Inhaltszusammenfassung zur Seite Nr. 1
AV SURROUND RECEIVER
AVR-3802
OPERATING INSTRUCTIONS
POWER
ON /
OFF SOURCE
RC-883
REMOTE CONTROL UNIT
TV CD CDR/MD/TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
SURR.
PARA. OSD
SETUP
RETURN
TUNING
A/B
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER AVR-3802 MASTER VOLUME
+ +
FUNCTION
SKIP ENTER
VOLUME LEVEL - SHIFT
REMOTE SURROUND
SIGNAL SKIP MUTING -
SENSOR BACK CH
DIGITAL OUTPUT
TUNER PHONO CD
1 2 3
INPUT SIGNAL
ON / STANDBY AUTO PCM DTS DETECT
CDR/T
Inhaltszusammenfassung zur Seite Nr. 2
2 SAFETY PRECAUTIONS CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG WARNING: TO WIDE SLOT, FULLY INSERT. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ATTENTION POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA CAUTION LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE RISK OF ELECTRIC SHOCK CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’ AU DO NOT OPEN FOND. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- This devic
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions 12. Power-Cord Protection – Power-supply cords should be should be read before the appliance is operated. routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular 2. Retain Instructions – The safety and operating instructions attention to cords at plugs, convenience receptacles, and should be retained for future reference. the point where they exit fro
Inhaltszusammenfassung zur Seite Nr. 4
2 INTRODUCTION Thank you for choosing the DENON Digital Surround A / V receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. TABLE OF CONTENTS
Inhaltszusammenfassung zur Seite Nr. 5
3 CAUTIONS ON HANDLING • Switching the input function when input jacks are not • Whenever the power switch is in the STANDBY state, the connected apparatus is still connected on AC line voltage. A clicking noise may be produced if the input function is switched Please be sure to unplug the cord when you leave home for, when nothing is connected to the input jacks. If this happens, either say, a vacation. turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PR
Inhaltszusammenfassung zur Seite Nr. 6
5 CONNECTIONS •Do not plug in the AC cord until all connections have been • Note that binding pin plug cords together with AC cords or placing completed. them near a power transformer will result in generating hum or • Be sure to connect the left and right channels properly (left with other noise. left, right with right). •Noise or humming may be generated if a connected audio • Insert the plugs securely. Incomplete connections will result in the equipment is used independently without turning t
Inhaltszusammenfassung zur Seite Nr. 7
Connecting video components • To connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video quality. • When making connections, also refer to the operating instructions of the other components. Connecting a TV/DBS tuner TV or DBS tuner TV/DBS AUDIO B VIDEO OUT • Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the R L OUT Monitor TV VIDEO (yellow) TV/DBS IN jack using a 75 Ω /ohms video coaxial pin plug c
Inhaltszusammenfassung zur Seite Nr. 8
Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other. • Precaution when using S-jacks This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from the S-jacks are only output from the S-jack o
Inhaltszusammenfassung zur Seite Nr. 9
Connecting a Video Component Equipped with Color Difference (Component - Y, PR/CR, PB/CB) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video
Inhaltszusammenfassung zur Seite Nr. 10
Connecting the antenna terminals DIRECTION OF BROADCASTING AM LOOP STATION ANTENNA (Supplied) FM ANTENNA 75 Ω /ohms 300 Ω /ohms COAXIAL FEEDER CABLE CABLE FM ANTENNA ADAPTER (Supplied) AM OUTDOOR ANTENNA FM INDOOR GROUND 300 Ω /ohms ANTENNA (Supplied) • An F-type FM antenna cable plug can be connected directly. • If the FM antenna cable’s plug is not of the F-type, connect using the included antenna adapter. AM loop antenna assembly FM antenna adapter assembly 75 Ω /ohms COAXIAL CABLE Connec
Inhaltszusammenfassung zur Seite Nr. 11
Connecting the external input (EXT. IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel decoder, such as a Super Audio DVD player, or a multi-channel SACD player, or other future multi-channel sound format decoder. • When making connections, also refer to the operating instructions of the other components. R L R L RL Decoder with 8- or 6-channel analog output For instructions on playback using the e
Inhaltszusammenfassung zur Seite Nr. 12
Speaker system connections • Connect the speaker terminals with the speakers making sure that like Speaker Impedance polarities are matched (≈ with ≈ , √ with √ ). Mismatching of polarities will • Speakers with an impedance of from 6 to 16 Ω /ohms can be connected for result in weak central sound, unclear orientation of the various instruments, use as front and center speakers. and the sense of direction of the stereo being impaired. • Speakers with an impedance of 6 to 16 Ω /ohms can be connect
Inhaltszusammenfassung zur Seite Nr. 13
Protector circuit • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker output is cu
Inhaltszusammenfassung zur Seite Nr. 14
6 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). @9@8@7 @6@5 @4 @3 @2@1 @0 !9 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER AVR-3802 MASTER VOLUME FUNCTION VOLUME LEVEL REMOTE SIGNAL SURROUND SENSOR BACK CH DIGITAL OUTPUT INPUT SIGNAL ON / STANDBY AUTO PCM DTS DETECT TUNING REC / 6.1 / 7.1 SOURCE PRESET MULTI SURROUND SURROUND A B SPEAKER SURROUND SELECT CH VOL ON / STANDBY PHONES INPUT MODE AUTO PCM DTS ANALOG
Inhaltszusammenfassung zur Seite Nr. 15
Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). Remote control signal transmitter..............................................(29) Power button..........................................(41) POWER ON / OFF SOURCE RC-883 REMOTE CONTROL UNIT TV CD CDR/MD/TAPE RECEIVER DISPLAY/SURR. PARA button .....................................................(51) Mode selector buttons...........................(32) VCR DBS/CABLE VDP DVD System set
Inhaltszusammenfassung zur Seite Nr. 16
7 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-3802’s on-screen display function. These settings are required to set up the listening room’s AV system centered around the AVR-3802. • Use the following buttons to set up the system: SYSTEM SETUP button Press this to display the system setup menu. DISPLAY MENU SURR. OSD PARA.
Inhaltszusammenfassung zur Seite Nr. 17
NOTES: • The on-screen display signals are not output from the color difference (component) video signal (MONITOR OUT) jacks. • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-3802’s S-Video and video monitor output jacks and signals are input to the AVR-3802 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen disp
Inhaltszusammenfassung zur Seite Nr. 18
Before setting up the system Check that all the connections are correct, then turn on the main unit’s power. 1 Display the System Setup Menu. SETUP 2 Setting the power amplifier assignment Make this setting to switch the power amplifier for the surround back channel to Multi. At the System Setup Menu, select “Power Amp TUNING ENTER Assignment” and press the ENTER button 1 SHIFT BAND MODE TUNING Select “Surround Back” to use as the surround back 2 channel, “Multi” to use as multi zone out. TUNING
Inhaltszusammenfassung zur Seite Nr. 19
Switch to the speaker configuration screen. ENTER 2 SHIFT Set whether or not speakers are TUNING connected and, if so, their size 3 parameters. BAND MODE • To select the speaker TUNING Center Sp. • To select the parameter TUNING Front Sp. BAND MODE Subwoofer TUNING Surround Sp. A Surround back Sp. Surround Sp. B Press the ENTER button to finalize the setting. ENTER 4 SHIFT NOTE: • Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity fo
Inhaltszusammenfassung zur Seite Nr. 20
Selecting the surround speakers for the different surround modes This screen is displayed when using both surround speakers A and B. • At this screen preset the surround speakers to be used in the different surround modes. When either “Large” or “Small” has been set for both speakers A and B TUNING on the System Setup Menu (when using both A and B surround speakers), 1 the surround speaker setting screen appears. BAND MODE Select the surround speakers to be used in the different surround modes.
