Inhaltszusammenfassung zur Seite Nr. 1
www.blackanddecker.co.uk
CHS6000
Inhaltszusammenfassung zur Seite Nr. 2
English (Original instructions) 4 2
Inhaltszusammenfassung zur Seite Nr. 3
8 3
Inhaltszusammenfassung zur Seite Nr. 4
f. If operating a power tool in a damp location is Intended use unavoidable, use a Residual Current Device (RCD) Your Black & Decker Saw has been designed for sawing protected supply. Use of an RCD reduces the risk of wood, plastics and metal. This tool is intended for consumer electric shock. use only. 3. Personal safety Safety instructions a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not General power tool safety warnings use a power tool
Inhaltszusammenfassung zur Seite Nr. 5
d. Store idle power tools out of the reach of children cord. Cutting accessory contacting a “live” wire may and do not allow persons unfamiliar with the power make exposed metal parts of the power tool “live” and tool or these instructions to operate the power tool. could give the operator an electric shock. Power tools are dangerous in the hands of untrained Use clamps or another practical way to secure and users. support the workpiece to a stable platform. Holding e. Maintain power tools
Inhaltszusammenfassung zur Seite Nr. 6
Vibration Chargers The declared vibration emission values stated in the technical data and the declaration of conformity have been The charging base is intended for indoor use only. measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one Your charger has been designed for a specific voltage. tool with another. The declared vibration emission value may Always check that the mains voltage corresponds to the also be used in a preliminary asse
Inhaltszusammenfassung zur Seite Nr. 7
Labels on tools Charging the battery (fig. B) The battery needs to be charged before first use and Warning! To reduce the risk of injury, the user must whenever it fails to produce sufficient power on jobs that read the instruction manual. were easily done before. When charging the battery for the first time, or after prolonged storage, it will only accept an Features 80% charge. After several charge and discharge cycles, the 1. Shoe battery will attain full capacity. The battery may become
Inhaltszusammenfassung zur Seite Nr. 8
To minimise splintering, clamp a piece of scrap wood or Separate collection of used products and packaging hardboard to both sides of the workpiece and saw through allows materials to be recycled and used again. Re- this sandwich. use of recycled materials helps prevent environmental pollution and reduces the demand Sawing Metal for raw materials. Be aware that sawing metal takes much more time than Local regulations may provide for separate collection of sawing wood. electrical produc
Inhaltszusammenfassung zur Seite Nr. 9
Technical data EC declaration of conformity CHS6000 H1 MACHINERY DIRECTIVE Voltage Vdc 6 No-load speed min-1 1850 Stroke length mm 13 Max. Depth of cut CHS6000 H1 Wood mm 25 Black & Decker declares that these products described Steel mm 2 under "technical data" are in compliance with: Plastic pipe mm Ø 12 2006/42/EC, EN60745-1, EN60745-2-11 Weight kg 0.825 For more information, please contact Black & Decker at the Charger VA080025D following address or refer to the back of the manual. Input vo
Inhaltszusammenfassung zur Seite Nr. 10
check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after- sales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further informati
Inhaltszusammenfassung zur Seite Nr. 11
11 TYPE CHS600 - CHS6000 H1 CHS6000-JP01 11 10 8 1 15 7 2 9 16 6 2 8 3 4 12 2 5 2 XE only 2 14 17 2 7 13 www.2helpU.com 24 - 06 - 10 E14870
Inhaltszusammenfassung zur Seite Nr. 12
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country. Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 112
