Bedienungsanleitung Panasonic WV-CW374

Inhaltszusammenfassung zur Seite Nr. 1

To facilitate wirings, it is recommended to align two junction boxes.
Fixing the camera, camera mounting arm, and adapter box

Preparations
As the factory default, the camera head has been tilted to the downside.
Hole
46 mm {1-13/16"}
The camera can be mounted either of the following ways.
6 mm (W) x 10 mm (H)
1. Move the camera head, as shown in the illustrations, by loosening the tilting lock screw.
{1/4" (W) x 13/32" (H)}
• Using the supplied adapter box.
• Fixing the camera mounting arm dir

Inhaltszusammenfassung zur Seite Nr. 2

F T N W 3. Connect the video input jack of LCD moni-   Connections Attaching the Supplied Sun Shield tor and the monitor output jack (3.5 mm 9mm {11/32"} {0.14"} diam. minijack) of camera with a 2- Fixing screws or less 9mm {11/32"} (Supplied) x 4 pole cable. Perform cable connections by referring the illustrations. Attach the sun shield to the camera head by or less (M3 x 6) tightening the four supplied screws. Note: Refer to the illustrations for the width L-type plug of plug to be inserted