Inhaltszusammenfassung zur Seite Nr. 1
Kramer Electronics, Ltd.
USER MANUAL
Models:
SV-551, SV-551 ALC
Processor / Switcher SummitView™ Essentials Kit
Inhaltszusammenfassung zur Seite Nr. 2
Contents Contents 1 Introduction 1 2 Getting Started 1 PART I Your SummitView™ System 2 3 Overview 2 3.1 Your SummitView™ Essentials Kit and SV-551 ALC 2 3.2 Quick Start Configuration Setup 3 3.3 8-Step Essentials Kit Quick Installation Guide 4 PART II The SV-551 SummitView™ Processor/Switcher 6 4 Defining the SV-551 SummitView™ Processor/Switcher 6 4.1 DDC Support 9 PART III Detailed Installation Instructions 10 4.2 Defining the RC-63DL Room Controller 10 4.3 Defining the SV-301 a
Inhaltszusammenfassung zur Seite Nr. 3
Contents 9 SummitView™ System Cables 33 10 SummitView™ Cable Termination (Connector-to-Cable) 35 11 Technical Specifications 37 12 Detachable SummitView™ Essentials Kit Check List 39 Figures Figure 1: SV-551 SummitView™ Processor/Switcher 7 Figure 2: SV-551 Processor/Switcher Underside 7 Figure 3: Connecting the SV-301 to the SV-551 15 Figure 4: Connecting the SV-302 to the SV-551 16 Figure 5: Connecting the SV-303/SV-304/SV-305 to the SV-551 17 Figure 6: Closed-back Ceiling Speakers
Inhaltszusammenfassung zur Seite Nr. 4
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now 1 appear in 11 groups that are clearly defined by function. Congratulatio
Inhaltszusammenfassung zur Seite Nr. 5
Overview PART I Your SummitView™ System PART I describes the SummitView™ system and its devices 3 Overview We have designed a complete and simple solution for the integration of media and control in classrooms, training rooms and presentation rooms. SummitView™ is as easy to use as it is to specify and install. The components that make up the SummitView™ system are available as either standalone products or as a Kit with everything included - wall plates, room controllers, amplifier, spe
Inhaltszusammenfassung zur Seite Nr. 6
Overview 1 • SV-301, SV-302, SV-303, SV-304, and SV-305 Wall Plate Devices • RC-62 Series (RC-62, RC-62L), RC-63A Series (RC-63A, RC-63AL), 2 and RC-63D Series (RC-63D, RC-63DL) Room Controllers • SPK-CC688, SPK-CC448, SPK-CC348F Speakers • MT-P9P 9” and MT-P6P 6” center pole sections for the SV-1 Mounting Box which can be attached to any 1.5NFS projector mounting system • SV-1 Pole Mounting Box which can be attached to any 1.5NFS projector mounting system • Additional TP cables (see Se
Inhaltszusammenfassung zur Seite Nr. 7
Overview 3.3 8-Step Essentials Kit Quick Installation Guide This data summarizes how to install your SummitView™ Essentials Kit (similar principles apply if you are installing other SummitView™ configurations). Table 1: Quick Installation Guide for the SummitView™ Standard Kit Description 1 Prepare the openings for the Wall Plates SV-301 and SV-302, and the Room Controller RC-63DL 2 Route the wiring from the proposed location of the SV-551 via: 1 1. Two STP cables to the intend
Inhaltszusammenfassung zur Seite Nr. 8
Overview Description 5 Connect the appropriate wiring—STP, and BCP-2S-25—from the wall plates and the RC-63DL and from the SV-551 to the speakers 6 Connect the cables to the SV-551 7 Install the projector and the screen. Connect the projector to the SV-551 video outputs using the supplied video cables. Connect the RS-232 cable between the SV-551 and the projector. 8 Turn ON the SV-551 and the projector. By choosing the input channels of the SV-551 (from the front panel buttons)
Inhaltszusammenfassung zur Seite Nr. 9
Defining the SV-551 SummitView™ Processor/Switcher PART II The SV-551 SummitView™ Processor/Switcher PART II defines the SV-551 SummitView™ Processor/Switcher 4 Defining the SV-551 SummitView™ Processor/Switcher The Kramer SV-551 SummitView™ Processor/Switcher is designed specifically for the SummitView™ system and is an integral part of it. It fits inside the SV-1 housing. The SV-551 can only be controlled via the default RC-63DL or via one of the other (optional) controllers: RC-62 and
Inhaltszusammenfassung zur Seite Nr. 10
Defining the SV-551 SummitView™ Processor/Switcher Figure 1, Figure 2 and Table 2 define the SV-551 SummitView™ Processor/Switcher. Figure 1: SV-551 SummitView™ Processor/Switcher Figure 2: SV-551 Processor/Switcher Underside Table 2: SV-551 Front, Rear, and Underside Features # Feature Function 1 POWER LED Lights when receiving power to the unit 2 AUTO LED Lights when the unit is configured to automatically identify and select an input according to a set priority 3 LOCK LED Light
Inhaltszusammenfassung zur Seite Nr. 11
Defining the SV-551 SummitView™ Processor/Switcher # Feature Function 4 VIDEO 1 Press to select the video source 1 5 VIDEO 2 Press to select the video source 2 6 PC 1 Press to select the PC 1 source 7 PC 2 Press to select the PC 2 source 8 PC 3 Press to select the PC 3 source 9 PROGRAM Connector Connect to a computer for configuration of the unit (a USB cable is provided with the Controller) 10 ETHERNET Connector Connects to the PC or other Controller through computer networking, for c
Inhaltszusammenfassung zur Seite Nr. 12
Defining the SV-551 SummitView™ Processor/Switcher # Feature Function 30 PC 1 RJ-45 Connector Connect to the PC 1 source via the CAT 5 socket on the rear of the SV-301. Alternatively, connect to a Component video source (via the SV-304 or the SV-305). The relevant DDC connector, when also connected, can be used for IR control of that source 31 PC 2 RJ-45 Connector Connect to the PC 2 source via the CAT 5 socket on the rear of the SV-301. Alternatively, connect to a Component video sou
Inhaltszusammenfassung zur Seite Nr. 13
Defining the SV-551 SummitView™ Processor/Switcher PART III Detailed Installation Instructions PART III covers these topics: installing the Wall Plates, the Ceiling Speakers and the SV-551 We recommend that after deciding where you want to install the screen and the projector, you install in this order, the: 1. Cables and wires. 2. Room Controller and wall plates (see Section 4.2 and Section 4.3). 3. Ceiling speakers (see Section 5). 4.2 Defining the RC-63DL Room Controller This sect
Inhaltszusammenfassung zur Seite Nr. 14
Defining the SV-551 SummitView™ Processor/Switcher 1 Table 3: Defining the RC-63DL # Feature Function # Feature Function 1 SOURCE These 4 configurable backlit 1 FIRMWARE For technical support use only Buttons buttons can set up any UPGRADE Switch supported command 2 K-NET TERM For line termination (see Section 8. 1) Switch 3 PROGRAM (USB) Connect to a computer for unit "SOURCES" is printed on the panel, or it is left blank to affix your own label (see Connector configuration F
Inhaltszusammenfassung zur Seite Nr. 15
Defining the SV-551 SummitView™ Processor/Switcher 4.3 Defining the SV-301 and SV-302 Wall Plates The SV-301 and SV-302 are included as part of the SummitView™ Essentials Kit. Note, that each SummitView™ kit comes with the appropriate set of cables 1 included (see Section 9 ). STP cabling 50' (15.24m) long is provided for these wall 9 plates (see Section ) with the Essentials Kit. When required, longer STP cabling can be used, but we recommend a maximum distance of 100' (30.48m). Exceedin
Inhaltszusammenfassung zur Seite Nr. 16
Defining the SV-551 SummitView™ Processor/Switcher 4.4 SV-301 and SV-302 (U.S.) Table 4 defines the front and rear views of the SV-301 and SV-302. Table 4: Defining the SV-301 and SV-302 (U.S.) SV-301 2 RJ-45 Connectors SV-302 1 RJ-45 Connector # Feature Function # Feature Function 1 ON LED Lights red when receiving power 1 L AUDIO IN Connect to the left (when no signal is detected); RCA Connector analog audio source lights green when receiving a 2 ON LED Lights red when sig
Inhaltszusammenfassung zur Seite Nr. 17
Defining the SV-551 SummitView™ Processor/Switcher 4.5 SV-301 and SV-302 (England and Europe1) The SV-301 and SV-302 are 1 Gang wall plate inserts. The SV-301 has two terminal block connectors at the rear and the SV-302 has one. 2 Table 5: Defining the SV-301 (England and Europe) # Feature Function 1 ON LED Lights red when receiving power (when no signal is detected); lights green when receiving a signal 2 COMPUTER IN Connect to the computer 15-pin HD graphics source Connector 3
Inhaltszusammenfassung zur Seite Nr. 18
Defining the SV-551 SummitView™ Processor/Switcher 4.6 Connecting the Wall Plates The wall plates should be connected to the corresponding inputs on the SV-551 1 using the supplied or optional STP cables (see Section 9). The SV-301 has two RJ-45 CAT 5 connectors (one for DDC and one for PC (Video/Audio/Power (US Table 4 defines, and comes with two STP cables. The SV-302 has one version)), as RJ-45 CAT 5 connector (U.S. version) and comes with one STP cable. To connect the SV-301, as the
Inhaltszusammenfassung zur Seite Nr. 19
Defining the SV-551 SummitView™ Processor/Switcher To connect the SV-302, as the example in Figure 4 illustrates, do the following: 1. On the front of the SV-302, connect the: Composite video source (for example, a DVD player) to the yellow RCA connector, and to the unbalanced stereo audio RCA connectors 1 IR OUT 3.5mm mini plug via an IR Emitter Control cable directly onto the IR sensor window of the controlled device (for example, a DVD player) 2. On the rear of the SV-302, connect
Inhaltszusammenfassung zur Seite Nr. 20
Defining the SV-551 SummitView™ Processor/Switcher RCA connectors, as well as a digital audio (S/PDIF) input on an RCA connector. The input signals are converted via an RJ-45 CAT 5 connector at the rear and transmitted to the SV-551. The SV-304 also has an IR out 3.5mm mini plug connector as an option using a second RJ-45 connector (connection to the SV-551 is similar to the SV-301. The second DDC STP cable is only needed when using the IR OUT connector of the SV-304) • SV-305 (optional)
