Inhaltszusammenfassung zur Seite Nr. 1 
                    
                        Commercial Upright
Vacuum Cleaner
with
®
DUST BAG
680 and 880 Series
Ownerʼs Guide
IMPORTANT
Do not return this product to  
the store. Call 1-800-800-8975*  
Monday - Friday, 8 am to 7:30 
pm CST and 10 am to 6:30 pm  
Saturday or visit our web site,   
www.sanitairevac.com for any  
of the following:
• assembly problems
• replacement of broken or missing 
items
• to order replacement parts and 
accessories
• to view repair parts list
• to locate the nearest Sanitaire 
Warranty Station
*En Mexi
                    
                    Inhaltszusammenfassung zur Seite Nr. 2 
                    
                        IMPORTANT  Index SAFEGUARDS Important Safeguards .................................. 2 When using an electrical appliance, basic precautions should  always be followed, including the following: General Information ..................................... 2 READ ALL INSTRUCTIONS  BEFORE USING THIS VACUUM CLEANER. Assembly ..................................................... 3 WARNING To reduce the risk of fire, electric shock, or injury: Use ...........................................................
                    
                    Inhaltszusammenfassung zur Seite Nr. 3 
                    
                        Grounding Instructions This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for  electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding  conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded  in accordance with all local codes and ordinances. DANGER Improper connection of an equipment-grounding co
                    
                    Inhaltszusammenfassung zur Seite Nr. 4 
                    
                        Attach Lower Handle Attach Lower Cord Hook Raise the dust cup support.  Push the lower handle (largest (680 Series Only) end down) through the tube of the dust cup support and into  Insert the power cord into the lower cord hook (A), as shown.  the handle socket at the back of the cleaner.  Make sure the  Snap the hook into the lower handle. Pull up on the cord to  notches on the lower handle face the rear of the cleaner (Fig.  tighten but leave enough slack near the base so the cord is  1). Ali
                    
                    Inhaltszusammenfassung zur Seite Nr. 5 
                    
                        HOW TO USE HOW TO MAINTAIN The upright vacuum cleaner is designed to be used on The instructions in this booklet serve as a guide to routine  multiple types of carpeting. Do not attempt to use the maintenance.  To avoid unnecessary service calls, check the  upright vacuum cleaner on bare floors, as damage to the bag, belt and brush roll often. floor covering may result. Above the floor cleaning tools are  available (optional). Cleaner Care NOTE:  Turn off the switch and unplug the electrical  cord 
                    
                    Inhaltszusammenfassung zur Seite Nr. 6 
                    
                        5. Remove Brush Roll 7. Replace Cup  Cup  and Swing As the brush roll rotates, it sweeps and combs the carpet nap.   Lid Shut Remove hair and threads from the brush roll so it continues  brushing the carpet nap. When the bristles of the brush roll no  longer touch a straight edge held across the bottom plate, the  brush roll is ineffective because the bristles no longer touch  the carpet nap. To maintain the most effective cleaning, use a  6. Empty new wood brush roll. Replace the brush strips o
                    
                    Inhaltszusammenfassung zur Seite Nr. 7 
                    
                        10. Position end cap with flat sides of center hole over flat 3. Place new belt around brush roll. sides of threaded shaft  (C). 4. Align brush roll pulley with belt guide. 11. Tighten locknut (B). 12. Align holes and secure rubber end cap cover flat side  Belt against end cap (A). Guide When properly assembled, the brush roll should rotate freely  between the two end caps. Check the condition of the belt;  change if necessary. Replace the brush roll, belt, and bottom  plate (see How To Replace A W
                    
                    Inhaltszusammenfassung zur Seite Nr. 8 
                    
                        ® THE SANITAIRE COMMERCIAL LIMITED WARRANTY WHAT THIS WARRANTY COVERS     Your Sanitaire commercial cleaner is warranted to be free  from all defects in material and workmanship in normal use  FOR A PERIOD OF ONE YEAR. The warranty is granted only to the original purchaser of the cleaner. The warranty is subject  to the following provisions. WHAT THIS WARRANTY DOES NOT COVER •  Parts of the cleaner that require replacement under normal use, such as bumpers, bags, bristle strips, belts, light bul