Inhaltszusammenfassung zur Seite Nr. 1
MODEL MC1860
Steam Vacuum
Top Innovations, Inc.
6655 Troost Ave.
Kansas City, MO 64131
Tel: (800) 711-6617
(816) 584-9700
www.steamfast.com
customerservice@topinnovations.com
Printed in China
PRODUCT SERIAL NUMBER
For your convenience, you may write down the serial
by Top Innovations, Inc.
number of your unit (located on the back or bottom of the
unit) here for easy reference when contacting our
Customer Service Department.
Please read all instructions before use.
Mail in your warranty registra
Inhaltszusammenfassung zur Seite Nr. 2
LETTER FROM THE CEO WARRANTY INFORMATION ONE YEAR LIMITED WARRANTY Dear Valued Customer, (If outside USA, additional shipping charges may apply) Top Innovations, Inc. warrants this product to be free from defects in material and Congratulations on purchasing your new MC1860 Steam Vacuum. This exciting workmanship for a period of one (1) year from the date of purchase. This warranty new product combines the natural cleaning ability of steam with a powerful does not cover damage caused by misus
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR FABRIC STEAMER 1. DO NOT fill unit with more than 20 oz. of water. Overfilling may result in burns from spilling water, or possible electrical shock. 2. DO NOT leave your MC1860 Steam Vacuum unattended when plugged in or not in use. Use only for its intended purpose a
Inhaltszusammenfassung zur Seite Nr. 4
TROUBLESHOOTING & CUSTOMER SUPPORT IMPORTANT SAFEGUARDS PROBLEM POSSIBLE CAUSE SOLUTION WARNING: To reduce the risk of electric shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall Unit fails to operate. Unit is not plugged in. Plug into electrical outlet only one way. If the plug does not fit fully in the outlet, outlet. contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. Household Circ
Inhaltszusammenfassung zur Seite Nr. 5
STEAM VACUUM PRODUCT INFORMATION CARE AND STORAGE GUIDELINES The following features and accessories are included with your Steam Vacuum. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing PROPER STORAGE parts, refer to the Customer Support section on page 14 of this manual. Preparing your Steam Vacuum for storage is quick and simple. When you have finished your cleaning tasks, follow the steps listed below. 1. Set Steam-Vac S
Inhaltszusammenfassung zur Seite Nr. 6
STEAM VACUUM PRODUCT INFORMATION USING THE STEAM VACUUM - The Water Filtration Chamber (1) is where dirt and other vacuumed materials are collected. STEAM MODE A minimum of 10 oz. of water should be poured into the Water Filtration Chamber in order 1. When set to steam mode, boiler light (amber) on Steam Indicator will light. This to collect dust and other small particles that are picked up by the unit, preventing them from simply shows that the boiler is on and heating. being released bac
Inhaltszusammenfassung zur Seite Nr. 7
USING THE STEAM VACUUM ASSEMBLING THE STEAM VACUUM OPERATING STEAM VACUUM CONNECTING / DISCONNECTING HOSE 1. Align connector end of Hose with Hose Connection Base as shown (FIGURE 1), NOTE: Be sure that water reservoir and Water Filtration Chamber have and insert it. Press in until two locking tabs on Hose snap through two holes already been filled and that all desired accessories are connected before on sides of Hose Connection Base. following these steps. 2. To remove Hose from Hose Conne
Inhaltszusammenfassung zur Seite Nr. 8
ASSEMBLING THE STEAM VACUUM USING THE STEAM VACUUM FILLING WATER RESERVOIR WITH WATER CONNECTING OTHER ATTACHMENTS 1. Place Steam Vacuum on a flat, level surface. INSERTS 2. Make sure Main Control Switch is set to “Off” (0) position and power cord is unplugged 1. Slide two locks on top of Vacuum Head to “Open” position (FIGURE 3-A). from electrical outlet. 2. Select desired insert, and place it into Vacuum Head as shown (FIGURE 3-B). 3. Press and hold Steam Trigger to ensure that any remaining
