Inhaltszusammenfassung zur Seite Nr. 1
opus
USER MANUAL
Opus 1
Opus 2
Opus 3
Tri-centre
Tri-surround
Inhaltszusammenfassung zur Seite Nr. 2
opus CONTENTS User Warnings Quick Start Guide About Your Loudspeaker Specifications Quality Assurance WITHIN THIS PACK Certificate of Quality Assurance Systems and Driver Unit Test Reports 4 x White Cotton Gloves Accessories 2
Inhaltszusammenfassung zur Seite Nr. 3
opus USER WARNINGS Please read the following notes carefully. They will help you to install your loudspeakers correctly and safely. Switch off the amplifier and all sources before making connections to your sound system. When you switch on the system or change sources, set the volume control to minimum and turn up the level gradually. The position of your Volume Control is NOT a reliable guide as to the maximum capabilities of your system. Playing the system with extreme settings of volume and
Inhaltszusammenfassung zur Seite Nr. 4
opus QUICK SETUP GUIDE (Opus Series) 4
Inhaltszusammenfassung zur Seite Nr. 5
opus Setting Up the Opus Series Safely unpacking Check you have Loudspeaker preparation Positioning stereo Hi-fi speakers Connecting stereo Hi-fi speakers Positioning AV speakers Connecting AV speakers Setting up AV systems Looking after your loudspeakers 5
Inhaltszusammenfassung zur Seite Nr. 6
SAFELY UNPACKING opus Your Opus speakers are heavy. Take care when removing them from their packaging. Always take care when lifting heavy objects. Lift the speakers out by their sides. Carefully remove each loudspeaker from its packing carton. Be especially careful when removing the polythene bag. The speakers come with the plinth complete and already fitted. The carton top says, “Open other end”. So you, – Open the bottom – Remove polystyrene – Open bag containing speaker – Tape the carton fla
Inhaltszusammenfassung zur Seite Nr. 7
opus Opus 1, 2, 3 Opus Tri-Centre Opus Tri-Surround User Pack User Pack User Pack Accessories: Accessories: Accessories: • 4 Gloves • 2 Gloves • 2 Gloves • Long spike set (4) • Rubber Feet • Rubber Feet • Soft floor spike seats • Bi-wire Links • Foam pad (4) • Bi-wire Links (4) 7 CHECK YOU HAVE
Inhaltszusammenfassung zur Seite Nr. 8
LOUDSPEAKER PREPARATION opus OPUS 1, 2 & 3 SPIKES Your floor standing Opus speakers are delivered with the plinth and spikes already fitted. Levelling/seating the speaker is best achieved by adjusting either of the rear spikes until the speaker is stable without rocking. Release the top knob, on the underside. Turn spike out and down to level. Re-lock top knob. For wood or soft floors 8 metal spike seats and self-adhesive pads are provided for use as required. A set of extra long spikes for dee
Inhaltszusammenfassung zur Seite Nr. 9
5 opus Positioning the speakers. Place the speakers so that you are the same distance from each. The distance between the speakers should be the same as between you and the speakers. 20cm 70cm For best results the speakers should be at best Angle speakers inward by 5º to 30º for a 10 inches (20cm) in front of a wall and at least clearer, more tuneful mid range. 30 inches (70cm) from any corner. If the loudspeakers are placed too close to the walls the bass will increase but may be boomy and indi
Inhaltszusammenfassung zur Seite Nr. 10
CONNECTING HIFI SPEAKERS opus RIGHT LEFT SPEAKER SPEAKER L.SPKR R.SPKR Single wired a single amplifier, tri-link bar is fitted RIGHT LEFT SPEAKER SPEAKER Using separate cables for AMPLIFIER treble, mid and bass units in R.SPKR L.SPKR Tri or Bi-wiring configuration reduces intermodulation effects and improves headroom and clarity. To Bi-wire, you will need to install two lengths of twin core cable between the amplifier and each loudspeaker. Unscrew each terminal a few turns and remove the meta
Inhaltszusammenfassung zur Seite Nr. 11
opus THE HOME THEATRE ENVIRONMENT Front and Effects Channels The front loudspeakers are placed on either side of the television screen, 2 to 3 metres apart. The speakers should be angled slightly so they are aimed towards the listeners. As the rear surround channels are the ‘effects’ channels the reproduced sound should be as room filling as possible. We recommend placing the speakers in a high position, behind the listeners head. If the rear wall is more than 1 metre behind the listening seat,
Inhaltszusammenfassung zur Seite Nr. 12
POSITIONING & CONNECTING AV SPEAKERS opus Subwoofer As the ear is unable to detect the direction from which deep bass originates, this allows you freedom to position a subwoofer according to the level of bass required. Placing the subwoofer near a corner or particularly close to a wall will boost the bass but may impair clarity. The performance of Home Theatre systems can often be enhanced by using a pair of subwoofers. System with Subwoofer Speakers OPUS Centre Loudspeaker A set of self adhesiv
Inhaltszusammenfassung zur Seite Nr. 13
opus Setting Loudspeaker Sizes Many digital AV Processors require you to specify the size of speakers in all channels. These are usually ‘Large or small’. For Opus set the front speakers to ‘large’, set the centre to ‘large’ and the surrounds to small. The subwoofer then will reproduce only the LFE bass signals. If you are not using a subwoofer: Set the front speakers to set the subwoofer option on the processor to ‘Off’ or ‘No’. The front channels will now receive all the system bass. (If you a
Inhaltszusammenfassung zur Seite Nr. 14
SETTING UP AV SYSTEMS opus Delay Settings Many AV processors feature delay settings. The purpose of delay is to enable surround and dialogue information to arrive at the listener’s ears at the same time as the front channels, even when the listen- ing seat is in a non-ideal position. On some processors, this can be achieved by setting the distance from the listening position to each speaker in turn, but other systems allow only a time delay setting. R Re ea ar r D De ella ay y: If the listening
Inhaltszusammenfassung zur Seite Nr. 15
opus Do not open the speakers; there are no user serviceable parts inside. Remove marks from the cabinet and polish it with a soft, slightly damp cloth. Avoid getting any liquid behind the grille. 15 LOOKING AFTER YOUR LOUDSPEAKER
Inhaltszusammenfassung zur Seite Nr. 16
opus TECHNICAL SUPPORT AND INFORMATION For technical support, servicing or product queries and information please contact either your local retailer or the offices below. UK USA ASIA Wharfedale International Ltd. IAG America, Inc. Room 2310 - 2311 Press Building, IAG House, Sovereign Court, 15 Walpole Park South, Shennan Road C, Ermine Business Park, Walpole, Shenzhen, Huntingdon. PE29 6XU MA 02081 China England USA Tel: +86-755-82091200 Tel : +44 (0) 1480 447700 Tel: +1 (0) 508 8503950 Fax: +8
Inhaltszusammenfassung zur Seite Nr. 17
opus ABOUT YOUR LOUDSPEAKER 17
Inhaltszusammenfassung zur Seite Nr. 18
opus ‘THE OPUS SERIES’ The OPUS is a new series of loudspeakers. They are large format loudspeakers, utilising multi- ple drive units. The loudspeaker meets the demands of the most discerning audiophile. These 3 way loudspeakers exhibit exceptional performance characteristics based upon the fol- lowing concepts. Very low distortion across the entire audio band. Low excursion requirement of the cone drivers. High flux magnet systems enabling good dynamic response and impulse control. Broadband di
Inhaltszusammenfassung zur Seite Nr. 19
opus THE DRIVE UNITS THE BASS DRIVERS The bass driver(s) incorporates a new design of cone utilising our own new bi-carbon weave process. Carbon fibre has immense longitudinal strength and is used in many structures where high strength and light weight are key attributes. Carbon fibre can be found liberally used in Formula 1 Racing Cars, Aeroplanes, Boats, Spacecraft and even Golf Clubs. These bundles are woven and impregnated with special bonding resins that are subsequently pressure formed and
Inhaltszusammenfassung zur Seite Nr. 20
opus THE 75mm 3” SOFT DOME MIDRANGE A studio monitor quality large dome mid-range is used to cover the crucial midband frequencies. The key feature of this driver is exceptionally low distortion over its entire working range, typically less than 1% when producing 100dB at 1 metre. It is mounted in a custom matched fascia plate to provide partial horn loading and giving a broad angle of dispersion to its upper crossover point. The fascia plate is constucted from die cast aluminium, designed to pl
