Inhaltszusammenfassung zur Seite Nr. 1
WDSS 5315
WDSS 5315+1
Series Owner’s Manual
OWNER’S MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Name Tag............................................................... 9 Welcome ....................................................................... 4 Insert 0 ................................................................... 9 Terminology Used in this Manual ............................. 5 Manual Conventions ................................................ 5 Setting up Voice Mail ................................................. 20 Product Overview .................
Inhaltszusammenfassung zur Seite Nr. 3
Customizing Your Phone .......................................... 28 Using Conference and Transfer ............................... 37 Selecting a Ring Tone (Handset only).................... 28 Conferencing ......................................................... 37 Activating AutoTalk (Handset only) ........................ 29 Transferring a Call ................................................. 37 Activating Any Key Answer (Handset only) ............ 29 Answering a Transferred Call ..........
Inhaltszusammenfassung zur Seite Nr. 4
Precautions! .............................................................. 49 Rechargeable Nickel-Metal-Hydride Battery Warning ... 49 Index ........................................................................... 50 One Year Limited Warranty ....................................... 54 3
Inhaltszusammenfassung zur Seite Nr. 5
Welcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. 4
Inhaltszusammenfassung zur Seite Nr. 6
Terminology Used in this Manual The handset is not in use. If the handset is on the cradle or [ /flash] or [ ] on the handset is not pressed, no Standby line has been activated. No dial tone is present. Caller ID is available from your Telephone provider and is offered to users on a subscription basis. With this CID service and a display on your cordless phone, you will be able to see the incoming caller information such as name and phone number. Caller ID with Call Waiting is available by
Inhaltszusammenfassung zur Seite Nr. 7
Product Overview Features: • 5.8GHz Wide Band Digital Technology * Caller ID, Name Tag, Distinctive Ring features require Expandable System subscription to the Caller Display service from your network supplier. A fee normally applies for this. • Expands up to 8 Handsets The Caller ID on Call Waiting service is currently • Caller ID* unavailable in New Zealand. • Caller ID on Call Waiting • Name Tag (Pop ID) • Personal (Distinctive) Ring • Store 30 Caller ID Numbers • Advanced Phon
Inhaltszusammenfassung zur Seite Nr. 8
Parts of the Phone The following illustrations show you all of the different parts of your phone. Handset . Headset Jack Cover 2. Belt clip Hole 3. Speakerphone Speaker and Ringer 5 4. Handset Battery Compartment 5. New Message LED 6 1 6. Handset Earpiece 7. LCD Display 2 8. [menu/clear] key 7 9. [ ] key (up) 14 3 0. [ /flash] key (talk/flash) 8 15 . [ ] key (phonebook/left) 9 16 2. [ /tone] key 10 17 * 3. [hold/int’com/xfer] key 11 18 4. [redial/pause] key 5. [select/ ] key (select/mes
Inhaltszusammenfassung zur Seite Nr. 9
Base 23 242526 27 28 23. Base charging contacts 27. TEL LINE Jack 24. in use LED 28. DC IN 9V Jack 25. [find hs] key (find handset) 26. charge LED 8
Inhaltszusammenfassung zur Seite Nr. 10
Using the Interface Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description The battery icon indicates the handset battery status: Standby/Talk full, medium, low, and empty. The ringer off icon indicates that the ringer is turned off. Standby The mute icon appears while the handset microphone is Talk muted. The boost icon appears when the Clarity Boost feature is Talk activated. The
Inhaltszusammenfassung zur Seite Nr. 11
The Standby Screen When the phone is in standby, the handset display shows the following items: Ringer off icon (when the ringer is off) / battery icon Handset ID Number of new Caller ID calls received Up Up Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used View the View the View the View the features at the touch of a button. By moving this key to
Inhaltszusammenfassung zur Seite Nr. 12
Entering Text from Your Handset You can use the number keypad on your handset to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, then the number on the key. If two letters in a row use the same number key,
Inhaltszusammenfassung zur Seite Nr. 13
Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch). • The base and handset should be kept away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting. • For better reception, place the base as high as possible. • The base should be place
Inhaltszusammenfassung zur Seite Nr. 14
Wall Mounting the Base This phone can be mounted on any standard wall plate. ) Snap the wall mount adapter into the notches on the base top. 2) Plug the AC adapter into the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 240V AC wall outlet. 5) Plug the telephone cord into the TEL LINE jack. 6) Plug the telephone cord into the telephone outlet. 7) Align the mounting slots on the base with the mounting posts on the wa
Inhaltszusammenfassung zur Seite Nr. 15
Direct Wall Mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within .5m of a working phone jack to avoid excessive wire lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #0 screws wi
Inhaltszusammenfassung zur Seite Nr. 16
Installing the Battery Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install the handset battery. ) Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery cable into the battery jack. Be sure to match the red and black wires to the label near the jack. The cable should snap into place. Gently pull on the battery cable. If the batt
Inhaltszusammenfassung zur Seite Nr. 17
Connecting the Base and Charging the Handset ) Connect the AC adapter to the DC IN 9V jack. CAUTION: To avoid risk of fire and shock, only use the Uniden AAD-04S AC adapter. 2) Connect the AC adapter to a standard 240V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch. 3) Place the handset in the base with the LCD screen facing forward. T To o A AC C outlet outlet 4) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adap
Inhaltszusammenfassung zur Seite Nr. 18
Connecting to the Phone Line Once the battery pack is fully charged, connect the telephone cord to the TEL LINE jack and to a telephone jack. High Speed Internet If your phone line has High Speed Internet please ensure you are using and approved line filter before connecting the telephone cord. T To o telephone telephone outlet outlet T To o TEL LINE TEL LINE T Te elephone cord lephone cord (supplied) (supplied) Testing the Connection Try making a call. If your call does not connect or you c
Inhaltszusammenfassung zur Seite Nr. 19
Basic Setup Activating Personal (Distinctive) Ring You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you’ve assigned a personal ringer to that number, the phone uses it so you know who is calling. To turn the personal ring on or off, follow these steps: ) Press [menu/clear]. Select the HANDSET SETUP menu, and then the PERSONAL RING submenu. 2) Move the cursor to select ON
Inhaltszusammenfassung zur Seite Nr. 20
Name Tag Name Tagging works with the caller display number from Caller ID. You will need to subscribe to the Caller ID feature with your phone company for Name Tagging to work. When the phone rings, the received caller display number is compared to numbers stored in the phonebook. If there is a match then any name stored with the phonebook number will be displayed. To change the Name Tagging setting, follow the steps listed below. ) Press [menu/clear]. Select the GLOBAL SETUP menu, and the
