Inhaltszusammenfassung zur Seite Nr. 1
VES-1616/24FA-5x Series
VDSL Switch
Support Notes
Version1.0
Apr. 2008
Inhaltszusammenfassung zur Seite Nr. 2
ZyXEL VES-1616/24FA-5x Series Support Notes Switch Management and Maintenance ------------------------------------------------------ 3 Firmware Upgrade --------------------------------------------------------------------------- 3 Using the Web Configurator --------------------------------------------------------------- 3 Using the Console Port: -------------------------------------------------------------------- 3 Using FTP: -----------------------------------------------------------------
Inhaltszusammenfassung zur Seite Nr. 3
ZyXEL VES-1616/24FA-5x Series Support Notes Operation Mode ---------------------------------------------------------------------------- 69 Scenario of MVR --------------------------------------------------------------------------- 69 Triple play Application -------------------------------------------------------------------------- 77 Configure VES-1616FA-54 -------------------------------------------------------------- 77 Configure P-870H-51 ------------------------------------------------
Inhaltszusammenfassung zur Seite Nr. 4
ZyXEL VES-1616/24FA-5x Series Support Notes Switch Management and Maintenance Firmware Upgrade Using the Web Configurator 1. Download (and unzipped) the correct model firmware to your computer. 2. Click Management > Maintenance in the navigator panel to display the following screen. 3. Click the “Click Here” link for Firmware Upgrade to display the following screen. 4. In the File Path field, click Browse to locate the firmware file. 5. Click Upgrade to start the firmware
Inhaltszusammenfassung zur Seite Nr. 5
ZyXEL VES-1616/24FA-5x Series Support Notes 1. Download (and unzipped) the correct model firmware to your computer. 2. Connect to the console port and launch a Terminal Emulation software 3. Restart the switch to enter the debug mode via the terminal. 4. Enter “ATUR”. 5. Use the X-modem protocol to transfer (Send File) the firmware. 6. Enter “ATGO” to restart the switch after the file transfer is complete and the firmware upgrade process is done. Using FTP: 1. Download (and unzipped
Inhaltszusammenfassung zur Seite Nr. 6
ZyXEL VES-1616/24FA-5x Series Support Notes 2. Click the “Click Here” link for Restore Configuration to display the following screen. 3. In the File Path field, click Browse to locate the firmware file. 4. Click Restore to start restoring configuration. Using the Console Port: 1. Connect to the console port and launch a Terminal Emulation software. 2. Restart the switch to enter the debug mode via the terminal. 3. Enter “ATLC” 4. Use X-modem protocol to transfer (Send File) the
Inhaltszusammenfassung zur Seite Nr. 7
ZyXEL VES-1616/24FA-5x Series Support Notes Backing Up a Configuration File Using the Web Configurator: 1. Click Management > Maintenance in the navigator panel to display the following screen. 2. Click the “Click Here” link for Backup Configuration to display the following screen. 3. Click Backup to display the File Download dialog. Then, click Save to back up the configuration text file to a location you specify on your computer. Using the Console Port: 1. Connect to the
Inhaltszusammenfassung zur Seite Nr. 8
ZyXEL VES-1616/24FA-5x Series Support Notes 5. Enter “ATGO” to restart the switch after file transfer and the configuration backup processes are complete. . Using FTP: 1. Download (and unzipped) the correct model firmware to your computer. 2. Launch the FTP client on your PC to log into the switch. (From the command prompt, type “ftp ” 3. Press [ENTER] when prompted for a user name 4. Enter the administrator login password to access the switch and display FTP prompt. 5.
Inhaltszusammenfassung zur Seite Nr. 9
ZyXEL VES-1616/24FA-5x Series Support Notes 4. Click OK. 5. Click OK again to start the configuration reset process. 6. Please note that the IP address of the switch is now 192.168.1.1. Using the Console Port: 1. Connect to the console port and open the Terminal Emulation Software. 2. Enter the administrator login password to log into the CLI. Enter “erase run” to load the factory default configuration. General Networking DHCP Relay Option 82 Application ISP may want to limit the
Inhaltszusammenfassung zur Seite Nr. 10
ZyXEL VES-1616/24FA-5x Series Support Notes Network Port 1 DHCP Server 192.168.1.99 DHCP Client Setting up a DHCP Relay Option 82 Environment In this example, we will show you how to configure DHCP relay settings to allow a computer to obtain a specific IP address from a DHCP server based on the VDSL port, VLAN ID and the Option82 string. In this network environment, we will use a VES-1616FA-5x series with a computer connected to a CPE to the first VDSL port. The Option82 stri
Inhaltszusammenfassung zur Seite Nr. 11
ZyXEL VES-1616/24FA-5x Series Support Notes st Next connect a computer to the Ethernet port of the CPE to the 1 VDSL port. Refer to the previous application for more information. 2. IP Commander setup Launch IP Commander and right-click IP Commander and click Connect New Server. All contents copyright 2008 ZyXEL Communications Corporation. 10
Inhaltszusammenfassung zur Seite Nr. 12
ZyXEL VES-1616/24FA-5x Series Support Notes Enter the IP address or domain name for the DHCP server and click OK. For this example, we enter 192.168.1.99 for the IP address. All contents copyright 2008 ZyXEL Communications Corporation. 11
Inhaltszusammenfassung zur Seite Nr. 13
ZyXEL VES-1616/24FA-5x Series Support Notes Enter the user name and password. The default user name is “administrator” and password is “incognito”. All contents copyright 2008 ZyXEL Communications Corporation. 12
Inhaltszusammenfassung zur Seite Nr. 14
ZyXEL VES-1616/24FA-5x Series Support Notes A screen displays. Make sure that the status of your DHCP is online. On the top menu, click Wizard > Rule Wizard. All contents copyright 2008 ZyXEL Communications Corporation. 13
Inhaltszusammenfassung zur Seite Nr. 15
ZyXEL VES-1616/24FA-5x Series Support Notes Enter a name and description for the new rule. All contents copyright 2008 ZyXEL Communications Corporation. 14
Inhaltszusammenfassung zur Seite Nr. 16
ZyXEL VES-1616/24FA-5x Series Support Notes Specify one or a range of IP addresses for this rule. In this example, we configure an IP pool from 192.168.1.201 to 192.168.1.203. All contents copyright 2008 ZyXEL Communications Corporation. 15
Inhaltszusammenfassung zur Seite Nr. 17
ZyXEL VES-1616/24FA-5x Series Support Notes Next select DHCP Option in the Keywords field. All contents copyright 2008 ZyXEL Communications Corporation. 16
Inhaltszusammenfassung zur Seite Nr. 18
ZyXEL VES-1616/24FA-5x Series Support Notes An Add DHCP Option Rule screen displays. Select Option 82 Relay Agent Information, set sub-option 1and use binary data. For port 1, VLAN 1 with option82 string of “VES-1616FA-54”, enter “0019000147532d33303132” as the key value and click OK. Note that the first two bytes define the port number, the second two bytes is the VLAN ID and the rest of the bytes are the Option 82 string. All contents copyright 2008 ZyXEL Communications Corporatio
Inhaltszusammenfassung zur Seite Nr. 19
ZyXEL VES-1616/24FA-5x Series Support Notes After setting the fields, you should see the following screen. All contents copyright 2008 ZyXEL Communications Corporation. 18
Inhaltszusammenfassung zur Seite Nr. 20
ZyXEL VES-1616/24FA-5x Series Support Notes Click Next in the screen that displays. All contents copyright 2008 ZyXEL Communications Corporation. 19
