Bedienungsanleitung Grizzly G0511

Bedienungsanleitung für das Gerät Grizzly G0511

Gerät: Grizzly G0511
Kategorie: Säge
Produzent: Grizzly
Größe: 4.03 MB
Datum des Hinzufügens: 9/3/2013
Seitenanzahl: 56
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Grizzly G0511 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Grizzly G0511 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Grizzly G0511 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Grizzly G0511 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Grizzly G0511 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Grizzly G0511 Handbuch - Online PDF
Advertisement
« Page 1 of 56 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Grizzly G0511 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Grizzly G0511 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

18" & 20"
SUPER HEAVY-DUTY
BANDSAWS
MODELS G0506/G0507/G0511
INSTRUCTION MANUAL
Model G0506 Model G0507/G0511
COPYRIGHT © AUGUST, 2002 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
REVISED DECEMBER, 2003 PRINTED IN TAIWAN

Inhaltszusammenfassung zur Seite Nr. 2

WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of

Inhaltszusammenfassung zur Seite Nr. 3

Table Of Contents PAGE 1. SAFETY ......................................................................................................................................2 SAFETY RULES FOR ALL TOOLS ..................................................................................2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR BANDSAWS................................................4 2. INTRODUCTION .............................................................................................................

Inhaltszusammenfassung zur Seite Nr. 4

SECTION 1: SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. I

Inhaltszusammenfassung zur Seite Nr. 5

Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD. Make 15. USE RECOMMENDED ACCESSORIES. sure your extension cord is in good condi- Consult the owner’s manual for recom- tion. Conductor size should be in accor- mended accessories. The use of improper dance with the chart below. The amperage accessories may cause risk of injury. rating should be listed on the motor or tool nameplate. An undersized cord will cause 16. REDUCE THE RISK OF UNINTENTION- a drop in line voltage resulting

Inhaltszusammenfassung zur Seite Nr. 6

Additional Safety Instructions For Bandsaws 1. DO NOT OPERATE WITH DULL OR 7. BLADE SHOULD BE RUNNING AT FULL BADLY WORN BLADES. Dull blades SPEED before beginning a cut. require more effort to use and are difficult to control. Inspect blades before each use. 8. ALWAYS FEED STOCK EVENLY AND SMOOTHLY. Do not force or twist blade 2. NEVER POSITION FINGERS OR while cutting, especially when sawing THUMBS IN LINE WITH THE CUT. small radii. Serious personal injury could occur. 9. THIS MACHINE IS NOT D

Inhaltszusammenfassung zur Seite Nr. 7

SECTION 2: INTRODUCTION If you have any service questions or parts Commentary requests, please call or write to us at the location listed below. Grizzly Industrial, Inc 1203 Lycoming Mall Circle Grizzly Industrial, Inc. is proud to offer the 18" Muncy, PA 17756 and 20" Super Heavy-Duty Bandsaws. These Phone:(570) 546-9663 bandsaws are a part of Grizzly’s growing family of Fax:(800) 438-5901 fine woodworking machinery. When used accord- E-Mail: techsupport@grizzly.com ing to the guidelines stated

Inhaltszusammenfassung zur Seite Nr. 8

SECTION 3: CIRCUIT REQUIREMENTS Model G0506/G0507 The Model G0506/G0507 Bandsaw is pre-wired for single-phase, 220V operation. Under normal use, the Model G0506 2 HP motor draws approx- imately 12 amps. We recommend a 15 amp cir- cuit. This includes a 15 amp circuit breaker, plug, receptacle and wiring rated for at least 15 amps. Under normal use, the Model G0507 3 HP motor draws approximately 22 amps. We recommend a 25 amp circuit. This includes a 25 amp circuit breaker, plug and wiring rated f

Inhaltszusammenfassung zur Seite Nr. 9

Model G0511 440V Operation The Model G0511 Bandsaw is pre-wired for 3- The Model G0511 Bandsaw is furnished with a 3 phase, 220V operation. Under normal use, the 5 HP 3-phase motor that can be wired to 440V. HP motor draws approximately 13 amps. We rec- Under normal use, this motor draws approxi- ommend using a 15 amp circuit, including a 15 mately 6.5 amps at 440V. If 440V operation is amp circuit breaker, plug, receptacle and wiring desired, we recommend using a 10 amp circuit rated for at lea

Inhaltszusammenfassung zur Seite Nr. 10

Grounding Extension Cords We do not recommend the use of extension In the event of a malfunction or breakdown, cords on 220V or 440V equipment. It is much bet- grounding provides a path of least resistance for ter to arrange the placement of your equipment electric current to reduce the risk of electric and the installed wiring to eliminate the need for shock. This tool is not supplied with an electric extension cords. Should it be necessary to use cord. A cord with a plug with a grounding pin m

Inhaltszusammenfassung zur Seite Nr. 11

SECTION 4: CONTROLS AND COMPONENTS 6. Upper Blade Guide Assembly Identification 7. Fence The 18" and 20" Super Heavy-Duty Bandsaw 8. Control Panel controls and components are frequently referred to in this section. Please take the time to identify 9. Blade Tension Handwheel the following controls. Their locations are shown in Figures 4 and 5: 10. Emergency Stop 1. Electrical Junction Box 11. Blade Tensioning Scale 2. Guide Post Handwheel 3. Blade Guard 4. Guide Post Lock Knob 5. Blade Tracking

Inhaltszusammenfassung zur Seite Nr. 12

SECTION 5: SET UP Unpacking Piece Inventory The 18" and 20" Super Heavy-Duty Bandsaws After all the parts have been removed from the are shipped from the manufacturer in a carefully carton, you should have: packed crate. If you discover the machine is dam- aged after you have signed for delivery, please • Bandsaw Unit with Blade call Customer Service immediately for advice. • Table and Fence Rail • Fence Save the containers and all packing materials for • Dust Port possible inspection by the ca

Inhaltszusammenfassung zur Seite Nr. 13

R R R R R R E E E E E R R E T T T T T R E E R R R T R E E E E E E T T E E E E E T T T E E T T M M M M M E E M E E E M M M M M A A A M A M A A A A A I A I A I I A I I A I I I I I I D I D D D D D D D D D D D D Hardware Chart Use this chart to match up hardware pieces during the assembly process! Lock Wing 5 ⁄8'' Nut Nut # 10 Countersunk Thumb 1 ⁄4'' Phillips Phillips Screw Slotted Head Head Screw Screw Screw 5 ⁄16'' 9 ⁄16'' 3 ⁄8'' Carriage Button Cap Flange Bolt Head Screw Bolt Screw 7 ⁄16'' 1 ⁄2'

Inhaltszusammenfassung zur Seite Nr. 14

Clean Up Site Considerations The unpainted surfaces are coated with a waxy 1. Floor Load: The 18" and 20" Super Heavy- oil to protect them from corrosion during ship- Duty Bandsaws represent a large weight ment. Remove this protective coating with a sol- load in a small footprint. Most commercial floors are suitable for your machine. Some vent cleaner or citrus-based degreaser such as residential floors may require additional rein- Grizzly’s G7895 Degreaser. To clean thoroughly, forcement to sup

Inhaltszusammenfassung zur Seite Nr. 15

3. Place the large hex bolt with washer through the table trunnion mount and the trunnion. The assembly should now look similar to DO NOT connect power Figure 6. to the bandsaw until instructed to do so. Failure to do this may result in serious person- al injury. Fence Table To mount the fence: 1. Loosen the lock knob and slide the fence onto the rail. The table for this bandsaw is very heavy. Get help 2. Slide the fence beyond the center of the when placing it on the table so the blade can be

Inhaltszusammenfassung zur Seite Nr. 16

Dust Port Guide Post To install the dust port: The rack and pinion guide post can be easily raised and lowered. 1. Place the dust port on the saw as shown in Figure 8. To adjust the guide post: 1. Loosen the guide post lock knob indicated by 2. Secure it with the included Phillips head the arrow in . Figure 9 screws. 2. Turn the guide post handwheel. 3. Tighten the lock knob. Because the blade guard and the entire upper blade guide assembly are attached to the guide post, these items move up or

Inhaltszusammenfassung zur Seite Nr. 17

Blade Guard Blade Guides Always adjust the upper and lower blade guides The blade guard can be adjusted along the sup- away from the blade before removing, installing port rod to help facilitate adjustments made to the or tracking a new blade. blade guide assembly. The blade guard must be adjusted to the lowest position on the sup- To adjust the blade guides: port rod before starting the machine. 1. Loosen the 4 knurled jam nuts (the upper To move the blade guard: guide assembly is shown in Fig

Inhaltszusammenfassung zur Seite Nr. 18

Blade Tracking Gullet Line Before further adjustments can be made to the Always adjust the blade guides away from the guide assembly, the guide bearings must be set blade before making blade tracking adjustments. even with the “gullet line.” This is the inside edge of the gullets for the bandsaw teeth. The wheels on the Model G0506/G0507/G0511 Super Heavy-Duty Bandsaws are crowned and To adjust blade guides to the gullet line: have rubber tires. This style requires center blade tracking for prop

Inhaltszusammenfassung zur Seite Nr. 19

Support Bearings The support bearings support the back of the blade during the sawing operation. The adjust- ments that can be made to the support bearings are lateral placement and backing placement. Make sure the guide bearings are adjusted away from the blade before making this adjustment. Figure 14 shows the upper support bearings. Figure 15 shows the lower assembly. When making adjustments to the lower bearing the assembly will move up and down as it moves from side-to-side. Figure 15. Loos

Inhaltszusammenfassung zur Seite Nr. 20

Guide Bearings Table Tilt The guide bearings ensure that the blade cannot To tilt the table: twist during operation. Perform the steps below for both upper and lower guide bearings. 1. Loosen the large hex bolt under the table and in the center of the table trunnion as To adjust the guide bearings: shown in . Figure 18 1. Carefully tighten the guide adjustment knobs 2. Tilt the table to the desired angle. Use the until the guide bearings just touch the blade angle gauge for easy reference. on


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Grizzly 50/65 Ton Ironworker G0646 Handbuch Säge 3
2 Grizzly DURASPIN DS275-18V Handbuch Säge 1
3 Grizzly G0444 Handbuch Säge 1
4 Grizzly Contractor Style G0732 Handbuch Säge 0
5 Grizzly BT-160X Handbuch Säge 1
6 Grizzly DURASPIN DS300-AC Handbuch Säge 0
7 Grizzly G0444Z Handbuch Säge 2
8 Grizzly G0460/G0461 Handbuch Säge 4
9 Grizzly Air Cut-Off G8122 Handbuch Säge 0
10 Grizzly 50/65 Ton Ironworker G0647 Handbuch Säge 0
11 Grizzly G0457 Handbuch Säge 0
12 Grizzly G0460 Handbuch Säge 0
13 Grizzly G0461 Handbuch Säge 3
14 Grizzly G0451 Handbuch Säge 3
15 Grizzly G0501 Handbuch Säge 0
16 Sony XS-L12S Handbuch Säge 8
17 Sony XS-L10S Handbuch Säge 1
18 3Com 3CRWDR200A-75 Handbuch Säge 6
19 Agilent Technologies 16193A Handbuch Säge 4
20 Aiphone AP-10M Handbuch Säge 1