Inhaltszusammenfassung zur Seite Nr. 1
Instruction Manual
AT-2
High Performance Loudspeaker
with H-PAS™ Technology
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents 2 AT-2 High Performance Loudspeaker with H-PAS™ Technology Table of Contents AT-2 High Performance Loudspeaker with H-PAS™ Technology 2 Introduction 3 Unpacking the Speakers 3 Attaching the Feet Thank you for choosing Atlantic Technology products. Y our new speaker has 3 Attaching the Grilles been precision-crafted to give you years of enjoyable, trouble-free service. 3 Glass Tops This manual covers the Atlantic Technology AT-2 speaker. It will show you 4 Placement
Inhaltszusammenfassung zur Seite Nr. 3
Unpacking and Assembly 3 Instruction Manual Unpacking the Speakers Figure 2 Use care when unpacking the speakers. Since the grilles are packed off the AT-2 High-performance loudspeaker speakers, be particularly careful of the driver elements as you unpack and move the speakers. Remember to keep the original boxes and packing mate- rial, in the unlikely event the speakers need servicing, or if you move. Attaching the Grilles The included metal grilles are held to the front of the enclosures
Inhaltszusammenfassung zur Seite Nr. 4
4 AT-2 High Performance Loudspeaker with H-PAS™ Technology Placement Speaker/room interactions have a huge impact on the sound of the system. Using the AT-2 in a Home Theater System Moving the speakers just a little can make a dramatic difference in what you The AT-2 works extremely well as part of a home theater system. In such hear. Remember that the best acoustic placement of the speakers will vary a system, place the AT-2’s on either side of the television. The left and right from room t
Inhaltszusammenfassung zur Seite Nr. 5
Speaker Placement 5 Instruction Manual Speaker Placement for Home Theater Front Speaker Array should be within 18” vertical height of each other. Left Right Center Surround Speakers Subwoofer should be placed directly to the sides of the seating area and approximately Subwoofer 3 feet (1 meter) above the listener’s ear level. Left Right Surround Surround Left Right Surround Surround Back Back Surround Back Speakers should be placed approximately 3 feet (1 meter) above the listener’s e
Inhaltszusammenfassung zur Seite Nr. 6
6 Placement AT-2 High Performance Loudspeaker with H-PAS™ Technology Connecting Your Speakers We recommend that you connect your system using high quality dual Bi-amp Connection conductor stranded wire of 16 gauge or heavier, for lengths up to 25 feet Remove terminal straps. (See figure 7 opposite) (8m) . Remember, the lower the gauge number, the heavier the wire. Use Bi-amplification uses separate amplifiers for the high- and low-frequency heavier gauge wire for longer runs. Please contact
Inhaltszusammenfassung zur Seite Nr. 7
System Wiring 7 Instruction Manual System Wiring Be sure to connect red (+) on the speaker to red (+) on the amplifier and black (–) on the speaker to black (–) on the amplifier. Figure 6 Conventional Connection HF HF TERMINAL STRAPS INPUT IN PLACE INPUT LF LF LEFT RIGHT Figure 7 Bi-amp Connection HF HF INPUT INPUT LF LF TERMINAL STRAPS REMOVED AMP FOR HIGH FREQUENCIES LEFT RIGHT AMP FOR LOW FREQUENCIES LEFT RIGHT
Inhaltszusammenfassung zur Seite Nr. 8
8 Connecting Your Speakers AT-2 High Performance Loudspeaker with H-PAS™ Technology High Frequency Energy Control Caring for your Speakers This control changes the relative output level of the tweeter. It has been Clean your cabinets using a soft, lint-free cloth. If you wish, you can slightly designed to help compensate for different room acoustics and personal moisten the cloth with plain water. Do not use any other cleaning agents listening preferences. The “0” position is the most “accurat
Inhaltszusammenfassung zur Seite Nr. 9
High Frequency Energy Control 9 Instruction Manual Specifications Model AT-2 Type H-PAS Hybrid Pressure Acceleration System, 2-way Drivers Woofer 5¼” (135mm) long-excursion GLH* cone 1 Tweeter 1 ⁄8” (28mm) low-resonance soft dome with 4mm oversize long-throw surround and integral back chamber/heatsink Frequency Response 41-20kHz, +/-3dB Nominal Impedance 6Ω Crossover Frequency 2.2kHz Crossover Type Parallel, 2nd-order LP, 3rd-order HP Sensitivity 88dB Recommended 20 – 150 Watts R
Inhaltszusammenfassung zur Seite Nr. 10
Specifications 10 AT-2 High Performance Loudspeaker with H-PAS™ Technology
Inhaltszusammenfassung zur Seite Nr. 11
Notes 11 Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 12
343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.com 015-0002
