Inhaltszusammenfassung zur Seite Nr. 1
Use dual screen teletext
1 Addendum
The section “Use dual screen teletext” in this
user manual instructs you to press Dual
Enlarge teletext pages
screen to display normal teletext when dual
screen teletext is enabled.
The section “Enlarge teletext pages” in this
After updating the TV software (to version
user manual instructs you to press OPTION
64.67.3 or higher), Dual screen can no
to enlarge teletext pages.
longer be used to display normal teletext.
Use the following instructions in
Inhaltszusammenfassung zur Seite Nr. 2
Register your product and get support at www.philips.com/welcome EN USER MANUAL
Inhaltszusammenfassung zur Seite Nr. 3
5.12 Update your TV software . . . . . . . . . 29 Table of contents 6 Install channels � � � � � � � � � � � � � � � � 31 1 Important � � � � � � � � � � � � � � � � � � � � � 3 6.1 Automatically install channels . . . . . . 31 1.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6.2 Manually install channels . . . . . . . . . . 32 1.2 Screen care . . . . . . . . . . . . . . . . . . . . . 4 6.3 Rename channels . . . . . . . . . . . . . . . . 33 1.3 Environmental care
Inhaltszusammenfassung zur Seite Nr. 4
2008 © Koninklijke Philips performing source distribution, a 1. Remove fuse cover and fuse. Electronics N.V. All rights reserved. complete machine-readable copy 2. The replacement fuse must Specifications are subject to change of the corresponding source code comply with BS 1362 and have without notice. Trademarks are on a medium customarily used for the ASTA approval mark. If the the property of Koninklijke Philips software interchange. fuse is lost, contact your dealer in Electronics N.
Inhaltszusammenfassung zur Seite Nr. 5
the mains and have the TV checked by a 1 Important qualified technician. • To avoid risk of fire or electric shock, do Congratulations on your purchase and not place the TV, remote control or remote welcome to Philips! control batteries near naked flame sources Read this user manual before you start to use (e.g. lighted candles) and other heat sources this product. including direct sunlight. Pay close attention to this section and follow • Do not install the
Inhaltszusammenfassung zur Seite Nr. 6
3. Unplug the mains cord from the power of time. Examples include screen menus, connector at the back of the TV. teletext pages, black bars or stock market Always pull the mains cord by the plug. Do tickers. If you must use stationary images, not pull the mains cord. reduce the screen contrast and brightness to avoid screen damage. 13 � Environmental care Recycling your packaging The packaging of this product is intended to be recycled. Contact your local autho
Inhaltszusammenfassung zur Seite Nr. 7
Side connectors 2 Your TV This section gives you an overview of commonly-used TV controls and functions. 2�1 TV overview Side controls and indicators VOLUME 4 Use the TV side connectors to connect to mobile devices such as a camera or high- 3 definition game console. You can also connect MENU a pair of headphones or a USB memory device. PROGRAM 2 Back connectors 1 POWER 5 1. POWER 2. PROGRAM +/- 3. MENU 4. VOLUME +/- Use the TV back connectors to connect to the 5. Pow
Inhaltszusammenfassung zur Seite Nr. 8
Remote control 1. STANDBY 2. SOURCE 3. TELETEXT 1 4. COLOUR KEYS From left: Red, green, yellow, blue 2 SOURCE 5. NAVIGATION KEYS 3 Up Î, Down ï, Left Í, Right Æ, OK TELETEXT SUBTITLE 6. MENU DEMO 4 7. PROGRAM +/- GUIDE 8. VOLUME +/- INFO For advanced information about the remote control, see Section 5.1 Remote control overview. 5 BACK OK OPTION EXIT MENU 6 BROWSE 7 P 8 1 2 3 4 5 6 7 8 9 MHEG 0 CANCEL EN-6
Inhaltszusammenfassung zur Seite Nr. 9
3�2 Wall mount the TV 3 Get started B WARNING This section helps you position and install the Wall mounting of the TV should only TV and supplements the information provided be perf ormed b y qualified installers. in the Quick Start Guide. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting that D Note results in accident or injury. Refer to the Quick Start Guide for stand mounting instructions. Step 1 Purchase a VESA-compatible wall
Inhaltszusammenfassung zur Seite Nr. 10
Step 2 Remove the TV stand D Note These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Connect cables. TV stands may differ in shape on some TV models. 1. Carefully place the TV face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to Step 4 Secure the VESA-compatible wall protect your screen. bracket to the TV 1. Locate the four mounting nuts at t
Inhaltszusammenfassung zur Seite Nr. 11
3�3 Connect the antenna cable 1. Locate the TV ANTENNA connector at the back of the TV. UK - EIRE 2. Connect one end of an antenna cable (not supplied) to the TV ANTENNA 1. Locate the AC IN mains connector at the connector. Use an adaptor if the antenna back or on the bottom of the TV. cable does not fit. 2. Connect the mains cord to the AC IN 3. Connect the other end of the antenna mains connector. cable to your antenna outlet, ensuring that the cable is tightly secured at b
Inhaltszusammenfassung zur Seite Nr. 12
3. Slide the cover back into position. 37 � First time setup The first time the TV is switched on, a D Note language selection menu appears. Remove the batteries if not using the Menu language remote control for an extended period of time. Please select your English language... Español Français 3�6 Switch on the TV Hrvatski Italiano The first time you switch on the TV, check that using cursor up and Magyar the mains cord is properly connected. When down ... ready, turn
Inhaltszusammenfassung zur Seite Nr. 13
41 � �3 Switch your TV to standby 4 Use your TV This section helps you perform basic TV operations. Instructions on advanced TV opera- tions are provided in Section 5 Use more of your TV. 4�1 Switch your TV on/off or to • Press . STANDBY on the remote standby control. The power indicator switches to standby (red). 4�1�1 Switch on your TV E Tip VOLUME 4 Though your TV consumes very little power when in standby, energy continues to be 3 MENU consumed as long a
Inhaltszusammenfassung zur Seite Nr. 14
4�23 � Adjust volume 4�2 Watch TV 42 � 1 � Switch channels • Press VOLUME + or - on the remote control. • Press VOLUME + or - on the side controls of your TV. • Press a number (1 to 999) or press P +/- • Press on the remote control to mute on your remote control. the sound. Press again to un-mute the sound. • Press PROGRAM +/- on the side controls of the TV. D Note • Press on the remote control to return If headphones are connected, adjust to the previously-view
Inhaltszusammenfassung zur Seite Nr. 15
4�4 Use teletext Most TV channels broadcast information via teletext. 1. Press TELETEXT on the remote control. The main index page appears. 2. To select a page with the remote control: • Enter the page n umber with the n umber keys. • Pr ess P +/- or Î/ï to view the next or the previous page. • Pr ess a colour k e y to select one of the colour coded items at the bottom of the screen. Tip Press to return to the previously viewed page.
Inhaltszusammenfassung zur Seite Nr. 16
1. STANDBY 5 Use more of your TV Switches the TV on from standby or back to standby. This section helps you perform advanced TV 2. SOURCE operations. Selects connected devices. 3. PICTURE FORMAT 51 � Remote control overview Selects a picture format. This section provides a detailed overview of 4. SUBTITLE remote control features. Activates or deactivates subtitles. 5. COLOUR KEYS Selects tasks or teletext pages. 1 6. INFO Displays programme information, if availa
Inhaltszusammenfassung zur Seite Nr. 17
52 � 2 � Use the main menu 5�2 Use TV menus The following example describes how to use On-screen menus help you install your TV, the main menu. adjust picture and sound settings and access other features. This section describes how to navigate the menus. 52 � 1 � Access the main menu 1. Press MENU on the remote control to display the main menu. Television TV menu Channel list 1. Press MENU on the remote control to Programme guide display the main menu. Multimedia Tele
Inhaltszusammenfassung zur Seite Nr. 18
or press MENU to exit. 4. Press ï to select Picture. TV settings Picture D Note Settings assistant Contrast More choices are available when digital Reset smart settings Brightness channels are installed and broadcast. Picture Colour Sound Hue 5�2�3 Use the Quick access menu Sharpness Tint The Quick access menu gives direct access to Pixel Plus some often-needed menu items. HD Natural Motion D Note 5. Press Æ to enter the Picture settings. When digital channels are installed and
Inhaltszusammenfassung zur Seite Nr. 19
Clock and press OK to display the clock 5�32 � Adjust picture settings permanently. This section describes how to adjust picture Quick access settings. Audio language Subtitle language 1. Press MENU on the remote control Subtitle and select TV menu > TV settings > Picture format Picture. Equalizer TV settings Picture Clock Settings assistant Contrast Brightness Reset to smart settings 2. Press OPTION and press Î or ï to Colour Picture select Clock again. Hue Sound Sharpness
Inhaltszusammenfassung zur Seite Nr. 20
• Custom tint • Active Control If Custom is selected in the Tint menu, Corrects all incoming signals to provide follow the on-screen instructions to the best picture possible. Switches Active change the value of: control On or Off. - R-WP (Red White Point) • Light sensor - G-WP (Green White Point) Adjusts picture settings to match lighting - B-WP (Blue White Point) conditions in the room. Switches Light - R-BL (Red Black Level) sensor On or Off. - G-BL (Green Black Lev
