Inhaltszusammenfassung zur Seite Nr. 1
AV Receiver
DTR-5.9
Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing an Integra AV Receiver. Please read this manual thoroughly before mak- ing connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE TH
Inhaltszusammenfassung zur Seite Nr. 3
Precautions 1. Recording Copyright—Unless it’s for personal use For U.S. models only, recording copyrighted material is illegal with- FCC Information for User out the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- The user changes or modifications not expressly serviceable. If you cannot turn on the unit, contact approved by the party responsible for compliance could the dealer. void the user’s autho
Inhaltszusammenfassung zur Seite Nr. 4
Supplied Accessories Contents Make sure you have the following accessories: Important Safety Instructions...........................2 Supplied Accessories ......................................4 Features .............................................................6 Multiroom Capability ........................................7 Getting to Know the AV Receiver ....................8 Front Panel .............................................................. 8 Remote
Inhaltszusammenfassung zur Seite Nr. 5
Contents—Continued Playing Your AV Components ...................... 48 Controlling a CD Player, CD Recorder, Basic AV Receiver Operation ...............................48 or MD Player .................................................... 106 Controlling an RI Dock ...................................... 107 Common Functions ........................................ 49 Controlling a Cassette Recorder ......................... 108 Setting the Display Brightness ......
Inhaltszusammenfassung zur Seite Nr. 6
Features *1. Amplifier • 7-channel amplifier Manufactured under license from Dolby Laboratories. Dolby, • 90 Watts/Channel @ 8 ohms (FTC) Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. • WRAT-Wide Range Amplifier Technology *2. (5Hz–100kHz bandwidth) • Optimum Gain Volume Circuitry Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 & Processing other U.S. and worldwide p
Inhaltszusammenfassung zur Seite Nr. 7
Multiroom Capability You can use two speaker systems with this AV receiver—a surround-sound speaker system (up to 7.1 channels) in your main listening room, a stereo speaker system in a second room, or Zone 2, as we call it. And, you can select a dif- ferent audio source for each room. Main Room: In your main listening room, you can enjoy up to 7.1-channel playback (see page 14). You can enjoy the various listening modes such as Dolby and DTS (pages 67–75). *While Powered Zone
Inhaltszusammenfassung zur Seite Nr. 8
Getting to Know the AV Receiver Front Panel North American model 1 2 3 4 5 6 789 J KLM N O P Q R S T U V Other models 9 The actual front panel has various logos printed on it. They are not shown here for clarity. The page numbers in parentheses show where you can find the main explanation for each item. A On/Standby button (38) F Music button (67) Sets the AV receiver to On or Standby. Selects the listening modes intended for use with music. B Standby indi
Inhaltszusammenfassung zur Seite Nr. 9
Getting to Know the AV Receiver—Continued J Memory button (55) P Zone 2, Level [ ]/[ ], and Off buttons (96) Used when storing or deleting radio presets. The Zone 2 button is used when setting Zone 2. K Tuning Mode button (53) The Level Up and Down [ ]/[ ] buttons are used Selects the Auto or Manual tuning mode for AM when adjusting the volume level of Zone 2. and FM radio. The Off button is used to turn off Zone 2
Inhaltszusammenfassung zur Seite Nr. 10
Getting to Know the AV Receiver—Continued Rear Panel North American model Only North American model 7 1 2 3 4 56 89 J K L M N AM SIRIUS ANTENNA FM 75 O P Q R ST UV W X Y Z Other models 1 2 3 4 5 6 89 J K L M N AM ANTENNA FM 75 O P Q R ST UV W X Y Z A DIGITAL IN COAXIAL 1 and 2 C COMPONENT VIDEO OUT These coaxial digital audio inputs are for connect- This RCA component video output is for connect- ing components with a coaxial digital audio output, ing a TV or projector w
Inhaltszusammenfassung zur Seite Nr. 11
Getting to Know the AV Receiver—Continued E ETHERNET Q CD IN This port is for connecting the AV receiver to home This analog audio input is for connecting a CD automation equipment and external controllers. Use player’s analog audio output. only shielded Ethernet cables. R TAPE IN/OUT F MONITOR OUT These analog audio input and output jacks are for The S-Video or composite video jack should be connecting a recorder w
Inhaltszusammenfassung zur Seite Nr. 12
Remote Controller Controlling the AV Receiver C Multi CH button (48) Selects the multichannel DVD input. To control the AV receiver, press the [Receiver] Remote Mode button to select Receiver mode. D Arrow [ ]/[ ]/[ ]/[ ] and Enter buttons You can also use the remote controller to control Used to select and adjust settings. your DVD player, CD player, and other components. E Setup button See page 100 for more details. Use
Inhaltszusammenfassung zur Seite Nr. 13
Remote Controller—Continued Installing the Batteries Using the Remote Controller When using the remote controller, point it toward the AV To open the battery compartment, press receiver’s remote control sensor, as shown below. 1 the small lever and remove the cover. Remote control sensor Standby indicator AV receiver 30˚ 30˚ Insert the two supplied batteries (AA/R6) 2 in accordance with the polarity diagram Approx. 16 ft. inside the battery compartment. (5 m) Notes: •
Inhaltszusammenfassung zur Seite Nr. 14
Connecting Your Speakers Enjoying Home Theater Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. You can enjoy DVDs featuring Dolby Digital or DTS. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes. Surround left and right speakers Front left and right speakers These speakers are used for preci
Inhaltszusammenfassung zur Seite Nr. 15
Connecting Your Speakers—Continued Speaker Configuration Using Dipole Speakers For 7.1-channel surround-sound playback, you need You can use dipole speakers for the surround left and seven speakers and a powered subwoofer. right and surround back left and right speakers. Dipole speakers output the same sound in two directions. The following table shows which channels you should use based on the number of speakers you have. Dipole speakers typically have an ar
Inhaltszusammenfassung zur Seite Nr. 16
Connecting Your Speakers—Continued Speaker Connection Precautions Connecting a Powered Subwoofer Read the following before connecting your speakers: Using a suitable cable, connect the AV receiver’s PRE OUT: SUBWOOFER to the input on your powered sub- • North American models: You can connect speakers woofer. If your subwoofer is unpowered and you’re with an impedance of between 6 and 16 ohms. If you using an external amplifier, connect the PRE OUT: SUB- use speakers w
Inhaltszusammenfassung zur Seite Nr. 17
Connecting Your Speakers—Continued Connecting the Speaker Cables Strip about 5/8" (15 5/8" (15 mm) 1 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. Unscrew the terminal. 2 Fully insert the bare wire. 3 Screw the terminal tight. 4 The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the left (L) SURR BACK SPEAKERS ter
Inhaltszusammenfassung zur Seite Nr. 18
Connecting Your Speakers—Continued Bi-amping Speaker Hookup Bi-amping Front Speakers The FRONT L/R and SURR BACK L/R terminal posts Connect the AV receiver’s FRONT R positive (+) can be used with front speakers and surround back 1 terminal to the right speaker’s positive (+) tweeter speakers respectively, or bi-amped to provide separate (high) terminal. And connect the AV receiver’s tweeter and woofer feeds for front speakers, providing FRONT R negative (–) termin
Inhaltszusammenfassung zur Seite Nr. 19
Connecting Antennas This section explains how to connect the supplied indoor Connecting the AM Loop Antenna FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The supplied indoor AM loop antenna is for indoor use only. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Assemble the AM loop antenna, inserting 1 AM antenna push termina
Inhaltszusammenfassung zur Seite Nr. 20
Connecting Antennas—Continued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna If you cannot achieve good reception with the supplied If good reception cannot be achieved using the supplied indoor FM antenna, try a commercially available out- AM loop antenna, an outdoor AM antenna can be used in door FM antenna instead. addition to the loop antenna, as shown. Outdoor antenna Insulated antenna cable AM loop antenna FM 75 AM Notes: ANTENNA • Outdoor FM antenn
