Inhaltszusammenfassung zur Seite Nr. 1
PPHSS 670
2002
Inhaltszusammenfassung zur Seite Nr. 2
Page 4 - 7 Operating instructions Kompernaß Handelsgesellschaft mbH Burgstraße 21 · D-44867 Bochum (Germany)
Inhaltszusammenfassung zur Seite Nr. 3
a b c d
PARKSIDE
Inhaltszusammenfassung zur Seite Nr. 4
PPHSS 670 PENDULUM ACTION JIGSAW For sawing wood, plastic and metal Dear Customer! We are delighted that you have decided to purchase our high quality PPHSS 670 pendulum action jigsaw. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly. Please read the operating instructions below and the accompanying safety advice carefully. Use the
Inhaltszusammenfassung zur Seite Nr. 5
If you are working for long periods on wood or materials which give rise to dangerous dusts, fit the jigsaw with a suitable tested vacuum extraction device. Always use the integrated safety devices on the jigsaw. Do not drill into the jigsaw's housing as that will break the protective insulation (Use stick-on labels, plates etc.). Cracked or deformed saw blades are not to be used. INSTALLING THE SAWBLADE Push the saw blade shaft as far as the stop into the blade holder. Take the Allan k
Inhaltszusammenfassung zur Seite Nr. 6
SETTING THE SPEED The speed of oscillation (movements of the saw blade per minute) can be set to any value in the range with the speed control wheel . The speeds are shown with the numbers 1 – 6 on the control wheel. The numbers mean: 1 = the lowest speed, 6 = the highest speed. Use the following advisory settings as a guide and choose the most suitable setting on the speed control wheel for the material to be sawn. Material Speed Rubber 1-3 Aluminium 4-5 Steel 4-5 Wood 6 SETTING THE PENDULU
Inhaltszusammenfassung zur Seite Nr. 7
VACUUM CHIP EXTRACTOR Caution!: Only use the equipment with a compatible vacuum chip extractor. The vacuum chip extraction nozzle has a standard internal diameter of 35 mm. Connect a household vacuum cleaner or a wet and dry vacuum cleaner to the nozzle as follows: 1. Rotate the vacuum hose on to the extraction nozzle and test whether it is securely held in place. 2. Slide the clear-view cover downwards for optimum chip extraction. MAINTENANCE OF THE JIGSAW 1. Clean the jigsaw regularly (re
Inhaltszusammenfassung zur Seite Nr. 8
WARRANTY This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. Beave
Inhaltszusammenfassung zur Seite Nr. 9
9
Inhaltszusammenfassung zur Seite Nr. 10
STATEMENT OF CONFORMITY We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations: (98/37 EWG), (91/368 EWG), (93/44 EWG), (93/68 EWG) EC low voltage regulations: (73/23/EWG), (93/68 EWG) Electromagnetic compatibility: (89/336 EWG), (92/31 EWG), (93/68 EWG) Applicable harmonised standards: EN 50144-1:1998, EN 50144-2-10:1996, EN 55014:1993+A1:1997 EN 60555-2/1987, EN 61000-3-3:1995, EN 55014-2:199
Inhaltszusammenfassung zur Seite Nr. 11
11
Inhaltszusammenfassung zur Seite Nr. 12
© graphic design, photos, translations by ORFGEN Marketing & Communication Essen / Germany · www.orfgen-nm.de
