22) Switches to DVI-D input. Lamp unit cover SHUTTER button (page 25) The lamp unit is housed. Press this button to black out the image MAIN POWER switch (page 22) temporarily. Use this switch to turn on “I” and off “O” the main ENTER button (page 27) power applied to the projector. Press this button to enter your menu selection or to Remote control receiver win
Inhaltszusammenfassung zur Seite Nr. 13
Side-mounted connection terminals R/PR G/Y B/PB SYNC/HD VD S-VIDEO IN DVI-D IN VIDEO IN RGB 1 IN RGB 2 IN LAN REMOTE 1 REMOTE 2 IN SERIAL OUT IN OUT VIDEO IN terminal (page 21) REMOTE1 lN/OUT terminal (page 16) An input terminal for video signals. (BNC) When two or more main units are used in the system, they can be connected and controlled with S-VIDEO IN terminal (page 21) M3 stereo mini jack cable available in the market. An input terminal for S-video signals. REMOTE2 IN terminal (MIN4-pin
Inhaltszusammenfassung zur Seite Nr. 14
Using the remote control unit Loading dry cells Effective range of remote When loading batteries into the battery control operation compartment of the remote control, make sure that The remote control should normally be aimed at either their polarities are correct. the front or rear remote control receiver window on 1.Open battery compartment lid. the projector (figure 1). Otherwise, it may also be aimed at the screen, which will reflect commands Open the lid in the order of steps and . back to
Inhaltszusammenfassung zur Seite Nr. 15
Setting projector ID number to remote control Every projector has its ID number and the ID number of the controlling projector must be set to the remote control in advance so that the user can operate the remote control. The ID number of the projector is set to “ALL” on shipping, and use the ID ALL button of the remote control when using only a single projector. Procedure of ID setting Change the position of the operation mode selector switch to “Computer”. Press the ID SET button, and within f
Inhaltszusammenfassung zur Seite Nr. 16
Installation Using the remote control unit Using a wired remote control Projection schemes When multiple main units are connected in the Any of the following four projection schemes can be used system, connect the units with the M3 stereo mini depending on user’s needs or viewing conditions. jack cable available in the market to simultaneously Use “OPTION2” menu (chosen from the MAIN control the multiple main units with a single remote MENU) to choose the appropriate projection control unit thro
Inhaltszusammenfassung zur Seite Nr. 17
Projection distance by projection lens Listed in the table below are the lens projection distances for the PT-D5600E (lens included), PT-D5600EL (lens sold separately), PT-DW5000E (lens included) and PT-DW5000EL (lens sold separately). • PT-D5600E, PT-D5600EL Screen aspect ratio 4:3 Unit : m, (SD : inch) Optional lens Standard Wide-angle Wide-angle Intermediatefocus Long-focus Ultra-long-focus fixed-focus zoom lens zoom lens zoom lens zoom lens zoom lens lens Projected screen size Model No. : M
Inhaltszusammenfassung zur Seite Nr. 18
Installation • PT-DW5000E, PT-DW5000EL Screen aspect ratio 16:9 Unit : m, (SD : inch) Optional lens Standard Wide-angle Wide-angle Intermediatefocus Long-focus Ultra-long-focus fixed-focus zoom lens zoom lens zoom lens zoom lens zoom lens lens Projected screen size Model No. : Model No. : Model No. : Model No. : Model No. : Height (16:9 aspect ratio) ET-DLE050 ET-DLE100 ET-DLE200 ET-DLE310 ET-DLE410 position (1.8–2.5) (1.33 - 1.78) (2.5 - 4.0) (3.4 - 4.5) (4.5 - 8.4) Diagonal : H Height Width (
Inhaltszusammenfassung zur Seite Nr. 19
Calculation formulas for projection distance by lens types • PT-D5600E, PT-D5600EL Screen aspect ratio 4:3 (L, LW, LT : m SD : inch) Standard Minimum (LW) L=0.0370 x SD-0.0650 zoom lens Maximum (LT) L=0.0488 x SD-0.0638 Wide-angle fixed- Model No. : L=0.0166 x SD-0.0361 focus lens ET-DLE050 Wide-angle Model No. : Minimum (LW) L=0.0276 x SD-0.0452 zoom lens ET-DLE100 Maximum (LT) L=0.0372 x SD-0.0478 Intermediate-focus Model No. : Minimum (LW) L=0.0504 x SD-0.0657 zoom lens ET-DLE200 Maximum (
Inhaltszusammenfassung zur Seite Nr. 20
Connection Setup precautions • Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again. • All cable connections should be made with the entire system devices, including the projector, first turned off. • Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables. • Video signals containing too much jitter may cause the images on the screen to randomly wobble
