Bedienungsanleitung Winegard RP-SK73

Inhaltszusammenfassung zur Seite Nr. 1

Automatic Multi-Satellite TV Antenna
Replacement LNB Instructions
for Models RP-SK01, RP-SK05, RP-SK09, and RP-SK73
For help, email help@winegard.com or call 1-800-788-4417
www.winegard.com/mobile
2452261

Inhaltszusammenfassung zur Seite Nr. 2

3. Carefully slide the LNB out from the feed arm. Disconnect the four Raising the Antenna 7 coax cables from the LNB using a /16” wrench. 1. Press and hold “POWER” for two seconds to turn on the interface box. Wait until the interface box finishes “connecting to antenna.” The 4. Connect the four coax cables running through the feed arm to the ® TRAV’LER antenna may enter the search routine after ten seconds. replacement LNB. The coax cables can be connected in any order. Pay attention to t

Inhaltszusammenfassung zur Seite Nr. 3

Model RP-SK73 Shaw Direct Replacement LNB 1. Remove and set aside the four nuts and bolts holding the LNB guard to the feed arm. Then, remove the LNB guard from the feed arm. 2. Remove and set aside the screw holding the LNB to the feed arm. 3. Disconnect the four coax cables from the 7 LNB using a /16” wrench, and carefully remove the LNB from the feed arm. Screw holding LNB to feed arm 4. Connect the four cables running through the feed arm to the four Bolts holding LNB ports on the re