Inhaltszusammenfassung zur Seite Nr. 1
Integrated High Speed Dome Camera
ESD-370
Indoor Dome
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
User’s Manual Notice The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice. Copyright Under copyright laws, the contents of this user manual may not be copied, photocopied, translated, reproduced or reduced to any electronic medium or machine-readable format, in whole or in part, without prior written permission of the compa
Inhaltszusammenfassung zur Seite Nr. 3
User’s Manual Cautions • Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • Do not disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing. • Do not block cooling holes on the bracket This camera has a cooling fan inside. Blocking the cooling holes leads to
Inhaltszusammenfassung zur Seite Nr. 4
User’s Manual Content 1. Overview .................................................................................................................................... 5 1.1 Product Features............................................................................................................. 6 1.2 Product Application ......................................................................................................... 7 2. Connecting the High Speed Dome
Inhaltszusammenfassung zur Seite Nr. 5
User’s Manual 3.3.13 HOME SETTING ............................................................................................. 27 3.3.14 SEQUENCE .................................................................................................... 29 3.3.15 AUTOPAN........................................................................................................ 30 3.3.16 CRUISE..........................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
User’s Manual 1. Overview ESD-370 is a new subcompact integrated high speed dome camera designed to deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation. ESD-370 series dome cameras support one cabling for easy installation, and can be integrated with CCTV products, such as DVRs, Control Keyboards, and CCTV accessories for a total surveillance solution. The Integrated
Inhaltszusammenfassung zur Seite Nr. 7
User’s Manual alarm is triggered. Large set of built-in protocols provide connectivity to other surveillance systems. The built-in protocols include ELMO, Pelco, VCL, Philips, AD-422 (Manchester), etc, which allow the Integrated High Speed Dome Camera series to be integrated with other suppliers' surveillance systems. Dependability and ultra high reliability are key factors in the speed dome design cycle. Every speed dome is assembled with meticulous care and thor
Inhaltszusammenfassung zur Seite Nr. 8
User’s Manual • AD/AD-422 • Chiper Privacy Mask for Privacy Protection • Up to 24 privacy zones of camera view programmable Dynamic Dome Configuration • Flexible In/Outdoor mountings • Compact lightweight design for easy installation • Weather resistant housing for temperature, sun ray, and rain Integrated with Web, Enhanced Internet Capability (Optional) • Remote monitoring operation/system configuration/software upgrade • Include Window active applicatio
Inhaltszusammenfassung zur Seite Nr. 9
User’s Manual 2. Connecting the High Speed Dome Please refer to the following sections to connect, set and operate the dome camera. In order to control the integrated high speed dome, basically a control keyboard or other control device is required. 2.1 Package Content Before proceeding, please check the box contains the items listed here. If any item is missing, or if damage is evident, DO NOT install or operate the product and contact your dealer for assistance.
Inhaltszusammenfassung zur Seite Nr. 10
User’s Manual 2.2 Switch Definition First of all, configuring the dome ID and communication protocol is required before connecting the dome camera to other devices. The switches used for configuring these settings are located on the bottom of the dome camera. Indoor Dome Reserved A B RS-485 Setting Dome ID Setting C D Dome Control Protocol N/A E F 22-Pin Connector 2.3 RS-485 Setting The RS-485 setting default is half-duplex, please do not chang
Inhaltszusammenfassung zur Seite Nr. 11
User’s Manual Pin 3 Termination Half-duplex Full-duplex Pin 4 Line Lock Pin 5 Set Factory Default Pin 6 Reserved 2.4 Dome ID Setting Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the dome ID is 123, the ID switch should be set as below. NOTE: No two domes should be given the same ID, or communication conflict may occur. Centesimal decimal single digit NOTE: The numbe
Inhaltszusammenfassung zur Seite Nr. 12
User’s Manual 07 ELMO 9600 08 AD422 4800 09 DM P 9600 11 Pelco D 4800 12 Pelco D 9600 13 Pelco P 2400 14 Pelco P 9600 15 JVC 9600 16 GANZ 9600 Select protocol: Pelco D, for instance, the ID switch should be set as below. Decimal single digit 2.6 22-Pin Connector Definition A 50-cm data cable (as belowing figure) is shipped with the integrated high speed dome for a quick installation for demo or testing usage. The 22-pin connector
Inhaltszusammenfassung zur Seite Nr. 13
User’s Manual T+ Yellow 7 8 R- Orange 1007 24AWG T- Green 9 10 R+ Brown Alarm Pin (Not wired) 11~20 21 VGND Video 22 12
Inhaltszusammenfassung zur Seite Nr. 14
User’s Manual 2.7 Alarm Pin Definition The alarm pins are serviceable for connecting alarm in- and output devices. Following lists the definition of alarm pin on the 22-pin connector located on the bottom of the dome camera. Pin Cable Color Definition 2 White ALM NO Black ALM NC 4 6 Green ALM COM Green/Black ISOG 11 12 Purple ALM-1 Gray ALM-3 13 14 Red ALM-2 Blue ALM-4 15 16 Blue/White ALM-5 Brown/White ALM-6 17 18 Red/White ALM-7 Purple/
Inhaltszusammenfassung zur Seite Nr. 15
User’s Manual 3. Operation and Configuration 3.1 OSD Display Format The information shown on the screen are described in terms of OSD display, position and function description in the table below. 1 2 3 4 56 Position Function OSD Display Description A Auto Focus Mode 1 Focus Modes M Manual Focus Mode X Back Light Compensation OFF 2 Backlight B Back Light Compensation ON 3 Alarm ALARM Alarm Message Present Zoom Ratio 4 Zoom Ratio ×1 (Optical Zoom Digita
Inhaltszusammenfassung zur Seite Nr. 16
User’s Manual 3.2 OSD Menu Tree The OSD setup menu structure of S and DR models are listed below. The star symbol indicates the factory default. For detailed function description, please see section 3.3 Configuration Menu. Item Layer 1 Layer 2 Layer 3 Default DEFAULT , ON CAMERA ON BLC Level <000> ~ <100> BACKLIGHT OFF ☆ AUTO Focus Length <1cm>, <10cm>, <30cm> <1m> 10 cm FOCUS MANUAL <01> ~ <08> AUTO ☆ APERTURE MANUAL H APER
Inhaltszusammenfassung zur Seite Nr. 17
User’s Manual Item Layer 1 Layer 2 Layer 3 Default PRESET POINT <001> ~ <256> 001 SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> ALWAYS DWELL TIME <001> ~ <127> Sec., ALWAYS EXIT YES HOME FUNC. , OFF SELECT MODE PRESET ☆ SEQUENCE AUTOPAN CRUISE PRESET POINT <001> ~ <256> 001 HOME SETTING SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> RETURN TIME <001> ~ <128> Min. 001 GO ENTER EXIT YES SEQUENCE LINE <1> ~
Inhaltszusammenfassung zur Seite Nr. 18
User’s Manual Item Layer 1 Layer 2 Layer 3 Default MASK <01> ~< 08> 01 CLEAR+RESET MASK DSIPLAY , First EXIT YES TIME DISPLAY , OFF SET YEAR SET MONTH TIME SET DAY SET HOUR SET MINUTE EXIT+SAVE SCHEDULE SWITCH , OFF SCHEDULE POINT <01> ~ <32> 01 SCHEDULE HOUR 00 SCHEDULE MIN 00 SCHEDULE MODE NONE ☆ PRESET SEQUENCE AUTOPAN CRUISE SCHEDULE IR FUNC. NO FUNCTION PRESET <1> ~ <256> SEQUENCE
Inhaltszusammenfassung zur Seite Nr. 19
User’s Manual 3.3 Configuration Menu The detailed functions and parameter settings of your high speed dome can be set by the OSD (On Screen Display) menu with a control device, such as ELMO control keyboard. The functions in OSD menu are described in the following sections. E/F/U Model R/K Model MAIN PAGE 1 MAIN PAGE 1 DEFAULT CAMERA OFF DEFAULT CAMERA OFF BACKLIGHT OFF BACKLIGHT OFF FOCUS AUTO FOCUS AUTO AE MODE AUTO APERTURE AUTO WB
Inhaltszusammenfassung zur Seite Nr. 20
User’s Manual camera parameters. 3.3.2 BACKLIGHT The Backlight compensation function prevents the center object from being too dark in surroundings where excessive light is behind the center object. The Backlight Compensation Level ranges from 000 to 100. BLC LEVEL LEVEL 20 EXIT YES NOTE: If this function is enabled, the WDR function (for DR model only) will be disabled automatically. For details, refer to section 3.3.19 WDR Setting. 3.
