Inhaltszusammenfassung zur Seite Nr. 1
EAN850A
User’s Manual
Copyright © EverFocus Electronics Corp,
Release: Dec. 2009 Rev.D
Inhaltszusammenfassung zur Seite Nr. 2
EAN850A Product Name: EAN 850A EverFocus IP Network Cameras Model Number(s): EAN850A FCC Notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and us
Inhaltszusammenfassung zur Seite Nr. 3
EAN850A About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Safety Notice -These limits are designed to provide reasonable protection. This equipment generates, uses and
Inhaltszusammenfassung zur Seite Nr. 4
EAN850A Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within 0℃ ~ +40℃ / 32 ~ 104 and a humidity below 90%. The input power source for this appliance is 12 VDC & PoE.. Use only the recommended power supplies. Power supplies must comply with the requirement of the latest version of IEC60950-1. Substitu
Inhaltszusammenfassung zur Seite Nr. 5
EAN850A External Dimensions: 56 mm x 68 mm x 101 mm / 2.24” x 2.72” x 4.04” TABLE OF CONTENTS 1. INTRODUCTION....................................................................................................7 2. FEATURES ..............................................................................................................7 3. ACCESSING THE CAMERA MENU ...................................................................8 4. SETTING.................................................
Inhaltszusammenfassung zur Seite Nr. 6
EAN850A 4.8 SYSTEM............................................................................................................51 4.8.1 Date/Time....................................................................................................51 4.8.2 Daylight Saving ..........................................................................................53 4.8.3 SD Card.......................................................................................................54 4.8.4 Mainte
Inhaltszusammenfassung zur Seite Nr. 7
EAN850A 1. INTRODUCTION The new EAN850A network camera provides H.264, MPEG-4 and MJPEG compression for multi-streaming capabilities. H.264 is the most advanced video compression technology that saves your bandwidth without sacrificing video quality. EAN850A is a super low lux (0.002 lux) camera with True Day/Night and built-in DNR (Dynamic Noise Reduction). EAN850A produces crystal clear images in low light conditions with substantial disk-saving. Supported with PoE (Power over Ethern
Inhaltszusammenfassung zur Seite Nr. 8
EAN850A 3. ACCESSING THE CAMERA MENU Step 1.Start an Internet Explorer browser. Step 2. Enter the IP address or host name of the camera in the Location/Address field of your Internet Explorer browser. (Please refer to EAN850A Installation Guide for how to find the IP address) Step 3. Input “Username” and “Password”. Default Username is “user1” and default password is “11111111”. Step 4. Click “Login” button. Step 5. You might be required to download Active X, which is required to vie
Inhaltszusammenfassung zur Seite Nr. 9
EAN850A 3 ○ Press button to close EAN850A network page. 4 ○ Video Stream Select Video Stream from Stream 1 / Stream 2, Stream 3 and Stream 4. Please refer to "4.4.1 Multi Streaming” for further information. 5 ○ View Size You can select View size to either reduce or enlarge the image to the appropriate view size. Select the view size for live images from: 704*480/640*480/352*240/320*240/176*120 6 ○ Digital Zoom Press “+” or “-“ button to enlarge / reduce the
Inhaltszusammenfassung zur Seite Nr. 10
EAN850A 8 ○ Snapshot The Snapshot button saves a snapshot of the video image currently being displayed. The location where the snapshot data is saved can be specified in Setting -> User’s Config. Please refer to “4.2 User Config” for further information. 9 10 ○ ~ ○ Play Audio/Transmit Audio Click the “Play Audio” and “Transmit Audio” buttons to switch the sound off and on for the speaker and microphone, respectively. 11 ○ Manual Control – Trigger Event Press “Trigger Eve
Inhaltszusammenfassung zur Seite Nr. 11
EAN850A 11
Inhaltszusammenfassung zur Seite Nr. 12
EAN850A 4. SETTING Click this button to display the setup menu. 4.1 System Info System information and system log check of the setup menu can be performed on this page. The “System Info” page has 2 tabs: [Information] tab and the [Log] tab. 4.1.1 Information System Information: Firmware version, MAC address, Video Type, Model number. (unchangeable, for reference only) 12
Inhaltszusammenfassung zur Seite Nr. 13
EAN850A 4.1.2 Log System Log: Date/Time: displaying date and time of the log. Log message: all information and event message, including login, user’s IP, reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records. 13
Inhaltszusammenfassung zur Seite Nr. 14
EAN850A Press button to export system log into “.txt” file and select the location where the exported log file will be saved to. 4.2 User Config Live view configuration is to be set by user. Each login user can make his/her own settings for the following items: Text Setting Check the box for text of Machine name, Date/Time or Frame Rate to be displayed on the screen. Text Color Foreground Color: Select the foreground color of text to be displayed by moving the slide
Inhaltszusammenfassung zur Seite Nr. 15
EAN850A Press Apply to apply the setting changes or Reset to reset without saving the change. Date/Time Format Used in Text Select Date/Time Format from the following options: Time Format: 24 Hours or 12 Hours. Press Apply to apply the setting changes or Reset to reset without saving the change. Recording/Snapshot Export Setting Enable Event Recording to PC: Allow event video recorded to users' PC if any events have been set to record to PC. Export folder: Select Export fo
Inhaltszusammenfassung zur Seite Nr. 16
EAN850A Note: 1. Maximum five languages can be in the language list. 2. Upload a new language file will reboot system automatically. Please reconnect IP camera after reboot. Press Apply to apply the setting changes or Reset to reset without saving the change. 4.3 Network The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP and Network Alarm can be configured on this page. The "Network setup" page has 5 tabs of the [Network] tab, the [DDNS] tab,
Inhaltszusammenfassung zur Seite Nr. 17
EAN850A • Subnet mask • Gateway (when using the gateway server/router) • Primary DNS, Secondary DNS (when using DNS) • HTTP Port IP SETTING IP Type DHCP: Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs whose IP address is unique. Refer to the network administrator for the settings of the server. Default: DHCP. Static IP: User can manually set the static IP for network connection. PPPoE: This is a DSL connection appl
Inhaltszusammenfassung zur Seite Nr. 18
EAN850A Secondary DNS If your ISP provides you an IP address secondary DNS, please set it here. Username Enter User name of the account (used only for PPPoE). Password Enter Password of the account (used only for PPPoE). Press Apply to apply the setting changes or Reset to reset without saving the change. Port Setting HTTP Port Port number for HTTP/WEB communication. Press Apply to apply the setting changes or Reset to reset without saving the change. 18
Inhaltszusammenfassung zur Seite Nr. 19
EAN850A 4.3.2 DDNS DDNS setting When accessing the camera via the Internet from the network environment of which the global IP address is obtained using DHCP, the DDNS function is necessary. To use the DDNS function, it is necessary to connect to the dedicated DDNS server. We offer 4 DDNS server providers as follow: ○ www.everfocusddns.com ○ www.sitelutions.com ○ www.dyndns.com ○ www.no-ip.com Enable: Check the box to enable DDNS setting. Service ISP: If you choose EverFoc
Inhaltszusammenfassung zur Seite Nr. 20
EAN850A configure Record ID, FQDN, Username and password and register in DDNS server. Refer to the web site for further information about the DDNS. Press Apply to apply the setting changes or Reset to reset without saving the change. 4.3.3 Bandwidth Bandwidth Setting Max. Bandwidth: Specify, Unlimited / 64 K/ 128 K/ 256 K / 512 K / 1M / 2M / 4M / 8M bps. the maximum bandwidth that the camera is allowed to use on the network. This is a useful function when connecting the camera t
