Inhaltszusammenfassung zur Seite Nr. 1
i200 Series Scanners
User’s
Guide
A-61167
Part No. 9E3968
CAT No. 850 7543
KODAK iNnovation Series Scanners
Inhaltszusammenfassung zur Seite Nr. 2
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Scanner features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Paper transport features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Speed/capacity (throughput) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Image quality features . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
Input and output trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Attaching the input tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Attaching the output tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Tray extenders and side guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adjusting the output tray . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Appendix A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Appendix B Supplies and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Appendix C Kodak i200 Series Imprinter . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Contents of the imprinter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Installing the imprinter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Before you install and operate your Kodak i200 Series Scanner, take a few minutes to read through this guide. It contains important information about installing, using, and maintaining your scanner. • Kodak i250 Scanner is a desktop simplex color scanner with an automatic document feeder. • Kodak i260 Scanner is a desktop duplex color scanner with an automatic document feeder. • Kodak i280 Scanner is a desktop duplex color scanner with an automatic document feeder. Scanner
Inhaltszusammenfassung zur Seite Nr. 6
Paper transport • Automatic and manual feeding features • Multifeed detection by document length and/or document thickness • Automatic document feeder (ADF) with operator-assisted “infinite” and single-sheet feeding Speed/Capacity The following speeds in pages per minute (ppm) are for color, grayscale, and bi-tonal output. (throughput) Resolution Landscape (A4) Portrait (Letter) i250 Scanner i260 Scanner i280 Scanner i250 Scanner i260 Scanner i280 Scanner 150 dpi 67 ppm 67 ppm 82 ppm 53 ppm 53
Inhaltszusammenfassung zur Seite Nr. 7
Optional accessories • Kodak i200 Series Imprinter—prints a date, time, fixed string, and/or sequential number on document backs. For information about this accessory, refer to Appendix C, Kodak i200 Series Imprinter. • Kodak i200 Series Dockable Flatbed—the A3 flatbed adds scanning capability for exception documents. For information about this accessory, refer to Appendix D, Kodak i200 Series Dockable Flatbed. NOTE: For information about ordering the above accessories, refer to Appendix B,
Inhaltszusammenfassung zur Seite Nr. 8
Recommended documents The following chart lists the recommended document attributes. Materials • Virgin and recycled papers • Clear protective sleeves meeting the size and thickness requirements in this section • Photographic papers Paper Types •Bond •Inkjet • Laser • Offset Paper Weights The document feeder handles a broad range of paper weights from 50 to 200 g (13 to 110 lb.) Minimum Document Size 8.9 x 6.4 cm (3.5 x 2.5 in.) (Width x Length) Maximum Document Size i250 Scanner/i260 Scanner
Inhaltszusammenfassung zur Seite Nr. 9
Safety information • When placing the scanner, make sure that the electrical power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. CAUTION: The scanner and power supply must only be used indoors in a dry location. • Material Safety Data Sheets (MSDS) for information about chemicals used in Kodak products are available on the Kodak web site at www.kodak.com/go/MSDS. Refer to Appendix B, “Supplies,” for catalog number information. Warning labels CAUTION
Inhaltszusammenfassung zur Seite Nr. 10
Safety and regulatory The Kodak i200 Series Scanners conform to all applicable national and international product safety and electronic emission regulatory requirements. agency approvals This includes, but is not limited to, the following: Kodak i200 Series Scanners Regulatory Agency Approvals Country or Region Safety Approval Safety Mark Electromagnetic Compatibility EMC Mark Australia AS/NZS 3548 Class A C-Tick Canada CAN/CSA-C22.2 C - UL Canada ICES - 003 Issue 3 No. 60950-00 Class A 3rd Ed
Inhaltszusammenfassung zur Seite Nr. 11
Environmental •The Kodak i200 Series Scanners are designed to meet worldwide environmental requirements. information • The i200 Series Scanners’ power supply cord jacket and the solder on the circuit boards contain lead. Disposal of lead may be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities, or in the U.S.A., visit the Electronics Industry Alliance web site at www.eiae.org. • Based on a review of the available information
Inhaltszusammenfassung zur Seite Nr. 12
EMC statements United States This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radi
Inhaltszusammenfassung zur Seite Nr. 13
Installing the Scanner Site specifications Place the scanner: • in a clean area with temperature and relative humidity typical of an office environment CAUTION: The scanner and power supply must only be used indoors in a dry location. • on a stable, level work surface capable of supporting the following weights: - i250 Scanner: 12.5 kg (27.5 lb.) - i260 Scanner: 13.9 kg (30.5 lb.) - i280 Scanner: 13.9 kg (30.5 lb.) - i250 Scanner with optional flatbed accessory: 19.8 kg (43.5 lb.) - i260 Scann
Inhaltszusammenfassung zur Seite Nr. 14
System requirements Minimum system To operate the scanner, the following minimum configuration is required. configuration NOTES: The actual performance of the system depends upon the scanning application, choice of scanning parameters, and the host computer configuration. If the scanner is not performing at the optimal speed, a faster computer and/or more RAM may be necessary to obtain the rated throughput. • IBM PC (or compatible) with a Pentium III 1 GHz processor - i260 Scanner: for scann
Inhaltszusammenfassung zur Seite Nr. 15
Unpacking the scanner The scanner box contains the following items: • Kodak i200 Series Scanner • Input tray • Output tray • Power supply • Power cord(s) • Installation CD • Kodak Capture Software Lite CD • Read Me Now sheet • User’s Guide (printed English version; User’s Guide .pdf files in nine other languages are included on the Installation CD) • Registration sheet • Cleaning materials • Calibration target pack NOTE: Save all packing materials for possible future use. Registering It is very
Inhaltszusammenfassung zur Seite Nr. 16
Rear 1 Imprinter access door (for optional imprinter) 2 Imprinter access door handle 1 3 IEEE-1394 (FireWire) port 2 4 Power input 5Output tray 6 Output tray extender 3 4 5 6 Side 1 Output tray extender 2Output tray 3 Indicator lights (red, green) 4 Input tray 5 Input tray extenders 3 1 2 4 5 Internal 1 Separator module 1 2 Drive rollers 2 3 Channels for ink blotter strips (for optional imprinter) 4 Rear roller cover 3 5 Front roller cover 6 Feed module 4 5 6 12 A-61167 April 2005
Inhaltszusammenfassung zur Seite Nr. 17
Making connections Follow the instructions for installing the IEEE-1394 (FireWire) card and the Kodak Driver Software before you plug the scanner into the host computer. IMPORTANT: You must install the software on the host computer before you install the scanner. Installing the IEEE-1394 An IEEE-1394 six-pin connector is provided on the rear panel of the scanner for IEEE-1394 (FireWire) connectivity. (FireWire) card in the host computer 1. Install the IEEE-1394 (FireWire) card in the host c
Inhaltszusammenfassung zur Seite Nr. 18
2. Attach the other end of the IEEE-1394 (FireWire) cable to the host computer. WARNING: Make sure that the position of the IEEE-1394 (FireWire) cable connector end correlates to the IEEE-1394 port configuration before you plug the cable in. Damage to the scanner will occur if the cable is attached in the wrong position. IMPORTANT: The i200 Series Scanner should be the only item plugged in to the IEEE-1394 (FireWire) card on the host computer. Power setup One or more power cords may be
Inhaltszusammenfassung zur Seite Nr. 19
4. Plug the power cord into a power outlet. NOTE: Make sure that the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. 5. Press the side labeled “I” on the power switch to power up the scanner. After you power up the scanner, the red and green indicator lights will illuminate. After approximately one minute, both lights go out. When the green indicator light comes back on, the scanner is installed and ready to begin scanning. However, the host comp
Inhaltszusammenfassung zur Seite Nr. 20
Select Next. The following screen appears. Select Continue Anyway. Kodak has successfully tested the i200 Series Scanners with Windows XP. The following screen appears. Select Finish. Your scanner is now installed. 16 A-61167 April 2005
