Bedienungsanleitung MTX Audio MTX Thunder 5500 T5508-44

Inhaltszusammenfassung zur Seite Nr. 1

T5508-44
Parameters
Los parámetros, Paramètres, Parameter
F : 42.25 Hz
s
Q : 6.49
ms
C : 0.156 mm/N
ms
M : 90.77 g
ms
R : 3.72 kg/s
ms
V : 0.355 ft³ (10.04 liters)
as
X : 0.300 in (7.62 mm)
max
D: 6.480 in (164.60 mm)
S : 33.17 in² (214.00 cm ²)
d
V : 9.95 in³ (0.16 liters)
d
Q : 0.73
es
R : 1.50 Ω
e
B : 7.04 Tm
l
P : 200 Watts
rms
Q : 0.656
ts
η : 0.100 %
ο
SPLo: 82.15 dB
SPL : 89.42 dB
2.83V/1m
Specifications

Las especificaciones , Spécifications, Spezifikatione

Inhaltszusammenfassung zur Seite Nr. 2

T5508-44 Sealed Enclosure El Cerco sellado, Clôture scellée, Abgedichtete Einschließung For the best possible sound quality where space is a premium, MTX recommends using a sealed enclosure. For excellent sound quality with increased output compared to sealed enclosures (3dB or more), MTX recommends using a vented enclosure. All recommended enclosures have been designed and thoroughly tested by MTX. 11" (279.4 mm) 11" (279.4 mm) Net Internal Volume: 0.50

Inhaltszusammenfassung zur Seite Nr. 3

T5508-44 Vented Enclosure Descargar Cerco, Clôture donnere vent, Vented Einschließung For the best possible sound quality where space is a premium, MTX recommends using a sealed enclosure. For excellent sound quality with increased output compared to sealed enclosures (3dB or more), MTX recommends using a vented enclosure. All recommended enclosures have been designed and thoroughly tested by MTX. 11 3/4" (298.4 mm) 22 1/2" (571.5 mm) 12" (304.8 mm)

Inhaltszusammenfassung zur Seite Nr. 4

Wiring Configuration La Configuración del alambrado, La Configuración del alambrado, Verdrahtende Konfiguration + + AMP AMP - - With coils wired in parallel Con rollos alambró en la paralela, Avec les bobines With coils wired in series (Con rollos alambró en la serie, Avec les bobines télégraphiées dans l'analogie, Mit Windungen hat parallel verdrahtet): télégraphiées dans le feuilleton, Mit Windungen, die in Serie verdrahtet werden): A dual 4 Ω speaker will represent a 2 Ω load