Bedienungsanleitung Boston Acoustics Horizon Series MCS 130 SURROUND

Inhaltszusammenfassung zur Seite Nr. 1

OWNER’S MANUAL / SAFETY INSTRUCTIONS / COMPLIANCE INFORMATION A Boston P.O.P. Product Make it your own...
Horizon MCS 100 Satellite
Horizon MCS 130 Surround
Horizon MCS 130 LCR

Inhaltszusammenfassung zur Seite Nr. 2

Specifi cations MCS 100 MCS 130 MCS 130 Satellite Speaker Surround Speaker LCR Speaker Frequency Response: 120Hz – 20kHz 120Hz – 20kHz 110Hz – 20kHz Recommended Amplifi er 10 – 100 watts 10 – 150 watts 10 – 150 watts Power Range: Sensitivity: 88dB [2.8v at 1m] 88dB [2.8v at 1m] 88dB [2.8v at 1m] Nominal Impedance: 8 ohms 8 ohms 8 ohms Crossover Frequency: 3,000Hz 2,700Hz 2,700Hz ” 1 1 Midrange: 3 (76mm) 3 /2” (89mm) Dual 3 /2” (89mm) treated fi ber with copolymer DCD™ with copolyme

Inhaltszusammenfassung zur Seite Nr. 3

Unpacking the Speaker Carefully unpack the speaker. If there is any sign of damage from transit, report it immediately to your dealer and/or delivery service. Keep the shipping carton and packing materials for future use. MCS 130 MCS 130 MCS 100 LCR Speaker with Surround Speaker Satellite Speaker Removable Feet with Removable Foot with Removable Foot Placement Options The MCS 100 Satellite, MCS 130 Surround and MCS 130 LCR speakers are easily placed on a shelf or wall-mounted. The speakers

Inhaltszusammenfassung zur Seite Nr. 4

Speaker Connections After your speakers are properly placed, you are ready to wire your system. First, turn off all system power. We recommend using 18-gauge (1.0 mm) or larger speaker wire for runs up to 25 feet (8m), and thicker 16-gauge (2.0 mm) or larger for longer 1 runs. Strip ⁄ 2” (12mm) of insulation off the ends of each speaker cable to expose the two conductors and tightly twist the wire strands. See the illustrations below for examples of how to connect the wires to the MCS serie

Inhaltszusammenfassung zur Seite Nr. 5

Operation When using the MCS 100 Satellite, MCS130 Surround or MCS 130 LCR speakers in a Dolby Digital or DTS home theater system, the receiver should be confi gured for “Small” speakers. When using the speakers in a Dolby Pro Logic® home theater system, make sure the receiver’s center channel mode is set to “Normal.” Some Dolby Digital-equipped receivers/processors off er diff erent setup options for each source or surround mode (e.g., CD- stereo, videotape, Dolby Digital, Pro Logic). In each

Inhaltszusammenfassung zur Seite Nr. 6

Limited Warranty Boston Acoustics warrants to the original purchaser of our MCS series speakers that they will be free of defects in materials and workmanship in its mechanical parts for a period of 5 years from the date of purchase. Your responsibilities are to install and use them according to the instructions supplied, to provide safe and secure transporta- tion to an authorized Boston Acoustics service representative, and to present proof of purchase in the form of your sales slip when re

Inhaltszusammenfassung zur Seite Nr. 7

300 Jubilee Drive, Peabody, MA 01960 USA 32 www.bostonacoustics.com © 2007 Boston Acoustics, Inc. Boston, Boston Acoustics, Kortec, BassTrac, and MagnaGuard are registered trademarks and the B/A ellipse symbol are trademarks of Boston Acoustics, Inc. Specifi cations are subject to change without notice. Dolby Digital, and Dolby Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered trademarks of DTS, Inc. 142-003059-0