Inhaltszusammenfassung zur Seite Nr. 1
01EN_HTR-5860_U-cv.fm Page 1 Wednesday, December 22, 2004 8:01 PM
U
HTR-5860
AV Receiver
© 2005 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77
Inhaltszusammenfassung zur Seite Nr. 2
01EN_HTR-5860_U.book Page i Thursday, December 30, 2004 12:27 PM IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided CAUTION for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. T
Inhaltszusammenfassung zur Seite Nr. 3
01EN_HTR-5860_U.book Page ii Thursday, December 30, 2004 12:27 PM IMPORTANT SAFETY INSTRUCTIONS d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the antenna that are covered by the operating instructions as an or cable system is grounded so as to provide some improper adjustment of other controls may result in protection ag
Inhaltszusammenfassung zur Seite Nr. 4
01EN_HTR-5860_U.book Page iii Thursday, December 30, 2004 12:27 PM CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 14 Do not attempt to modify or fix this unit. Contact manual carefully. Keep it in a safe place for future qualified YAMAHA service personnel when any reference. service is needed. The cabinet should never be opened for any reasons. 2 Install this sound system in a well ventilate
Inhaltszusammenfassung zur Seite Nr. 5
BASIC SOUND FIELD ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERATION PROGRAMS OPERATION INFORMATION 01EN_HTR-5860_U.book Page 1 Thursday, December 30, 2004 12:27 PM CONTENTS INTRODUCTION SOUND FIELD PROGRAMS FEATURES............................................................. 2 SOUND FIELD PROGRAM DESCRIPTIONS 55 GETTING STARTED............................................ 3 For movie/video sources.......................................... 55 For music sources ...........................
Inhaltszusammenfassung zur Seite Nr. 6
01EN_HTR-5860_U.book Page 2 Thursday, December 30, 2004 12:27 PM FEATURES FEATURES Built-in 7-channel power amplifier XM Satellite Radio ◆ Minimum RMS output power ◆ XM Satellite Radio programming (using the “XM (0.06% THD, 20 Hz to 20 kHz, 8 Ω ) Connect and Play digital antenna accessory”, sold Front: 95 W + 95 W separately) Center: 95 W Other features Surround: 95 W + 95 W ◆ YPAO: YAMAHA Parametric Room Acoustic Surround back: 95 W + 95 W Optimizer for automatic speaker setup Sound field
Inhaltszusammenfassung zur Seite Nr. 7
INTRODUCTION 01EN_HTR-5860_U.book Page 3 Thursday, December 30, 2004 12:27 PM GETTING STARTED GETTING STARTED Supplied accessories Please check that you received all of the following parts. Remote control Batteries (4) AM loop antenna Optimizer microphone (AAA, R03, UM-4) CODE SET TRANSMIT SYSTEM POWER POWER STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD DTV/CBL V-AUX MULTI CH IN VCR 1 DVR/VCR2 AMP TV VOL TV CH VOLUME TV MUTE TV INPUT MUTE STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 Indoor FM anten
Inhaltszusammenfassung zur Seite Nr. 8
01EN_HTR-5860_U.book Page 4 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 1 2 3 45 6 7 8 9 0 A (U.S.A. model) VOLUME PURE DIRECT STANDBY /ON PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING/CH MEMORY TUNING MODE SEARCH MODE XM DISPLAY CATEGORY OPTIMIZER EDIT NEXT LEVEL + MAN'L/AUTO FM AUTO/MAN'L MONO MIC PROGRAM INPUT PHONES SPEAKERS VIDEO AUX A B STRAIGHT TONE CONTROL INPUT MODE MULTI CH INPUT EFFECT SILENT CINEMA S VIDEO VIDEO L AUDIO R OPTICAL
Inhaltszusammenfassung zur Seite Nr. 9
INTRODUCTION 01EN_HTR-5860_U.book Page 5 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS B OPTIMIZER MIC jack Use to connect and input audio signals from the supplied microphone for use with the AUTO SETUP function (see page 24). C PHONES (SILENT CINEMA) jack Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the PRE OUT jacks or to the speakers. All Dolby Digital and DTS audio signals are mixed down to the left
Inhaltszusammenfassung zur Seite Nr. 10
01EN_HTR-5860_U.book Page 6 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the 1 Infrared window remote control used to control this unit. To operate other Outputs infrared control signals. Aim this window at the components, see “REMOTE CONTROL FEATURES” on component you want to operate. page 74. 2 CODE SET Use to set up remote control codes (see page 75). 3 Input selector buttons 1 9 Select the input source
Inhaltszusammenfassung zur Seite Nr. 11
INTRODUCTION 01EN_HTR-5860_U.book Page 7 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS B SLEEP Using the remote control Sets the sleep timer. C MULTI CH IN The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote Selects multi-channel input when using an external control sensor on the main unit during operation. decoder (etc.). D AMP Selects the AMP mode. You must select the AMP mode to control the main unit. VOLUME PU
Inhaltszusammenfassung zur Seite Nr. 12
01EN_HTR-5860_U.book Page 8 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS Front panel display 123456 789 0A B C 96 DVR/VCR2 VCR1 V-AUX DTV/CBL DVD MD/CD-R TUNER CD PHONO t 24 VIRTUAL SILENT CINEMA YPAO AUTO TUNED STEREO MEMORY MUTE VOLUME MATRIX DISCRETE SP q DIGITAL STANDARD NIGHT A B HiFi DSP P PTY TY HOLD HOLD PS PS PTY PTY R RT T CT CT E EON ON SLEEP dB q EX q PL ft 96/24 LC R q PL q PL x mS SL SB SR LFE PCM dB D E FH G IJ KN LM 1 Decoder indicators 0 STEREO indicator
Inhaltszusammenfassung zur Seite Nr. 13
INTRODUCTION 01EN_HTR-5860_U.book Page 9 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS K SLEEP indicator Lights up while the sleep timer is on. L 96/24 indicator Lights up when a DTS 96/24 signal is input to this unit. M LFE indicator Lights up when the input signal contains the LFE signal. N Input channel indicators Indicate the channel components of the current digital input signal. 9
Inhaltszusammenfassung zur Seite Nr. 14
01EN_HTR-5860_U.book Page 10 Thursday, December 30, 2004 12:27 PM CONTROLS AND FUNCTIONS Rear panel 12 3 4 58 6 7 COMPONENT VIDEO TUNER PR PB Y DVD 75Ω UNBAL. AM FM GND ANT SYSTEM CONNECTOR ANT DTV/ CBL AUDIO AUDIO VIDEO VIDEO S VIDEO XM MONITOR DIGITAL OUTPUT OUT MD/CD-R CD DVD PRE OUT AC OUTLETS SWITCHED CENTER SINGLE IN DTV/ OPTICAL (PLAY) CBL MD/ CD-R OUT MD/CD-R IN (REC) PRESENCE VCR 1 SUB SURROUND FRONT SURROUND WOOFER BACK SPEAKERS DVD FRONT OUT A DTV/CBL SURROUND IN DVR/ SURROUND VCR
Inhaltszusammenfassung zur Seite Nr. 15
PREPARATION 01EN_HTR-5860_U.book Page 11 Thursday, December 30, 2004 12:27 PM SPEAKER SETUP SPEAKER SETUP Surround speakers (SR and SL) Speaker placement The surround speakers are used for effect and surround sounds. Place these speakers behind your listening * The speaker layout below shows the standard ITU-R position, facing slightly inwards, about 1.8 m (6 ft) above speaker setting. You can use it to enjoy CINEMA DSP and the floor. multi-channel audio sources. Surround back speakers (
Inhaltszusammenfassung zur Seite Nr. 16
01EN_HTR-5860_U.book Page 12 Thursday, December 30, 2004 12:27 PM SPEAKER SETUP Speaker connections 5 Tighten the knob to secure the wire. Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are 3 faulty, no sound will be heard from the speakers, and if the 4 polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION 5 If you will use 4 or 6 ohm speakers, be sure to set this unit’s
Inhaltszusammenfassung zur Seite Nr. 17
PREPARATION 01EN_HTR-5860_U.book Page 13 Thursday, December 30, 2004 12:27 PM SPEAKER SETUP Subwoofer Presence speakers Surround speakers system Right Left Right Left 1 23 4 5 SYSTEM CONNECTOR PRESENCE SPEAKERS A SURROUND B FRONT CENTER SURROUND BACK 6 7 8 9 10 Front speakers Center (B) speaker Right Left Surround back speakers Right Left Front speakers (A) You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously. The surround
Inhaltszusammenfassung zur Seite Nr. 18
01EN_HTR-5860_U.book Page 14 Thursday, December 30, 2004 12:27 PM SPEAKER SETUP ■ FRONT terminals Connect one or two speaker systems (6, 7) to these terminals. If you use only one speaker system, connect it to the FRONT A or B terminals. ■ CENTER terminals Connect a center speaker (8) to these terminals. 2 ■ SURROUND terminals 3 Connect surround speakers (4, 5) to these terminals. 6 8 ■ SURROUND BACK terminals 7 Connect surround back speakers (9, 10) to these terminals. 1 4 If you only
Inhaltszusammenfassung zur Seite Nr. 19
PREPARATION 01EN_HTR-5860_U.book Page 15 Thursday, December 30, 2004 12:27 PM CONNECTIONS CONNECTIONS Dust protection cap Before connecting components Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in CAUTION place. This cap protects the jack from dust. Do not connect this unit or other components to the mains power until all connections between components are co
Inhaltszusammenfassung zur Seite Nr. 20
01EN_HTR-5860_U.book Page 16 Thursday, December 30, 2004 12:27 PM CONNECTIONS Connecting video components ■ Connections for DVD playback Note Be sure to connect your video source components in the same way you connect your video monitor to this unit if V.CONV (see page 70) is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source components to this unit using the VIDEO connections. (Even when V.CONV is set to OFF, S-video
