Inhaltszusammenfassung zur Seite Nr. 1
HD CAMCORDER
HDW-730
HDW-750
HDW-750P
OPERATION MANUAL [English]
1st Edition (Revised 1)
Inhaltszusammenfassung zur Seite Nr. 2
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier l’entretien de l’appareil qu’à un personnel qualifié. WARNUNG Um Feuergefahr und die Gefahr eines elektrischen
Inhaltszusammenfassung zur Seite Nr. 3
For the customers in USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Inhaltszusammenfassung zur Seite Nr. 4
For the customers in Europe This product with the CE marking complies with the EMC Directive (89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: • EN55103-1: Electromagnetic Interference (Emission) • EN55103-2: Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban
Inhaltszusammenfassung zur Seite Nr. 5
Für Kunden in Europa Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Direktive (89/336/EEC) der EG-Kommission. Die Erfüllung dieser Direktive bedeutet Konformität für die folgenden Europäischen Normen: • EN55103-1: Elektromagnetische Interferenz (Emission) • EN55103-2: Elektromagnetische Empfindlichkeit (Immunität) Dieses Produkt ist für den Einsatz unter folgenden elektromagnetischen Bedingungen ausgelegt: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem Maße industrielle
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents Chapter 1 Overview 1-1 Features ..................................................................................... 1-1 1-1-1 Camera Features ............................................................... 1-1 1-1-2 VTR Features .................................................................... 1-4 1-2 Precautions ................................................................................ 1-7 1-3 Example of System Configuration .........................................
Inhaltszusammenfassung zur Seite Nr. 7
3-2-6 Shooting Pictures at Intervals (Interval Rec Function) (When Using an HKDW-703) ...................................... 3-28 3-2-7 Continuous Recording on the Previous Cut .................. 3-52 3-2-8 Searching for the Last Recorded Portion and Turning in the Recording Pause Mode (End Search Function) .. 3-53 3-3 Checking the Recording — Playback ................................... 3-55 3-3-1 Checking the Last Two Seconds of the Recording — Recording Review ................................
Inhaltszusammenfassung zur Seite Nr. 8
4-6 Menu Display on the Viewfinder Screen .............................. 4-46 4-6-1 Menu Configuration ...................................................... 4-46 4-6-2 Basic Use of the Menu .................................................. 4-49 4-6-3 Editing the USER Menu ................................................ 4-55 4-7 Status Display on the Viewfinder Screen ............................. 4-64 4-7-1 Layout of the Status Display on the Viewfinder Screen ................................
Inhaltszusammenfassung zur Seite Nr. 9
4-11 Using the Scene Files ............................................................ 4-135 4-11-1 Storing Data in the Scene File ..................................... 4-135 4-11-2 Loading Scene Files .................................................... 4-145 4-11-3 Resetting the Settings of the Camcorder to the Standard Settings Saved in the Reference File ...... 4-150 4-12 Jumping to a File-Related Menu Page When Inserting a Memory Stick ......................................................
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 6 Maintenance 6-1 Testing the Camcorder Before Shooting ................................ 6-1 6-1-1 Preparations for Testing .................................................. 6-1 6-1-2 Testing the Camera ......................................................... 6-2 6-1-3 Testing the VTR .............................................................. 6-5 6-2 Maintenance ............................................................................ 6-11 6-2-1 Cleaning the Video Heads ........
Inhaltszusammenfassung zur Seite Nr. 11
Overview 1-1 Features 1) The HDW-730/750/750P HD Camcorder combines an HD color video 1 camera, of which the effective picture elements are 1920(H) × 1080(V) 2) 3) and which uses 2/3-type Power HAD sensor CCD imagers with 2,000,000 picture elements, with an HDCAM portable videocassette recorder. Its excellent image quality, sensitivity, portability, and dust- 4) and water-proof construction make it ideal as a camcorder for ENG 5) and EFP in the same way as the earlier BVW-400A/400AP. The in
Inhaltszusammenfassung zur Seite Nr. 12
• Blur-free shooting is ensured by a built-in, high-performance electronic 1 1) shutter that provides a variety of modes, such as ECS mode which 2) reduces flickering on the monitor screen, and EVS mode for the 3) 4) HDW-730 and S-EVS mode for the HDW-750/750P which improve vertical resolution. • Selectable video gain ensures a noise-free image. •A simple switch operation enables automatic adjustment of the black set, black balance, and white balance. Memory functions make it easy to replicat
Inhaltszusammenfassung zur Seite Nr. 13
•A built-in circuit produces a color bar signal for easy adjustment of the 1 color monitor. • The RM-B150 remote control unit (not supplied) controls camera functions and VTR functions. • Setup data made on the USER menu, including the various marker settings, can be stored on a Memory Stick as a user file. After storage, it can be recalled. • Setup data specified by video engineers, including the various detail settings, can be stored in the camcorder itself and on a Memory Stick as a reference
Inhaltszusammenfassung zur Seite Nr. 14
• Three down converter modes are available: SQUEEZE, LETTER BOX 1 and CROP. • The camcorder is provided with the LIGHT connector. This feeds power to the light from a battery or AC adaptor connected to the camcorder. • The viewfinder supplied with NTSC/PAL type camcorders, such as the BVW-400A/400AP, can be attached to HDW-730/750/750P in emergencies (only when an HKDW-702 (not supplied) is attached). Some functions are not available with this viewfinder. • The camcorder has the ASSIGN 1/2 switc
Inhaltszusammenfassung zur Seite Nr. 15
• It is possible to automatically rewind and review the last 2 seconds of 1 the recording on the tape for a quick check immediately after shooting. 1) • Compatible with the Tele-File Memory Label system. By pressing the RET button on the lens while recording, the timecode valid when you pressed the button is recorded on a MLB-1M-100 memory label (not supplied) attached to the cassette. This is very helpful for management of the cassette tapes and to improve the efficiency of the tape editing. •
Inhaltszusammenfassung zur Seite Nr. 16
• Four channels of analog audio can be converted to 20-bit digital 1 signals. The converted four channels of digital audio can then be recorded. • Connecting an HDCA-901 camera adaptor (not supplied) allows the input of four audio channels. This also makes it possible for the HD- SDI signal to be output. • When connecting the audio cable to AUDIO IN CH-1/CH-2 connectors (XLR 3-pin), the audio signals input to the XLR 3-pin are recorded regardless of the AUDIO IN switch setting. This function is
Inhaltszusammenfassung zur Seite Nr. 17
1-2 Precautions Use and Storage 1 Do not subject the camcorder to severe shocks The internal mechanism may be damaged or the body warped. After use Always turn off the power. Before storing the camcorder for a long period Remove the battery pack. Use and storage locations Store in a level, ventilated place. Avoid using or storing the camcorder in the following places. • Places subject to temperature extremes • Very damp places • Places subject to severe vibration • Near strong magnetic fields •
Inhaltszusammenfassung zur Seite Nr. 18
1-3 Example of System Configuration For more information about the fittings, connections, or use of additional The diagram below shows a typical configuration of the camcorder for 1 equipment and accessories, see Chapter 5 as well as the operation manuals for ENG and EFP. the connected equipment. Viewfinder-related equipment b) Lens assembly (−2.8 D to +2.0 D) (Part No. A-8262-537-A) Fog-proof filter Camera adaptor b) (Part No. 1-547-341-11) Lens assembly (−3.6 D to −0.8 D) HDCA-901 for the
Inhaltszusammenfassung zur Seite Nr. 19
Locations and Functions of Parts and Controls 2-1 Power Supply 2 Power supply 1 Battery attachment Attach a BP-L60A/M50/M100 battery pack. Furthermore, by attaching an AC-DN2B AC Adaptor, you can operate the camcorder from AC power. 2 DC IN (external power input) connector (XLR type, 4-pin, male) To operate the HDW-730/750/750P using an AC power supply, connect an AC-550/550CE AC Adaptor with the DC output cable supplied with the adaptor. To use an external battery, connect its DC output cable t
Inhaltszusammenfassung zur Seite Nr. 20
3 POWER switch This switch turns the main power supply on and off. 4 LIGHT switch 2 This switch selects the way in which a video light connected to the LIGHT connector is switched on and off. AUTO: When the video light switch is turned on, starting recording with the VTR turns on the light. MANUAL: The video light switch controls the light, turning it on and off manually. 2-2 Chapter 2 Locations and Functions of Parts and Controls
