Bedienungsanleitung Turbosound QIUCKSTAR AND RIGGING TCS-1061

Inhaltszusammenfassung zur Seite Nr. 1

TCS-1061

Quickstart and Rigging User Guide


















(Please refer to www.turbosound.com for the latest updates)
Version 1.0

Inhaltszusammenfassung zur Seite Nr. 2

Quick Start Guide TCS series The Flying Systems FK-1061 Flying kit FB-1061Flyinggrid (up to 5 cabinets deep) (upto16cabinetsdeep) TCS series Quickstart Guide v1.0 - Page - 2

Inhaltszusammenfassung zur Seite Nr. 3

Quick Start Guide TCS series Safety Information Safety Notes on Rigging The Turbosound rigging system has been designed and constructed to a high standard of safety, and tested to the most demanding of specifications. In order to ensure the highest safety standards, this information on the assembly and safe use of rigging accessories must be understood and followed. Only use Turbosound recommended rigging accessories, which are specifically designed for their intended purpose. Do not

Inhaltszusammenfassung zur Seite Nr. 4

Quick Start Guide TCS series Flying system components have been individually tested in accordance with the following regulations: • The Health and Safety at Work Act 1974 • The Supply of Machinery (Safety) Regulations 1992 • The Lifting Operations and Lifting Equipment Regulations 1998 General Description To take full advantage of the extremely flexible properties of the TCS series loudspeaker, the rigging system is designed to be intuitive, inherently safe, flexible, and simple to use

Inhaltszusammenfassung zur Seite Nr. 5

Quick Start Guide TCS series FK-1061 FLYING SYSTEM WILL SUPPORT A COLUMN OF UP TO 5 CABINETS DEEP FK-1061 Flying Kit Enables suspension of one column of TCS-1061 cabinets up to 5 deep from a single flybar, and utilising an identical flybar fitted with pull-back links to provide a pull-back for the whole cluster. One kit is required per loudspeaker array (two kits are required to hang left and right arrays). Blanking plates are provided to fit in place of the rear flying strips on the to

Inhaltszusammenfassung zur Seite Nr. 6

Quick Start Guide TCS series FB-1061 FLYING SYSTEM WILL SUPPORT A COLUMN OF UP TO 16 CABINETS DEEP FB-1061 Flybar The FB-1061 is a fabricated steel frame consisting of welded box sections with front and rear cabinet attachment points and a central spine offering a total of nine pick up points to allow a range of cluster angles. The FB-1061 flybar enables the creation of an array of up to cabinets up to 16 deep. Setting the angle between cabinets Precise adjustment of inter-cabinet a

Inhaltszusammenfassung zur Seite Nr. 7

Quick Start Guide TCS series Tri-amp to bi-amp conversion The conversion is achieved by changing the position of a jumper on the crossover board located inside the left side driver access door (when viewed from the front). The default jumper position as shipped from the factory is TRI-AMP as shown here. For TCS-1061/100 wide dispersion products relocate the jumper from the TRI-AMP PCB header to the centre position (BI-AMP ‘HW’ HORN) as shown below. For TCS-1061/75 narrow di

Inhaltszusammenfassung zur Seite Nr. 8

Quick Start Guide TCS series Turbosound Ltd, Star Road, Partridge Green, West Sussex RH13 8RY t: +44 (0)1403 711447 f: +44 (0)1403 710155 w: www.turbosound.com TCS series Quickstart Guide v1.0 - Page - 8