Inhaltszusammenfassung zur Seite Nr. 1
Shuttle User Guide SIR-PNP3
p.tune
s.seek
001 C hannel N am e
Artist
Song
Category 12:00P A-1
JUMP
128-7193A
1 of 32
Released: 8-6-04
Revision A: 8-10-04 Removed maximum FM frequency reference; default display mode PDT to 2 lines
and font type to A.
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations You are one step closer to experiencing the latest innovation in Sirius Satellite Radio. Sirius will revolutionize your in-home or vehicle entertainment with: • Over 120 channels of original programming, including – 65 channels of 100% commercial-free music – guaranteed, Over 50 channels of world-class sports, news, talk and information. Your Audiovox Shuttle receiver must be used with an adapter kit, such as the Audiovox Home kit, Boom Box or Vehicle Kit as required by your spe
Inhaltszusammenfassung zur Seite Nr. 3
Contents Edit Code.......................................................... 21 Cautions and Warnings ...................................... 4 Audio Level Options ......................................... 21 Shuttle System Components .............................. 4 Antenna Aiming (Home Installation)................ 21 Introduction .......................................................... 5 Memory Options ............................................... 22 Enjoying Your Sirius Shuttle .......
Inhaltszusammenfassung zur Seite Nr. 4
Cautions and Warnings Shuttle System Components 1. Do not install the Shuttle in a position that hinders your view through the windshield, or obstructs view- Shuttle Unit ing of the dashboard indicators and displays. p.tune s.seek Model PNP3, 2. Do not install the unit where it may obstruct the 001 Channel Name operation or deployment of safety devices, such P/N144-2453 Artist as airbags, etc. Song 3. Do not allow operation of the unit to detract from Category 12:00P A-1 safe driving practices;
Inhaltszusammenfassung zur Seite Nr. 5
NOTE:The SIRIUS® signal can be received and 3. The Sirius logo ( ) appears on the display processed virtually anywhere as long as there followed by the Sirius preview channel. If this is the are no obvious satellite signal obstructions first time using the Shuttle, the screen will display such as nearby buildings, high terrain, “Updating Channels”. If not, go to channel 184 us- parking garages or tunnels. ing the direct channel method, page 9, Direct Tun- The Shuttle is typically installed in
Inhaltszusammenfassung zur Seite Nr. 6
(b) Call Sirius at 1-888-539-SIRIUS (7474). One of BAND MEMORY our friendly Customer Care representatives will (p.tune) ENCODER KNOB AND (s-seek) MENU DISPLAY PUSH-TO-SELECT BUTTON BUTTON takethe necessary information and walk you BUTTON BUTTON (ENTER) BUTTON through the activation process. POWER BUTTON p.tune s.seek Sirius® Shuttle Controls CATEGORY SEARCH 001 Channel Name The Audiovox Sirius® Shuttle Unit provides eight control (UP/DOWN) LCD Artist buttons, an Encoder knob and 10 number keys.
Inhaltszusammenfassung zur Seite Nr. 7
Memory (MEMO) Button (s-seek) Function): Encoder Knob and Select Button: The Encoder knob is the primary control for navigating This feature allows the user to capture and store the cur- rent program data information (Channel Name & Num- through the various lists and option menus available on the unit. In the default mode, the Encoder knob provides ber/Artist & Song title). You can store up to 24 Artist/Song Title combinations. The Shuttle also has the capability to sequential tuning through t
Inhaltszusammenfassung zur Seite Nr. 8
and band preset number on the display. Pre- set tuning 2. Rotate the Encoder knob to select and play the continues until the user decides to terminate this func- desired channel, or use the Category Up/Down tion by pressing and holding the BAND Button for 2 sec- buttons to tune and select a desired channel based onds. on genre. Keypad Buttons 0-9: Tuning By Category These buttons are used to directly enter a desired chan- When in Category Tuning Mode, each momentary nel number. They are also us
Inhaltszusammenfassung zur Seite Nr. 9
is displayed on the LCD, pressing and holding the DISP Direct Tuning Button will display all the available channel numbers Channels can also be directly accessed by pressing the and channel names. The second press of the DISP Encoder knob and using the 0-9 number keys to nu- button will display all currently available artists. The third merically enter the desired channel. Once the desired press of the DISP button will display song titles. channel number has been entered, press the Encoder While
Inhaltszusammenfassung zur Seite Nr. 10
A-1 Channel Nam e 001 C hannel N am e A-2 Channel Nam e ArtisPtreset A-3 Channel Nam e Tune Mode Song A-4 Channel Nam e Category 12:00P A-1 A-5 Channel Nam e A -1 A rtist Name A-1 Song Title Press and 001 Channel Name A -2 A rtist Name A-2 Song Title 001 Channel Name Hold Preset Button A -3 A rtist Name A-3 Song Title Artist Artist A -4 A rtist Name A-4 Song Title Song Song Press and A -5 A rtist Name Hold Preset Category 12:00P A-1 A-5 Song Title Category 12:00P A-1 Button Display
Inhaltszusammenfassung zur Seite Nr. 11
the DISP button will display program informa- 001 Channel Name 001 Channel Name tion by Artist Name, Song Title or channel name. Artist Artist X Used / Y Em pty Stored Pressing and holding the DISP button will exit Song Song the Channel List mode and return to the previ- Category 12:00P A-1 Category 12:00P A-1 ously selected tuning/display mode. 2. By holding down the MEMO button for 3 seconds, the 001 Artist Name 001 Song Title stored memory information (one at a time) is displayed 002 Artist N
Inhaltszusammenfassung zur Seite Nr. 12
Memory Recall 4. When the S-seek function is on each time the Delete Shuttle is turned on, it automatically searches S-Seek the incoming signal to determine if a match exists between the signal and the currently saved infor- Delete S-Seek mation stored in receiver memory. If one or more matches are found, pop-up screen momentarily Yes ON appears for 2 seconds and displays the Phrase No OFF S-Seek Alert. An audible beep tone will be heard indicating that a match has been found. The display Turnin
Inhaltszusammenfassung zur Seite Nr. 13
001 Channel Name 001 Channel Name No stored match alert is provided for the currently selected channel. To ensure that no duplicate en- Replace Artist Artist S-Seek Full tries are stored in memory, the receiver will check Cancel Song Song the stored input data to ensure the information about Category 12:00P A-1 Category 12:00P A-1 to be stored is not already in memory. a. By selecting Replace, the memory list will a. If one or more matches are found, a display list appear, and you can use the
Inhaltszusammenfassung zur Seite Nr. 14
Menu Display Operations Sirius ID To enter the Menu Options page, press the MENU But- ton. The Menu Options list will appear on the LCD dis- play. Using the Encoder knob, highlight the option you wish to adjust and then press the Encoder knob. The following options are available: Sirius ID Audio Level Options Jump Settings Jump Settings Antenna Aiming Once the user presses the Encoder knob to enter the Display Settings Memory Options “Jump Settings” screen, a display appears for 2 FM Transmitter
Inhaltszusammenfassung zur Seite Nr. 15
Traffic Option selected, itcannot be deselected (i.e; return to When the Traffic option is highlighted on the NONE status); however, the city can be replaced “Choose Jump Setting” screen, the 3-letter with another city. abbreviation of the currently selected city is also A city selection may not be available at a given shown; however, if no city has been selected, time. In this case, a pop-up screen is displayed NONE appears. To select a desired city, press for 2 seconds indicating the city lis
Inhaltszusammenfassung zur Seite Nr. 16
display appears for 2 seconds, as shown previ- Options. Then follow the previous steps describ- ously, providing directions to set the JumpSet chan- ing city selection. nel, before returning to the “Choose Jump Setting” Tuning and Alert screen. While listening to any Sirius programming, a press and release of the Jump button, or a press and hold of the Jump Button activates the Jump 2 sec. function. If this is the first time the Jump button is activated, refer to Initial Activation. Other wise,
Inhaltszusammenfassung zur Seite Nr. 17
The receiver continues searching until a match is If a city ID has been set, the receiver will immediately start scanning all channels for a found or any list mode (Channel list, category list, Preset Tune Mode or Menu Option) is entered prior matching City ID. While searching for the city ID, a pop-up appears for 2 seconds, with “XXX Pending”, to a found match. When it exits any of the list modes and returns to the normal operation mode, the city where XXX is the 3-letter abbreviation of the
Inhaltszusammenfassung zur Seite Nr. 18
of the Jump button saves the current channel as tuned to after a power cycle, there will be an au- the JumpSet channel. When a channel is saved dible beep and the receiver remains tuned to the as a JumpSet, the band indicator will change to current channel. to indicate that the current channel is associ- Replace ated with the Jump button. The traffic city ID can only be replaced by changing it in the Menu Option - Jump Setting - Choose Traffic Market. The JumpSet channel can be replaced by pro
Inhaltszusammenfassung zur Seite Nr. 19
NOTE: It is recommended that you turn the FM Transmitter off if you are using the low level Dimming control offers two choices; Manual and Au- audio outputs in your particular application. tomatic. In both cases, a 10-segment horizontal bar Frequency Setting: graph is displayed with a “-” sign to the left, and a “+” Upon entering this mode, any FM transmitter sign to the right. The current setting is indicated on frequency can be chosen using the Category the bar graph by a reverse image segment
Inhaltszusammenfassung zur Seite Nr. 20
Add or Skip Once a channel has been highlighted, pressing the En- Upon entering this mode, a channel list is displayed with the coder knob displays the text “Lock” next to the channel current channel in play highlighted. Rotate the Encoder knob and prevents the channel from being accessible during to navigate the list and highlight the channel to be adjusted. any of the tuning modes. Locked channels can be ac- Once a channel has been highlighted, pressing the Select cessed only by direct channel
