Inhaltszusammenfassung zur Seite Nr. 1
Quick Reference
Button for Basic Operations
REVERSE button, NEGA and BLUE indicators POWER indicator
It lights when the power is on.
For a negative image, press the button.
Each time you press the button, the display changes in the sequence:
Normal H Black & White Reversal (NEGA indicator lights) H Blue
BRIGHTNESS buttons
display (BLUE indicator lights) H Normal, and so on.
Press to adjust the brightness of
the screen.
Operation panel 2
MENU button
Press to turn the menu display on/off.
E-ZOOM b
Inhaltszusammenfassung zur Seite Nr. 2
Shooting a Document 1 Perform connections. 6 Place the material on the document stage. Connect a monitor or projector to the RGB connector on the rear of this unit. For details, refer to page 13 of the User’s Manual. Top 2 Turn on the unit. 297 mm × 420 Press the POWER switch down to the side. mm width wide 210 mm × 297 approx. mm upright Bottom POWER 7 Adjust the image size. Press the ZOOM W or T button. When you hold the button pressed, the image size changes continuously. 3 Turn on the
Inhaltszusammenfassung zur Seite Nr. 3
L Using the Freeze function 8 Adjust the focus. When changing the materials, you can eliminate Press the FOCUS 8 and 9 buttons simultaneously. The operator’s hands being seen on-screen. focus is adjusted automatically. 1 Press the FREEZE button. For fine adjustment, lightly tap the FOCUS 8 or 9 Press the button before removing the material. The button until correct focus is obtained. image will be frozen on the screen. 2 Change the material. The original image stays on the screen. 3 Press the FR
Inhaltszusammenfassung zur Seite Nr. 4
Using Menus Further detailed adjustments and settings can be made using the menus. There are two methods for menu operations; using the operation panel and using a mouse. The method using a mouse is discussed here. Iris Sharp- Lights Gain WBset Tone Reverse Color A/M ness arp- Iris Fit/ Change Save to Save to SXGA Sharp- Iris Fit/ Change Save to Save to SXGA Lights Gain WBset Tone Reverse Color Test ness A/M Over Pointer card Server /XGA Setup ness A/M Over Pointer Card Server /XGA
Inhaltszusammenfassung zur Seite Nr. 5
**BARCO ï -ï (E) 44-45 2000.7.18, 8:12 PM
Inhaltszusammenfassung zur Seite Nr. 6
Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferen
Inhaltszusammenfassung zur Seite Nr. 7
PARTS IDENTIFICATION Storage For detailed information, see the pages shown in parentheses. [ If the unit will go unused for a prolonged period, ensure safety by disconnecting the power plug. Main Unit Unplug power plug from receptacle [Store the unit in a place not subject to excessive humidity or dust. Camera head ( pp.15, 16) To shoot the document. Store only in a proper environment Camera arms ( pp.15, 16) Light arms ( pp.15, 16, 17, 19) [For storage, place the unit horizontally and do NOT pl
Inhaltszusammenfassung zur Seite Nr. 8
Continued PARTS IDENTIFICATION Main Unit Connectors REVERSE button/NEGA and BLUE indicators For a negative image or display in blue, press the button. Each time you press the button, the display changes in the sequence Normal → Black & White Reversal (NEGA indicator lights) → Blue display (BLUE indicator lights) → Normal, and so on. BRIGHTNESS button Press to adjust the brightness of the screen. ( pp.20, 27) MENU button ( p.22) Press to turn the menu display on/off. POWER indicator ( p.18) It li
Inhaltszusammenfassung zur Seite Nr. 9
Preparations Operation Others ------------------------------------------------ Safety Precautions 2 ------------------------------------------ PARTS IDENTIFICATION 5 --------------------------------------------------- INTRODUCTION 10 CONTENTS -------------------------------------------------------------- Features 10 Preparations Operation -------------------------------- --------------------------------------- LSTANDARD COMPONENTS 12 LShooting a Document 18 --------------------------------------
Inhaltszusammenfassung zur Seite Nr. 10
Easy connection to a network ( pp.14, 32) INTRODUCTION An Ethernet interface (10Base-T) is employed. This permits the Imager to be connected to an internet line as well as aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa LAN in a company. Welcome to the world of BARCO PRECA 1280 i. [ After reading this manual, keep it handy for anyone who uses the unit. [ Upon purchase, be sure to check the descriptions on the warranty card and keep it for future reference. The product number is important for safety a
Inhaltszusammenfassung zur Seite Nr. 11
Opreation Others Preparations STANDARD COMPONENTS CONNECTIONS STANDARD COMPONENTS Connecting a Projector and Monitor aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa Check that the package contains the items listed below. Before connection, be sure to turn the power to this unit and the device to be connected off. If any item is missing, immediately contact your dealer. Depending on the device to be connected, use the RGB connector, S-video connector, or vide
Inhaltszusammenfassung zur Seite Nr. 12
Opreation Others Preparations CONNECTIONS PREPARATIONS When connections are completed, perform the following preparations before shooting images. Connecting a PC/Ethernet aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa Raising the Camera Head and Light Arms Before connection, be sure to turn the power to this unit and the device to be connected off. aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa When connecting to a network, first consult the administrator of the network. For information on network setti
Inhaltszusammenfassung zur Seite Nr. 13
Opreation Others Preparations PREPARATIONS PREPARATIONS Raising the Camera Head and To Fold the Camera Attaching the Fluorescent Lamps aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa Continued Arm and Light Light Arms Attach the supplied fluorescent lamps to the lamp holders on the light arms. aaaaaaaaaa aaaaaaaaa Stands Check that the POWER switch is in the OFF position, and the power plug is disconnected from the AC outlet. aaaaaaaaa aaaaaaaaaa Remove the cap from the Insert the fluorescent lamp in
Inhaltszusammenfassung zur Seite Nr. 14
Operation Others Preparations Shooting a Document Shooting a Document Shooting a Document aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa This unit accepts both opaque (to be shot with overhead lighting) and transparent materials (such as films, to be shot with base lighting). Press the POWER switch to Place the material on the Adjust the image size by Press the LIGHTS button. turn the power on. document stage. pressing the ZOOM W or T 1 4 7 5 Each time you press the button, the illumination The POWE
Inhaltszusammenfassung zur Seite Nr. 15
Operation Others Preparations Shooting a Document Using Menus Shooting a Document Continued Using Menus aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa For efficient use of this unit, the following 14 menu icons are provided. There are two methods for displaying and operating the menu icons; using the operation panel and using a mouse. For details, see pp.22~23. Adjust the focus by pressing Adjust the brightness by Sharp- Iris Fit/ Change Save to Save to SX
Inhaltszusammenfassung zur Seite Nr. 16
Operation Others Preparations Using Menus Using Menus Continued Using Menus aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa From the operation panel Using the mouse Press the MENU button (or Move the pointer to the ZOOM W and T buttons si- upper area (upper one-fifth 2 1 1 Note Left-click the left or right multaneously). of the screen) of the screen [While the menu icons are displayed, zoom- button at the ends of the The menu icons are displayed. and click the right mouse ing operation using the ZOO
Inhaltszusammenfassung zur Seite Nr. 17
Operation Others Preparations Using Menus Using Menus Items to be Adjusted Using Menus aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa Sharp- Iris L WBset --------------------------------------------------------------- L Tone ------------------------------------------------------- Lights Gain WBset Tone Reverse Color ness A/M To adjust the white balance. To adjust the tone (gamma) setting. As the ZOOM T button (for zooming) is to be used during this adjustment, use the mouse to perform the menu
Inhaltszusammenfassung zur Seite Nr. 18
Operation Others Preparations Using Menus Using Menus Continued Items to be Adjusted Using Menus aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa L Reverse ------------------------------------------------------------- L Color ----------------------------------------------------------------- L Sharpness --------------------------------------------------------- L Iris A/M ------------------------------------------------------------ To reverse the image. To adjust the image contours, which can be adjuste
Inhaltszusammenfassung zur Seite Nr. 19
Operation Others Preparations Using Menus Using Menus Continued Items to be Adjusted Using Menus aaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaa L Fit/Over ------------------------------------------------------------ L Save to Card ----------------------------------------------------- L Setup -------------------------------------------------------------------------------------------------------------------------------------------------------- To set up startup status, networking, and other various it
Inhaltszusammenfassung zur Seite Nr. 20
Operation Others Preparations Using Menus Using Menus Continued Items to be Adjusted Using Menus aaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaa L Setup (Continued) ------------------------------------------------------------------------------------------------------------------------------------- [Timer... Setting] ---------------Set the time and date. [NetWork Setting] --------------- Set the items relating to networking. PowerOn Setting NetWork Setting Timer... Setting Return to Window PowerOn Set
