Bedienungsanleitung Lennox Hearth 1000BASE-T

Inhaltszusammenfassung zur Seite Nr. 1

24-Port
Gigabit Ethernet Switches



User’s Manual
User’s Manual







DOC.100505

Inhaltszusammenfassung zur Seite Nr. 2

A 1. Introduction The 10BASE-T/100BASE-TX/1000BASE-T Switches, which are high-performance Gigabit Ethernet Switches designed for the network core. It provides 24 10BASE-T/100BASE-TX/1000BASE-T ports that can significantly improve the performance of your network’s backbone, and deliver the throughput needed to support a broad range of advanced network applications. With Gigabit Ethernet Switches high performance band-width, it provides the quickest solution to meeting the growing demand

Inhaltszusammenfassung zur Seite Nr. 3

Support Store-and-Forward architecture and performs Forwarding and Filtering Full Wire-Speed Non-Blocking Reception and Transmission Extensive front-panel diagnostic LEDs Rack-mountable kit to fit 19” rack mount shelf C 3. Package Contents Rackmount Kit. User guide CD Power cord. Gigabit Ethernet Switch D 4. Hardware Introduction 4.1 Front Panel The unit front panel provides a simple interface monitoring the Switch. See the chart in section 4.2 for the status of ea

Inhaltszusammenfassung zur Seite Nr. 4

4.2 LED Displays 4.3 Rear Panel The rear panel of the Gigabit Ethernet Switch indicates an AC inlet, which accepts 100-240VAC 50-60Hz power input. 4

Inhaltszusammenfassung zur Seite Nr. 5

Specifications IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, Standard IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow control - Ethernet : 10Mbps(half-duplex), 20Mbps(full-duplex) - Fast Ethernet : 100Mbps(half-duplex), 200Mbps(full-duplex) Data Transfer Rate - Gigabit Ethernet : 2000Mbps(full-duplex) Power, Link/Act, 10/100Mbps – Green LED indicators 1000Mbps – Orange 24 10/100/1000Mbps RJ-45 Auto-MDI / MDI-X Ports Ports -10Base-T : Cat.3, 4, 5 or higer -100Base-TX : Cat.5, 5e o

Inhaltszusammenfassung zur Seite Nr. 6

5. FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio commun