Inhaltszusammenfassung zur Seite Nr. 1
8-Port 10/100 Ethernet Switch
with WebView
User Guide
WIRED
Model No.
SRW208/SRW208G/SRW208L/SRW208P/SRW208MP
Inhaltszusammenfassung zur Seite Nr. 2
WebView Switches Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, a
Inhaltszusammenfassung zur Seite Nr. 3
WebView Switches Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this User Guide? 3 Chapter 2: Getting to Know the Switch 4 Overview 4 SRW208 - Front Panel 4 SRW208G - Front Panel 5 SRW208L - Front Panel 7 SRW208P, SRW208MP - Front Panel 8 The Back Panel 10 Chapter 3: Connecting the Switch 11 Overview 11 Before You Install the Switch... 12 Placement Options 12 Connecting the Switch 15 Chapter 4: Using the Console Interface for Configuration 16 Overview 16 Configuring the HyperTer
Inhaltszusammenfassung zur Seite Nr. 4
WebView Switches VLAN Management Tab - Ports to VLAN 41 VLAN Management Tab - VLAN to Ports 42 VLAN Management Tab - GVRP 43 Statistics Tab - RMON Statistics 43 Statistics Tab - RMON History 45 Statistics Tab - RMON Alarm 47 Statistics Tab - RMON Events 48 Statistics Tab - Port Utilization 49 Statistics Tab - 802.1x Statistics 50 Statistics Tab - GVRP Statistics 50 ACL Tab - IP Based ACL 51 ACL Tab - MAC Based ACL 54 Security Tab - ACL Binding 55 Security Tab - RADIUS 55 Security Tab - TACACS+ 5
Inhaltszusammenfassung zur Seite Nr. 5
WebView Switches Multicast Tab - Bridge Multicast Forward All 77 SNMP Tab - Global Parameters 77 SNMP Tab - Views 78 SNMP Tab - Group Profile 78 SNMP Tab - Group Membership 80 SNMP Tab - Communities 81 SNMP Tab - Notification Filter 82 SNMP Tab - Notification Recipient 83 Admin Tab - User Authentication 84 Admin Tab - Static Address 85 Admin Tab - Dynamic Address 86 Admin Tab - Logging 87 Admin Tab - Port Mirroring 88 Admin Tab - Cable Test 88 Admin Tab - Save Configuration 89 Admin Tab - Firmwa
Inhaltszusammenfassung zur Seite Nr. 6
WebView Switches Appendix G: Regulatory Information 125 Appendix H: Contact Information 131
Inhaltszusammenfassung zur Seite Nr. 7
WebView Switches List of Figures Figure 2-1: Front Panel of the SRW208 4 Figure 2-2: Front Panel of the SRW208G 5 Figure 2-3: Front Panel of the SRW208L 7 Figure 2-4: Front Panel of the SRW208P 8 Figure 2-5: Back Panel of the SRW208 10 Figure 3-1: Typical Network Configuration for the SRW208P 11 Figure 3-2: Attach the Brackets to the Switch 13 Figure 3-3: Mount the Switch in the Rack 13 Figure 3-4: Proper Wall-Mount Orientation (Horizontal) 14 Figure 3-5: Incorrect Wall-Mount Orientation (Vertic
Inhaltszusammenfassung zur Seite Nr. 8
WebView Switches Figure 4-18: SSH Keys Fingerprints 23 Figure 4-19: Username & Password Settings 24 Figure 4-20: Security Settings 24 Figure 4-21: SSL Certificate Generation 24 Figure 4-22: SSL Certificate 25 Figure 4-23: IP Configuration 25 Figure 4-24: IP Address Configuration 26 Figure 4-25: HTTP 26 Figure 4-26: HTTPS Configuration 26 Figure 4-27: Network Configuration 27 Figure 4-28: Ping Test 27 Figure 4-29: TraceRoute Test 27 Figure 4-30: File Management 28 Figure 4-31: Restore System Defa
Inhaltszusammenfassung zur Seite Nr. 9
WebView Switches Figure 5-14: VLAN Management - VLAN to Ports 42 Figure 5-15: VLAN to Ports - Join VLAN 42 Figure 5-16: VLAN Management - GVRP 43 Figure 5-17: Statistics - RMON Statistics 44 Figure 5-18: Statistics - RMON History 45 Figure 5-19: RMON History Table 46 Figure 5-20: Statistics - RMON Alarm 47 Figure 5-21: Statistics - RMON Events 48 Figure 5-22: RMON Events - Events Log 49 Figure 5-23: Statistics - Port Utilization 49 Figure 5-24: Statistics - 802.1x Statistics 50 Figure 5-25: Stat
Inhaltszusammenfassung zur Seite Nr. 10
WebView Switches Figure 5-44: Advanced Mode - New Class Map 65 Figure 5-45: Advanced Mode - New Aggregate Policer 66 Figure 5-46: Spanning Tree - STP Status 67 Figure 5-47: Spanning Tree - Global STP 68 Figure 5-48: Spanning Tree - STP Port Settings 69 Figure 5-49: Spanning Tree - RSTP Port Settings 70 Figure 5-50: Spanning Tree - MSTP Properties 72 Figure 5-51: Spanning Tree - MSTP Instance Settings 72 Figure 5-52: Spanning Tree - MSTP Interface Settings 73 Figure 5-53: Multicast - IGMP Snoopin
Inhaltszusammenfassung zur Seite Nr. 11
WebView Switches Figure 5-74: Admin - Memory Logs 92 Figure 5-75: Admin - Flash Logs 92 Figure C-1: Startup Menu 95 Figure C-1: Auto-Boot Message 95 Figure C-2: Send File 96 Figure C-3: Download 96
Inhaltszusammenfassung zur Seite Nr. 12
WebView Switches Chapter 1: Introduction Welcome This guide covers five product models. SRW208 - 8-port 10/100 Ethernet Switch with WebView. Includes 8 10/100 RJ-45 ports. SRW208G - 8-port 10/100 Ethernet Switch with WebView and Expansion Slots. Includes 8 10/100 RJ-45 ports and 1 10/100/1000 RJ-45 port and 1 MiniGBIC slot. SRW208L - 8-port 10/100 Ethernet Switch with WebView and 100Base-LX Uplink Includes 8 10/100 RJ-45 ports and 1 MiniGBIC slot and 1 100LX Uplink port. SRW208MP - 8-p
Inhaltszusammenfassung zur Seite Nr. 13
WebView Switches There are features that allow you to expand and grow your network of switches. Link aggregation allows multiple high-bandwidth trunks between switches to be setup. This also provides a level of reliability in that the system continues to operate if one of the links break. Spanning Tree (STP), Fast Spanning Tree, and Rapid Spanning Tree (RSTP) allow you to build a mesh of switches increasing the availability of the system. The rich management functionality of the WebView switc
Inhaltszusammenfassung zur Seite Nr. 14
WebView Switches What’s in this User Guide? This user guide covers the steps for setting up and using the Switch. Chapter 1: Introduction This chapter describes the Switch’s applications and this User Guide. Chapter 2: Getting to Know the Switch This chapter describes the physical features of the Switch. Chapter 3: Connecting the Switch This chapter explains how to install and connect the Switch. Chapter 4: Using the Console Interface for Configuration This chapter instructs you on how t
Inhaltszusammenfassung zur Seite Nr. 15
WebView Switches Chapter 2: Getting to Know the Switch Overview The Switches differ in number and types of LEDs and ports. The front panel of each Switch is displayed on one of the following pages. The back panel is the same on all five models. SRW208 - Front Panel The Switch's LEDs and ports are located on the front panel. Figure 2-1: Front Panel of the SRW208 LEDs System Green. The SYSTEM LED lights up to indicate that the Switch is powered on. Link/Act Green. The LINK/ACT LED lights up to in
Inhaltszusammenfassung zur Seite Nr. 16
WebView Switches Ports 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10Mbps or 100Mbps. They can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10Mbps or 100Mbps), and adjust its speed and duplex accordingly. Console The Console port is where you can connect a serial cable to a PC’s serial por
Inhaltszusammenfassung zur Seite Nr. 17
WebView Switches Ports 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10Mbps or 100Mbps. They can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10Mbps or 100Mbps), and adjust its speed and duplex accordingly. G1 The Gigabit Ethernet port supports network speeds of 10Mbps, 100Mbps, and 1000Mbps
Inhaltszusammenfassung zur Seite Nr. 18
WebView Switches SRW208L - Front Panel The Switch's LEDs and ports are located on the front panel. Figure 2-3: Front Panel of the SRW208L LEDs System Green. The SYSTEM LED lights up to indicate that the Switch is powered on. Link/Act Green. The LINK/ACT LED lights up to indicate a functional network link through the corresponding port (1 through 8, G1, or 100LX) with an attached device. It flashes to indicate that the Switch is actively sending or receiving data over that port. 100M Orange. Th
Inhaltszusammenfassung zur Seite Nr. 19
WebView Switches G1 The mini-GBIC (gigabit interface converter) port is a connection point for a mini-GBIC expansion module, so the Switch can be uplinked via fiber to another switch. Each MiniGBIC port provides a link to a high-speed network segment or individual workstation at speeds of up to 1000Mbps. Use the Linksys MGBT1, MGBSX1, or MGBLH1 mini-GBIC modules with the Switch. The MGBSX1 and the MGBLH1 require fiber cabling with LC connectors, while the MGBT1 requires a Category 5e Ethern
Inhaltszusammenfassung zur Seite Nr. 20
WebView Switches Gigabit Orange. The Gigabit LED lights up to indicate a Gigabit connection on the corresponding RJ-45 port (G1 through G2). Ports 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10Mbps or 100Mbps. They can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10Mbps or 100Mbps), and a
