Inhaltszusammenfassung zur Seite Nr. 1
C150-E103-01EN
M3097DG
Image Scanner
OEM Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
REVISION RECORD Edition Date published Revised contents 01 Dec. 1997 First Edition Specification No.: C150-E103- 01EN The contents of this manual is subject to change without prior notice. All Rights Reserved, Copyright © 1997 FUJITSU LIMITED
Inhaltszusammenfassung zur Seite Nr. 4
This page is intentionally left blank.
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS Chapter 1 General.......................................................................................................... 1-1 1.1 General description ................................ ................................ ................................ ..................... 1-1 1.2 Appearance and parts name ................................ ................................ ................................ ......... 1-2 Chapter 2 Specificat i ons...........................................
Inhaltszusammenfassung zur Seite Nr. 6
4.1 Packaging box and storage condition ................................ ................................ ............................ 4-1 4.2 Components in the packaging box ................................ ................................ ................................ 4-2 4.3 Installation procedure ................................ ................................ ................................ .................. 4-2 4.3.1 Removing the carrier fixing bracket ...............................
Inhaltszusammenfassung zur Seite Nr. 7
A.4 Commands ................................ ................................ ................................ ................ Appendix A-20 A.4.1 RESERVE UNIT command ................................ ................................ ................ Appendix A-22 A.4.2 RELEASE UNIT command ................................ ................................ ................. Appendix A-24 A.4.3 INQUIRY command ................................ ................................ ....................
Inhaltszusammenfassung zur Seite Nr. 8
Appendix C Throughput................................................................................Appendix C-1 C.1 Offline test ................................ ................................ ................................ .................. Appendix C-1 C.2 Online test ................................ ................................ ................................ .................. Appendix C-1 iv
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1 General 1.1 General description M3097DG image scanner is an ideal input device for Electric filling systems, Facsimiles, optical character readers (OCR) , computer aided design (CAD) systems, and automatic publishing systems. M3097DG is basically the scanner which have the duplex scanning feature with the basis of M3097G+ and with the interface compatibility to M3097G+ and M3093DG. The features of the scanner are focused on as follows. (1) Duplex reading This scanner can read duplex d
Inhaltszusammenfassung zur Seite Nr. 10
General 1.2 Appearance and parts name Appearance and parts name is shown in Fig. 1.1. Figure 1.1 Part name of M3097DG 1- 2
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 Specificat i ons 2.1 Basic specifications Basic specifications of M3097DG are shown in Table 2.1. Table 2.1 Basic Specifications of M3097DG Item M3097DG Remarks 1 Operating method Flatbed and ADF 2 Image sensor CCD 3 Light source Xe Discharge tube (green) 4 Document Minimum A6 size Maximum A3 or DL 5 Basic resolution 400 dpi 6 Output resolution 100/150/200/240/300/400/600 dpi See section 2. 3 7 Zooming of IPC option 50 to 800dpi 8 Scanning FB, A4,400 dpi 2.4 sec. speed FB, A4
Inhaltszusammenfassung zur Seite Nr. 12
Specifications 2.2 Option specifications Following options are available for this scanner. Table 2.2 Option of the scanner Name Parts Number When the option required? Remarks IPC-2D CA01952-0192 - When the image processing of Either IPC-2D or IPC-3D Section 3.3 required. can be installed at a time. IPC-3D CA02919-0511 Memory TBD - When reading 601 dpi or more One memory option can be installed per scanner. (See section 2.3) 16 Mbyte, 72 pin, EDO SIMM 60 ns, non-parity Figure 2.1 IPC-2D/3D o
Inhaltszusammenfassung zur Seite Nr. 13
2.3 Reading limitation depending on the memory installed 2.3 Reading limitation depending on the memory installed M3097DG have the limitation of reading depending on the memory installed as shown in Table 2.3 and 2.4. Table 2.3 The reading limitation of M3097DG without option Output Binary Grayscale resolution Simplex Duplex Simplex Duplex 100/150/200 dpi Supported (No additional memory) 300/400 dpi 600 dpi Not supported *2 Not supported *2 *2 Setting itself may be rejected. Table 2.4 T
Inhaltszusammenfassung zur Seite Nr. 14
Specifications 2.4 Physical specifications Table 2.5 Physical specifications No. Item M3097DE/DG 1 Dimensions Height 234 ( 9.2 in.) (mm) Width 696 (27.4 in.) Depth 497 (19.6 in.) 2 Weight (Kg) 20 ( 44.2 lb) 3 Power Voltage (V AC ) 100 to 120, 200 to 240 VAC ± 10% requirements Phase Si n gle Frequency 50/60 Hz +2% -4% 4 Power consumption (VA) 120 5 Heat capacity 78 kcal ( 312 BTU/H) 6 Surge current (A) 30 7 Momentary power failure 100 % 0.5 Hz 8 Leakage current ( mA) 0.75 or less 9 Dielec
Inhaltszusammenfassung zur Seite Nr. 15
2.6 Document specifications 2.6 Document specifications When using the flatbed, any condition of the paper can be read except paper size and ground color specification. 2.6.1 Paper size A B ↑ Feeding di
Inhaltszusammenfassung zur Seite Nr. 16
Specifications 2.6.2 Paper conditions 1) Paper type • Wood free paper • PPC paper, Specified by XEROX Corporation W hen using another paper, check that it is successfully fed by ADF before performing a scanning operation. 2) Paper weight 2 2 13.9 lbs (52g/ m ) to 27.8 lbs (104g/m ) 3) Items to avoid • The following documents may be hard to read by ADF. Before you start the large quantity reading, check that the document is read appropriately. If the ADF reading is not appropriate, read them by
Inhaltszusammenfassung zur Seite Nr. 17
2.6 Document specifications Replacement of parts: The life of the pad and the pick roller may be shorter than the case that PPC document is fed. Replacement cycle of the pad and the pick roller may be around 100,000 sheets depending on the paper quality and cleaning cycle. Note 3: Paper should be straightened to fit the condition below. 2-7
Inhaltszusammenfassung zur Seite Nr. 18
Specifications 2.6.3 ADF capacity The number of pages that can be loaded into ADF chute depends on the paper size and ream weight. This information is shown in the following Figure: 52 64 81 104 127 2 g/m Figure 2.4 ADF capacity Paper weight conversion table Country Unit Conversion Japan Kg/ream 45 55 64.6 77.5 90 109.8 135 USA lb 13.9 17 20 24 27.9 34 41.8 2 Europe g/m 52 64 75 90 104 127 157 2-8
Inhaltszusammenfassung zur Seite Nr. 19
2.6 Document specifications 2.6.4 Areas that must not be perforated (for ADF reading only) Perforations in the shaded areas may cause Jam error. If you must read data from such paper, use the flatbed Figure 2.5 Areas that must not be perforated 2-9
Inhaltszusammenfassung zur Seite Nr. 20
Specifications 2.6.5 Grounding color area The color of the shaded area shown in Figure 2. 6 should be paper grounding color (white) or drop- out color. If not, set White level following OFF (Photograph) before reading . Figure 2.6 Grounding color area 2-10
