Inhaltszusammenfassung zur Seite Nr. 1
Getting Started Basic Operation Special Features For Your Information
Camcorder
Operating Instructions
Models No. PV-L354
PV-L454
Please read these instructions carefully before attempting
to operate this product. Please save this manual.
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
LSQT0753 A
01.L454 Getting p01-09(w/o P) 1 03.11.17, 0:51 PM
Inhaltszusammenfassung zur Seite Nr. 2
Things You Should Know Thank you for choosing Panasonic! Date of Purchase You have purchased one of the most sophisticated and reliable products on the Dealer Purchased From market today. Used properly, it will bring Dealer Address you years of enjoyment. Please take time to fill in the information to the right. Dealer Phone No. The serial number is on the tag located on Model No. the underside of your Camcorder. Be sure to retain this manual as your convenient Serial No. Camcorder information s
Inhaltszusammenfassung zur Seite Nr. 3
Getting Started Things You Should Know Safety Precautions WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP) and Super Long Play (SLP) modes. You can also play a Compact VHS Camcorder recording on your VHS VCR using the optional VHS PlayPak. This Camcorder is equipped with the HQ System to provide excellent video pictures, and is compatible with standard VHS equipment. It
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards 1. Read Instructions – All the safety and 11. Grounding or Polarization – This video unit operating instructions should be read before may be equipped with either a polarized the unit is operated. 2-wire AC (Alternating Current) line plug (a plug having one blade wider than the other) 2. Retain Instructions – The safety and or 3-wire grounding type plug, a plug having a operating instructions should be retained for third (grounding) pin. future reference. The 2-wire polarize
Inhaltszusammenfassung zur Seite Nr. 5
Getting Started Important Safeguards 15. Power Lines – An outside antenna system b. If any liquid has been spilled into, or objects have fallen onto, the video unit. should not be located in the vicinity of overhead power lines or other electric light or power c. If the video unit has been exposed to rain circuits, or where it can fall into such power or water. lines or circuits. When installing an outside d. If the video unit does not operate normally antenna system, extreme care should be take
Inhaltszusammenfassung zur Seite Nr. 6
Getting Started Basic Operation Special Features For Your Information Table of Contents Things You Should Know .............................................................................2~3 Important Safeguards ...................................................................................4~5 Precautions........................................................................................................5 Select OSD Language ...............................................................
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started Select OSD Language The Camcorder is preset to ENGLISH. Before you begin... You can select ENGLISH or SPANISH as • Connect Camcorder to power source. the OSD (on screen display) language. If SPANISH language is selected, turn to the Spanish Operating Instructions in this manual. 1 Set POWER to CAMERA or VCR. 2, 3, 4 2 Press MENU for MENU mode. Press UP or DOWN to select LANGUAGE . 1 [ CAMERA MODE ] [ VCR MODE ] 3 Press M.FOCUS to select IDIOMA ; ESPAÑOL. [ CAMERA MODE ] [ VCR
Inhaltszusammenfassung zur Seite Nr. 8
Self Demo Mode Self Demo mode is on when the screen Before you begin... below appears. To turn it off, follow • Connect Camcorder to power source. steps 1-4 below. EVF or LCD Monitor (PV-L354) (PV-L454) 1 Set POWER to CAMERA. 2, 3, 4 2 Press MENU for MENU mode. Press UP or DOWN to select SELF DEMO . 3 Press M.FOCUS to select OFF. 1 4 Press MENU to exit. Note: • Self Demo stops automatically if battery is attached (page 10) and cassette tape is inserted (page 12). • Inserting a tape alone (or att
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Quick Operation Guide Charging the Battery Pack Charge Battery Pack fully before operation (page 10). 1 Plug in AC Adaptor. 2 Insert Battery. CHARGE Lamp flashes, then stays lit when charging is complete. Insert Cassette 1Attach fully charged Battery (page 10). 2Slide TAPE EJECT to open door. 3Insert cassette (page 12). 4Press here to close door. Camera Recording See page 18. 1 Press LCD-OPEN to unlock the LCD monitor. Swing it fully open and adjust the angle. 2 Set POWER to CAME
Inhaltszusammenfassung zur Seite Nr. 10
Supplying Power • We recommend using Panasonic’s Battery. • We cannot guarantee the quality of this Camcorder when batteries of other companies are used. Charging the Battery Pack 1 Plug in AC Adaptor. Charge Battery Pack fully before use. POWER Lamp lights. 3 2 Insert Battery. 2 A Align left side of Battery with left edge of AC Adaptor. B Press Battery down and slide in direction of arrow. POWER The CHARGE Lamp flashes, then stays lit 1 Lamp when charging is complete. 3 Remove Battery. Slide Ba
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Supplying Power Battery Care CAUTION Battery Life and Protection • Do not place the Battery near or dispose of in fire. • If Battery is used in extremely high • Do not connect (short-circuit) the positive (+) and temperatures, a safety device will negative (–) terminals. • Never attempt to disassemble or reassemble the Battery. automatically prevent operation. • Do not drop or jar Battery. • While not in use, remove Battery from • Use Battery with specified units only. the Camcor
Inhaltszusammenfassung zur Seite Nr. 12
Cassette Information Cassette Insertion/Removal 1 Turn Tape Wheel in direction of arrow until there is no slack. 1 3 2 Attach Battery (page 10). 3 Slide TAPE EJECT to open door. 2 4 Insert cassette as shown. 5 Press here to close door. 5 4 • To remove the cassette, slide the TAPE EJECT switch. Record/Playback Time Use tapes with the mark in this unit. Cassette type Tape Speed TC-20 TC-30 TC-40 SP 20 minutes 30 minutes 40 minutes (Standard Play) SLP 1 hour 1 hour 2 hours (Super Long Play) 30 min
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Before Using How to remove the Sensor tag Hand Strap 1 Open the Hand Strap as illustrated at left. 2 Remove the Sensor tag. Then, replace the Hand Strap. Sensor tag Adjust the Length of the Attaching Shoulder Strap Shoulder Strap Remove Battery Pack before completing the following steps: 1 Undo strap ends from buckles. 2 Thread strap ends through Strap Pull a loop of strap from buckle, then pull Rings on Camcorder. strap tight to shorten or lengthen. Hand Strap 2 3 Re-insert the
Inhaltszusammenfassung zur Seite Nr. 14
Using MENU Mode Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA or VCR. 1 Press MENU for MENU mode. The CAMERA or VCR MENU screen (see below left) appears when Menu mode is entered. 1, 2, 3, 4 2 Press UP or DOWN to highlight the desired menu item. 3 Press M.FOCUS to set selection. 4 Press MENU to exit. Note: • The Menu mode is canceled if UP/DOWN, M.FOCUS, or MENU are not pressed within 5 minutes when Self Demo mode is off with no cassette tape and/or battery inser
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started Setting the Clock Set the following items in order: Time Before you begin... Zone, Daylight Saving Time, Date, • Connect Camcorder to power source. and Time. • Set POWER to CAMERA or VCR. 1 Press MENU for MENU mode. Press UP or DOWN to select CLOCK SET . 1, 2, 3, 4 [ CAMERA MODE ] [ VCR MODE ] 2 Press M.FOCUS for CLOCK SET menu. Press UP or DOWN to select TIME ZONE, DST, or DATE/TIME. 3 Press M.FOCUS for menu of item selected in step 2. To change the setting: TIME ZONE ➔ Go to
Inhaltszusammenfassung zur Seite Nr. 16
Setting the Clock Setting the Time Zone 3a Press UP or DOWN to The Camcorder is preset to Eastern time. select local time zone. [ Time Zone chart ] Press M.FOCUS to confirm entry. • When traveling, repeat this operation and select one of the 8 listed time zones to set the clock to local time. Note : • Clock may lose or gain up to 2 minutes per month. • When traveling outside the listed time zones, set clock to local time manually. • To adjust or set clock, see “Setting Date and Time” (below). Au
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started AccuBrite™ Built-in Light Before you begin... Using the Light • Connect Camcorder to power source. For recording in dim lighting. • Set POWER to CAMERA. 1 Press MENU for 1, 2 MENU mode. Press UP or DOWN to select LIGHT MODE . 2 Press M.FOCUS to set OFF/ON or OFF/ON/AUTO. Press MENU to exit. 3 Press LIGHT repeatedly for Light ON, AUTO, or OFF. 3 • In AUTO, light turns itself on/off Note: according to lighting conditions. • Using Light reduces battery operating time. • Provide pro
Inhaltszusammenfassung zur Seite Nr. 18
Camera Recording Before you begin... Recording via EVF or LCD • Connect Camcorder to power source. Monitor • Insert cassette with record tab (page 12). View recording scene on EVF (Electronic Viewer Finder) or LCD (Liquid Crystal Display) monitor. 1 Press LCD-OPEN to unlock the LCD monitor. Swing LCD monitor fully open and adjust viewing angle. 1 2 Set POWER to CAMERA. • Be sure POWER CAUTION is fully turned to EVF or LCD Monitor Rotating partially open LCD monitor (Record/Pause mode) CAMERA pos
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operation Camera Recording Before you begin... Stand-by Quick Release • Connect Camcorder to power source. If left in RECORD/PAUSE mode for 5 • Insert cassette with record tab (page 12). minutes, Camcorder switches to Stand-by mode to conserve battery. When set to ON, Stand-by Quick Release lets you B resume recording by pressing RECORD/ PAUSE two times. Stand-by Quick Release is set to OFF at the factory. a c b 2, 3, 4 1 Set POWER to CAMERA. 2 Press MENU for MENU mode. Press UP or DOWN to
Inhaltszusammenfassung zur Seite Nr. 20
Camera Recording Before you begin... Programmed Recording • Connect Camcorder to power source. Set a recording start and stop time. Or, Use AC Adaptor for longer recordings. set a 5 or 10 second interval recording • Insert cassette with record tab (page 12). • Set POWER to CAMERA. to be done each minute. 1 Press MENU for MENU mode. Press UP or DOWN to select 1, 2, 3 PROGRAMMED REC . 2 Press M.FOCUS. (Current time is displayed.) Each additional press of M.FOCUS increases start time by 30 minutes.
