Inhaltszusammenfassung zur Seite Nr. 1
High Resolution Day & Night IR Camera SCO-2080R
User Guide
Before installing and operating this product,
please read this manual thoroughly.
ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model description. n SCO-2080R SERIES • NTSC MODEL • P AL MODEL SCO-2080RN SCO-2080RP n MODEL DESCRIPTION • SCO-2080R X The lightning flash with an arro whead symbol, within an equilater al triangle is _ intended to alert the user to the presence of uninsulated
Inhaltszusammenfassung zur Seite Nr. 3
Contents Features Contents • Features ……………………………………………………………… 5 Ultra High Sensitivity Outdoor Visibility range 50M • Warnings & cautions ………………………………………………… 6 The IR LEDs of the SCO-2080R automatically The built-in high sensitivity COLOR CCD produces a illuminates viewing area in the extreme darkness clear image even in 0Lux(B/W , IR-LED ON)or lower • Precautions…………………………………………………………… 7 allo wing the camer a a long-r ange visibility of up to 5
Inhaltszusammenfassung zur Seite Nr. 4
Samsung T ec hwin car es for the environment at all product manufacturing stages to pr eserve Precautions the environment, and is taking a number of steps to pro vide customers with mor e environment-friendly products. The Eco mark r epr esents Samsung T ec hwin's will to cr eate environment-friendly products, and indicates that the product satisfies the EU RoHS Dir ective . Do not install under extreme Do not install in high humidity environme
Inhaltszusammenfassung zur Seite Nr. 5
Components and Accessories Precautions ❶ 2 3 ❹ 5 Do not drop the camera or Never keep the camera face to subject it to physical shock. strong light directly. ❻ ➐ ❶ SCO-2080R 2 Sunshield 3 L - t y p e h ex a g o n w re n ch e s ( 3 . 0 m m ) 4 Sunshield Adaptor (1EA) 5 T apping Scr ew (3EA) ❻ User’ s Manual May cause a product malfunction. May damage the CCD. ➐ Installation Video Output Cable Overview Do not expose the camera to radioactivity. FRONT ❶ 2 3 Radioactivity ex
Inhaltszusammenfassung zur Seite Nr. 6
Overview Adjust to Lens Notes Adjust the lens's zoom and focus • When you adjust to the ZOOM & FOCUS of the lens, Please r emo ve the front co ver from the 1. Remove the sunshield from the camera. camer a, b y turning the co ver counter cloc kwise . 2. Remove the front cover from the camera by turning it counterclockwise. • T o adjust the zoom & focus loosen the individual levers befor e tightening them again. 3. Unlock the Zoom or Focus lever before adjusting the lens. • T
Inhaltszusammenfassung zur Seite Nr. 7
Connection Connecting to Monitor Connecting to Power The recommended adaptor specification for SCO-2080RN/P is DC 12V/4A, AC Please connect the video output terminal located on the back of the camera to the monitor. 24V/2A over. Please check the standard power requirement before connecting the power. ( Recommend AC 24A/2A over adaptor for a long-distance.) Monitor CCD Camer a • T he connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for
Inhaltszusammenfassung zur Seite Nr. 8
WHITE (TRX+) BLUE (TRX-) Connection RS-485 communication control Using Coaxial Communications • Coaxial Communications System Connecting to RS-485 Control Cable • OSD Control method CAMERA DVR CONTROLLER CONTROL CABLE SPEC SET MENU/ENTER OSD KEY WHITE (TRX+) RS-485+ UP UP KEY JOYSTICK UP BLUE (TRX-) RS-485- DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Co
Inhaltszusammenfassung zur Seite Nr. 9
Operating Your Camera Menu Configuration MAIN SETUP Select the function using Change the status using 1.LENS DC MAIN SETUP the Function Setup switc h. the Function Setup switc h. 2.EXPOSURE 3.WHITE BAL ATW LENS ●DC 4.SSDR OFF ● … ● … ● ……… BRIGHTNESS SHUTTER AGC 5.BACKLIGHT OFF EXPOSURE 6.SSNR3 ON ●SENS-UP ●RETURN 7.DAY/NIGHT AUTO ● … ● … ● … ATW OUTDOOR INDOOR 8.SPECIAL WHITE BAL ●MANUAL… ● AWC →SET 9.EXIT SAVE SSDR ●OFF… ● ON BACKLIGHT ●OFF… ● BLC… ● HLC 2. Sele
Inhaltszusammenfassung zur Seite Nr. 10
Operating Your Camera Notes - FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust • When the SHUTTER is set to MANUAL or A.FLK mode , SENS-UP will be disabled. the lens focus, and then deactivate the settings mode. AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but Notes the higher the noise. - OFF : Deactivates the AGC function. • If color
Inhaltszusammenfassung zur Seite Nr. 11
Operating Your Camera ※ Select one of the following 5 modes, as appropriate for your purpose. ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K. OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion) INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K. MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode. After th
Inhaltszusammenfassung zur Seite Nr. 12
Operating Your Camera (Black, Red, Blue, Cyan, Magenta) SSNR3 - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced This function reduces the background noise in a low luminance environment. OFF : Not being used 1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup switch so that the arrow indicates ‘SSNR3’. 3. Select a desired mode using the Function Setup switch and press the Function Setup switch. Select ‘BLC’ to adjust the area to be HLC : Enab
Inhaltszusammenfassung zur Seite Nr. 13
Operating Your Camera - BURST MODE : You can turn on or off the burst signal on DAY/NIGHT AUTO SETUP B/W mode. ▶… 1.BURST MODE ON 2.COLOR→B/W - DURATION : You can select brightness of illumination DURATION FAST You can display pictures in color or black and white. DWELL TIME 3SEC about changing the day/night mode. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function 3.B/W→COLOR DURATION FAST - DWELL TIME : You can select the duration tim
Inhaltszusammenfassung zur Seite Nr. 14
Operating Your Camera IMA GE ADJ. : SPECIAL 1) When the SETUP menu screen is displayed, select ‘IMAGE ADJ’ by using the Function 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup Setup switch so that the arrow indicates ’IMAGE ADJ‘. switch so that the arrow indicates ‘SPECIAL’. 2) Select a desired mode using the Function Setup switch. IMAGE SETUP MAIN SETUP 1.LENS DC 1.V-REV OFF 2.H-REV OFF 2.EXPOSURE 3.D-ZOOM OFF 3.WHITE BAL ATW 4.FONT C
Inhaltszusammenfassung zur Seite Nr. 15
Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. SYNC : In areas where the supply is at 60Hz(NTSC), 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the 50Hz(PAL), you can synchronize the output phase of multiple cameras using the power arrow indicates ‘CAM TITLE’. CAMERA TITLE SETUP synchronization function (Line-Lock) without using 2) Set it to ‘ON’ by using the Function Setup switch. ABCDEFGHIJKLM a s
Inhaltszusammenfassung zur Seite Nr. 16
Operating Your Camera PRIVACY : Mask an area you want to hide on the screen. COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera PRIVACY AREA SETUP through an external control device. 1.AREA AREA1 …1) … When the SPECIAL menu screen is displayed, press the Function Setup switch 2.MODE OFF so that the arrow indicates ‘COMM ADJ’. 3.MASK COLOR GREEN …… 2) Set up the mode using the Function Setup witch. … 4.MASK
Inhaltszusammenfassung zur Seite Nr. 17
Troubleshooting Specifications SCO-2080RN SCO-2080RP If there are problems in operation, please refer to the items below. If the ELECTRICAL problem persists, please contact the agent you purchased this product from. Input Voltage DC 12V ± 10% / AC 24V ± 10% Power Consumption Max 6.8W / 6.5W (IR-LED ON) VIDEO • Nothing appears on the screen. Imaging Device 1/3 inch, Diagonal 6mm Super HAD CCD ▶ Check that the power cord and line connection between the camer a and monitor are Total Pixels 81
Inhaltszusammenfassung zur Seite Nr. 18
DECLARATION OF CONFORMITY Dimension Application of Council Dir ective(s) 2004 / 108 / EC Manufactur er's Name SAMSUNG TECHWIN CO ., L TD Manufactur er's Addr ess SAMSUNG TECHWIN CO ., L TD 42, SUNGJU-DONG CHANGWON-CITY , KYUNGNAM, KOREA, 641-716 European Repr esentative Name Ø77 European Repr esentative Addr ess 86mm Equipment T ype/Environment CCTV Camer a 274.7mm Model Name SCO-2080RP Beginning Serial NO . C5AM6V3Z200001X Y ear of Manufactur e 2010.02.01 Conformance t
Inhaltszusammenfassung zur Seite Nr. 19
SALES NETWORK • SAMSUNG TECHWIN CO., L TD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 • SAMSUNG TECHWIN AMERICA Inc. • SAMSUNG TECHWIN EUROPE L TD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-
