Inhaltszusammenfassung zur Seite Nr. 1
Color CCTV Cameras
Operating Instructions
Model No. WV-CW484 Series
WV-CW484F is shown above.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
FRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
For Canada This Class A digital apparatus complies with CAUTION Canadian ICES-003. RISK OF ELECTRIC SHOCK DO NOT OPEN For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, These limits are designed to provide reasonable DO NOT REMOVE COVER (OR BACK). protection against harmful interference when the NO USER-SERVICEABLE PARTS INSIDE. equipment is operated
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
Inhaltszusammenfassung zur Seite Nr. 4
Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" THIS PUBLICATION COULD INCLUDE WITHOUT WARRANTY OF ANY KIND, TECHNICAL INACCURACIES OR TYPO- EITHER EXPRESS OR IMPLIED, INCLUDING GRAPHICAL ERRORS. CHANGES ARE BUT NOT LIMITED TO, THE IMPLIED WAR- ADDED TO THE INFORMATION HEREIN, AT RANTIES OF MERCHANTABILITY, FITNESS ANY TIME, FOR THE IMPROVEMENTS OF FOR ANY PARTICULAR PURPOSE, OR THIS PUBLICATION AND/OR THE CORRE- NON-INFRINGEMENT OF THE THIRD SPONDING PRODUCT (S). PARTY'S RIGHT. Dis
Inhaltszusammenfassung zur Seite Nr. 5
Preface Panasonic's WV-CW484 series cameras (WV-CW484F/WV-CW484S/WV-CW484FK/WV- CW484SK) introduce high picture quality by use of Super-Dynamic 1/3 inch CCD and digital signal processing LSIs. • WV-CW484F: This is a model with x2 varifocal lens. Mounting bracket and ceiling mount bracket are optional. • WV-CW484S: This is a model with x2 varifocal lens. Mounting bracket is supplied, but ceil- ing mount bracket are optional. • WV-CW484FK: Lens, mounting bracket, and ceiling mount bracket are opti
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS Important Safety Instructions ..................................................................................................... 3 Limitation of Liability ................................................................................................................... 4 Disclaimer of Warranty ............................................................................................................... 4 Preface ......................................................................
Inhaltszusammenfassung zur Seite Nr. 7
Precautions This apparatus has no power switch. Handle the camera with care. Power is supplied from an external 12 V Do not abuse the camera. Avoid striking, DC/24 V AC power-supply device. Refer to shaking, etc. The camera could be damaged service personnel for how to turn on/off the by improper handling or storage. power. Do not touch the dome cover with your To keep on using with stable performance bare hands. • Parts of this product may deteriorate and A dirty dome cover causes deterioration
Inhaltszusammenfassung zur Seite Nr. 8
Do not aim the apparatus at strong light Observe the following for installation. sources. •This apparatus is designed to be A light source such as a spot light causes a installed under eaves. Install this appara- blooming (light bleeding) or a smear (vertical tus under eaves to avoid direct sunlight. lines). • If this apparatus is installed outdoors without eaves, ensure the same circum- stances as being under eaves. Smear Bright subject Avoid installing in the following locations. • Locations w
Inhaltszusammenfassung zur Seite Nr. 9
Be sure to remove this apparatus if it is not in use. Radio interference When the camera is used near TV/radio antenna, strong electric field or magnetic field (near a motor or a transformer), images may be distorted and noise sound may be produced. Mounting screws Only the fixing screws are provided to fix the camera with the provided mounting bracket. It is necessary to procure screws or bolts to mount the camera. Prepare them according to the material and strength of the area where the camera
Inhaltszusammenfassung zur Seite Nr. 10
Major Operating Controls and Their Functions q w e r y t u i o !0 !1 !2 !3 !55 !6 !4 !7 !8 !9 10
Inhaltszusammenfassung zur Seite Nr. 11
q Power cable (12 V DC or 24 V AC) !1 Monitor output jack (3.5 diam. mini Cautions: jack) Supplies 24 V AC or 12 V DC from an Connects the LCD monitor and such external power source. devices with 3.5 diam. 2-pole L-type plug for checking images. w Video output cable with BNC connec- tor !2 Optional heater connector (6 pin Connects with the video connector. female) When an optional heater unit is installed e Enclosure in the camera, the harness exiting from the unit will be connected to this. r F
Inhaltszusammenfassung zur Seite Nr. 12
Lens Mounting (WV-CW484FK, CW484SK) 1. Before mounting the lens, remove the protection sheet from the camera. 2. Mount the optional lens to the camera by turning the lens clockwise. 3. Insert the connector of lens into the connector of camera, and bind the connectors with the fixing band. 12
Inhaltszusammenfassung zur Seite Nr. 13
Installations • The following installation should be made by qualified service personnel or system installers. • Mounting Bracket (WV-Q114) is optional for WV-CW484F, WV-CW484FK. Use the screws provided to the Mounting Bracket. • Mounting Bracket is provided to WV-CW484S, WV-CW484SK. Use the screws provided to this product. Important: • Prepare four fixing screws to be used to mount the provided camera attachment according to the material of the area where the attachment is to be installed. Rec
Inhaltszusammenfassung zur Seite Nr. 14
T TOP OP Installations Using a Junction Box 46 mm {1.81"} Secure the provided camera attachment to the two gang junction box (4 in. x 4 in.) built Junction box in a wall or ceiling. 83.5 mm {3.29"} Camera attachment (provided) Screws for the camera attachment (Locally procured) Using Mounting Bracket • Secure the camera mounting bracket to wall or ceiling, and fix the provided camera attach- ment to the mounting bracket with the screws for to the mounting bracket.
Inhaltszusammenfassung zur Seite Nr. 15
TOP TOP Mounting bracket Camera attachment (provided) 15 TOP
Inhaltszusammenfassung zur Seite Nr. 16
How to mount the camera 1. Connect the power cable and the BNC plug of the video output cable. (Refer to p. 23 Connections.) 2. Secure the camera with four attachment fix- ing screws. 3. Fit the protrusion at the rear of camera unit in Dent the dent of camera attachment. 4. Hook the rear screws on the screw holes of camera attachment, and turn the camera unit clockwise to fix the camera unit and camera Protrusion attachment. Screw hole of camera attachment Rear screw
Inhaltszusammenfassung zur Seite Nr. 17
4. Hook the rear screws on the screw holes of camera attachment, and turn the cam- era unit clockwise to fix the camera unit Protrusion and camera attachment. Screw hole of camera attachment Rear screw 5. Remove the enclosure from the main body by loosening the three fixing screws. The enclosure is fixed with tamperproof screws. Loosen the three fixing screws by using the provided bit for tamperproof screw. Note: Perform the same procedure when replacing with the optional dome cover WV-CW4C. 6.
Inhaltszusammenfassung zur Seite Nr. 18
7. Secure the camera unit to the bracket with the camera lock screw. (The illustration describes an example using a junction box.) Camera fixing screw 8. Adjust the camera. (Refer to p. 21.) 9. Attach the enclosure to the camera. Firmly tighten the three tamper-proof screws. (Recommended tightening torque 0.78 N·m {0.58 lbf·ft}) Notes: • Defocus may be caused by the reinstalled enclosure. When using a system controller, adjust the back-focus on the setup menu after attaching the enclosure. • Whe
Inhaltszusammenfassung zur Seite Nr. 19
Waterproof Process • When routing cables sideway using Mounting Bracket or installing the camera under eaves, apply waterproof process to the cable and relevant portions. • The cables are not waterproofed. Provide water sealing for the tube ends and the portions between cable cores as well as connecting portions. • The use of vinyl tape or other tapes instead of the butyl tape may cause water absorption from a gap and finally condensation and water leakage. Waterproof processing of cable con
Inhaltszusammenfassung zur Seite Nr. 20
Notes: • Surely attach a pipe fitting to the bracket to avoid exposing the cables. Otherwise, cable deterioration resulting from cable exposure may cause a short circuit. • Run the conduit downward or pull the conduit out of the side of the bracket. When pulling the conduit out of the side of the bracket, run the conduit downward once, and upward. Downward • For wall installation, face the drain slit downward and do not block the slit. When rain water is accumulated in the bracket, the water blo
