Inhaltszusammenfassung zur Seite Nr. 1
Multimedia Receiver
BAND AS DISP CLOSE
VM9512
Installation and Operation Manual
ANGLE / TILT PICTURE
Press Audio Enter
VM9512
Watts Peak
Watts en Crête
®
DIV
video
Vatios el Máximo
60W x 4
240
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9512 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation .............................................
Inhaltszusammenfassung zur Seite Nr. 4
ii
Inhaltszusammenfassung zur Seite Nr. 5
VM9512 PREPARATION Congratulations on your purchase of the Jensen VM9512 • USB - Supports Hard Drives and Flash Memory Mobile Multimedia Receiver. Drives • LinkDirect 8-pin DIN for iPod It’s a good idea to read all of the instructions before beginning • 3.5mm Audio Only Input the installation. We recommend having your Jensen VM9512 • RCA Audio /Video Input installed by a reputable installation shop. Chassis Features • 1.0 DIN (Import/ISO-DIN Mountable) DVD • Motorized/Swivel Flip-Out/Flip-Up
Inhaltszusammenfassung zur Seite Nr. 6
VM9512 Optional Equipment Tools and Supplies WARNING! Only connect the unit to a12-volt power • NAV101 You will need these tools and supplies to install your supply with proper grounding. The VM9512 is "navigation ready." Before accessing VM9512: any navigation features, you must purchase and install • Torx type, flat-head and Philips screwdrivers the NAV101 module. All installation and operating • Wire cutters and strippers WARNING! Never install this unit where operation and instructions
Inhaltszusammenfassung zur Seite Nr. 7
VM9512 WIRING DIAGRAM MediaLink See the MediaLink and Satellite Connections diagram for more information Bus * about connecting a satellite receiver and an iPod (through the MediaLink). SAT Radio WHITE * Satellite BLUE Receiver SAT L Connections SUB.W RED RED External Power Amplifier SAT R FRONT R WHITE YELLOW YELLOW FRONT L RED WHITE WHITE REAR R WHITE RED RED REAR L *MediaLink GRAY YELLOW YELLOW CENTER External AV System WHITE WHITE RED RED Antenna Jack YELLOW Rear Video 1 VIDEO OUT 1 NAV101 I
Inhaltszusammenfassung zur Seite Nr. 8
* ** VM9512 MEDIALINK AND SATELLITE CONNECTIONS SAT Radio SAT L SAT R *SAT Cable Kit: JXMC or XMDJEN100 (sold separately) MediaLink **XM or Sirius satellite tuner (sold separately) 3.5mm - Audio VIDEO LEFT RIGHT iPod Video iPod iPod Mini iPod Nano jLink iPod Cable (Included) 4 To Head Unit
Inhaltszusammenfassung zur Seite Nr. 9
BAND AS DISP OPEN Press Audio Enter VM9512 BAND AS DISP OPEN Press Audio Enter VM9512 BAND A OPEN S DISP Press Audio Enter VM9512 VM9512 INSTALLATION Pre-installation FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 4 5 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. PREPARE RADIO 1 Wiring Complete wiring as illustrated in the wiri
Inhaltszusammenfassung zur Seite Nr. 10
VM9512 ANTI-THEFT FEATURE The VM9512 is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. The default user password is 012345 (6 digits). To change the anti-theft and RATINGS protection password, perform the following steps: 1. Press the SETUP button (31) on the remote control or touch the button on the screen to enter the “SETUP” menu. 2. Touch RATING to view the “RATING” sub-menu. The small "lock" icon will be “unlocked”. 3. Enter a new
Inhaltszusammenfassung zur Seite Nr. 11
VM9512 CONTROLS AND INDICATORS Button Operation 7 3 2 1 4 1. OPEN/CLOSE Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. DISP With the TFT monitor open, press to cycle through OPEN BAND AS DISP information available on the TFT screen. With the TFT monitor closed, press and hold to view the 16 Enter Press Audio clock. In DVD Mode, press to view the top and bottom information 15 VM9512 bars. Press again to turn “
Inhaltszusammenfassung zur Seite Nr. 12
VM9512 CONTROLS AND INDICATORS 13.Pause/Play/Enter 7 3 2 1 4 Press to pause or resume playback or to confirm current selection. 14. (right joystick) DVD/Disc Mode: Press once to enter the next chapter or track. Multimedia Receiver BAND AS DISP CLOSE TUNER Mode: Press once to auto-search the next available radio station. MENU Mode: Press once to move the cursor to the right. 15. (up joystick) DVD/Disc Mode: Press once for fast forward/fast reverse. TUNER Mode: Press to go up one frequency ste
Inhaltszusammenfassung zur Seite Nr. 13
VM9512 REMOTE CONTROL The VM9512 Remote controls both the front and rear zones. 30 To switch from front to rear zone, move the F/R switch (32) 8 located on the right side of the controller. 4 35 31 14 16 18 17 19 15 32 2 3 22 1 13 11 9 5 24 12 28 23 20 25 10 21 27 29 26 6 7 33 34 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only. 9
Inhaltszusammenfassung zur Seite Nr. 14
VM9512 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod MENU 1 Enters the main menu of the Turns on/off PBC when play- Displays diagnostics screen Displays iPod menu disc ing VCD TITLE 2 Enters the title menu of the Plays first ten seconds of each Category list in CG mode disc chapter/title MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off
Inhaltszusammenfassung zur Seite Nr. 15
VM9512 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod ||>/BAND 23 Slow Forward/Slow Reverse Play/pause Selects AM/FM Band. Play/pause Selects SAT1, SAT2 or SAT3 X2, X4, X8 band. PIC 24 Displays Brightness/Contrast Displays Brightness/Contrast Displays Brightness/Contrast Displays Brightness/Contrast Displays Brightness/Contrast Displays Brightness/Contrast Controls Controls Controls Controls Controls Controls OPEN/ 25 Opens/closes the TFT monito
Inhaltszusammenfassung zur Seite Nr. 16
VM9512 USING THE TFT MONITOR Open/Close TFT Monitor Monitor Left/Right Angle Adjustment Aspect Ratio Open TFT Monitor To manually adjust the left/right angle of the TFT screen, Press the WIDE button (28) on the remote control or WIDE follow these steps: button (22) on the monitor to adjust the aspect ratio as Press the OPEN button (1) on the front panel or press the follows (only active with video source): 1. Make sure the TFT screen in “Out”. Press the OPEN ( ) button (25) on the remote con
Inhaltszusammenfassung zur Seite Nr. 17
VM9512 Parameter Adjustment Procedure Monitor Movement Mechanism 1. Enter Picture Quality Setting Mode: If an obstruction occurs in the monitor path, the following Press the PIC button (24) on the remote control or press protective measurements can be executed to prevent and hold the WIDE/PICTURE button (22) on the moni- damage to the mechanism or monitor: tor. 2. Select Item to Set: Table 3: Monitor Protective Measures Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”. Self
Inhaltszusammenfassung zur Seite Nr. 18
VM9512 OPERATING INSTRUCTIONS AUX1, AUX2 and CAMERA. The playing mode is displayed Table 4: Audio Adjustments Power On / Off on the TFT and LCD screens. Press the /SRC button (6) on the unit (or the /POWER Function Adjustment Options Auxiliary Devices button (4) on the remote control) to turn the unit on. The EQ User In user mode, you External peripheral devices can be connected to this unit via buttons on the front of the unit light up and the current mode can manually adjust 4 status app
Inhaltszusammenfassung zur Seite Nr. 19
VM9512 • PIP: Touch to view the Rear Zone, current Front Zone, or NAV screen. Use the left/right arrows below the PIP image to change the PIP source. PIP: DISC 01:02 AM (Root) DISC MP3 4/84 00:00:23 E 1 Cherry Poppin Da Q 2 Chris Isaak - Baby R E A 3 Crazy Town - Butt R 4 Phish - Birds Of A P I 5 Phish - Bouncin' R P 6 Phish - Freebird (L 1/2 System Reset To correct a system halt or other [RESET] Button illegal operation, use the tip of a pen to press the reset button (12) located on the fr
Inhaltszusammenfassung zur Seite Nr. 20
VM9512 MULTI-ZONE OPERATION Independent sources can be played simultaneously on the Changing the Rear Zone Source Turning the Rear Screen Off VM9512. For example, a video game console can be seen on To access the SOURCE MENU, touch the TFT screen in the Touch the OFF button (on the SOURCE MENU) to suspend the front screen while DVD video is available to rear top left corner of the screen. operation of the rear screen. Any operation assigned passengers. exclusively to the rear source will be
