Bedienungsanleitung Audiovox 50-0263x-019 SERIES

Inhaltszusammenfassung zur Seite Nr. 1

FOR
50 - - 001 SERIES 1181310
50 - - 018 SERIES 1181315
50 - - 019 SERIES 1181320
CHEVROLET S -









2
3. 3/8" drill bit
5. Awl or similar tool - 7180 or equiv.)









Jan. 21, 1999

Printed in the U.S.A
-
0027A INSTALLATIO

Inhaltszusammenfassung zur Seite Nr. 2

ITEM SCREW, # 8 X 1 1/2" PWH 4 1 4 2 1 3 1 4 1 5 Jan. 21, 1999 Printed

Inhaltszusammenfassung zur Seite Nr. 3

REMOVE AND DISCARD (2) TWO SCREWS WHICH SECURE BRACKET TO HOUSING. SEPARATE HOUSING TOP FROM HOUSING BOTTOM. 1. r the center of slot on side panel. 2. behind plastic. See Figure 2 . metal brace behind plastic panel. See Fi

Inhaltszusammenfassung zur Seite Nr. 4

5 #8 x 1 1/2" (ite NOTE: Do not overtighten screws. 6 4 FIGURE See Figure 6. tighten (1) one screw previously installed. m 2 pg 2) in holes in bracket and and remove housing and VCP. Install (3) three contacts plastic panel. Mark position of bracket VCP and slide VCP rearward until housing 6. Car

Inhaltszusammenfassung zur Seite Nr. 5

g screws are positioned at bottom of slot. C AUTION: Do not overtighten screws. 7 uring clips. See 8 bottom edge to secure Velcro tape. 9 5 FIGURE See Figure 9. 9. Carefully install housing top and press firmly along FIGURE Figure 8. of vehicle prior to sec firmly. Make sure cont