Inhaltszusammenfassung zur Seite Nr. 1
TABLE OF CONTENTS
HITACHI
i Video Deck
VT-F382A
Owner's Manual
Your Complete Guide
to Videocassette Viewing
and Recording
Using these quality features:
VHS hi-fidelity sound in playback
Automatic tape head cleaning
Up to 8 delayed recording programs
Auto tracking for improved picture in playback
Cable-compatible frequency synthesizer quartz tuner
Illuminated remote control for use with your VCR and TV
All basic playback functions on convenient shuttle control
On-screen programming guide
Multi-ch
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS FOR YOUR SAFETY ......................................................................................................... 4 Read This First ................................................................................................................ 5 IMPORTANT SAFEGUARDS .......................................................................................... 6 Getting Started .................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS Programming the Remote Control ........................................................................... 4! Controlling the TV ....................................................................................................... 42 Advanced Operations (Cable Box Hookups) .................................................................... 43 Hooking Up to a Cable Box .................................................................................. 43 Position Cable Box ...
Inhaltszusammenfassung zur Seite Nr. 4
FOR YOURSAFETY POWER SUPPLY: AC 120V, 60 Hz ONLY. The POWER switch turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit. the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore. it is dangerous to make any kind of contact with any inside part of
Inhaltszusammenfassung zur Seite Nr. 5
Read This First Thank you for buying a Hitachi product. You've chosen the best VCR for you, and we want to help you make the most of your purchase. Please take time to become familiar with this manual and how # is set up. Keep it handy for future reference, too. To guide you, we've concluded: "Must read" sections containing important cautions for your family's safety as well as the basic facts you need to use the VCR. These sections are highlighted like this in the table of contents: Information
Inhaltszusammenfassung zur Seite Nr. 6
i lMPORTANTSAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference. INSTALLATIO
Inhaltszusammenfassung zur Seite Nr. 7
i lMPORTANTSAFEGUARDS 7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 8 Ventilation -- Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not be blocked
Inhaltszusammenfassung zur Seite Nr. 8
i lMPORTANTSAFEGUARDS grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example below: EXAMPLE OF ANTENNA GROUNDING 13 Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into
Inhaltszusammenfassung zur Seite Nr. 9
i lMPORTANTSAFEGUARDS 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b. If liquid has been spilled or objects have fallen into
Inhaltszusammenfassung zur Seite Nr. 10
Getting Started Relax. Using a VCR is very straightforward. This sections explains how to hookup the VCR, quick tour of the controls, set up for first-time operation using on-screen menus, and videocassette tapes. Enjoy getting to know all about your Hitachi VCR. Let's get started. 1 Decide Where to Put Your VCR Be sure your chosen location allows for proper ventilation, stability, and protection from heat and moisture (see Important Safeguards). Place the VCR near your TV but not on top of it.
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started yellow, white and red. They will be labeled something like IN (L and R), AUDIO IN, or VIDEO IN. (If you are not sure, look at the back of your VCR - you will see two sets of these jacks.) ¢= [ N :¢ If you have no jacks like these on your TV, skip this step and proceed to Step 4. TV with Audio and Video Jacks If you do find all three jacks on your TV, you need to purchase a three-line audio/video cable with bell (RCA) connectors, like this: If you find a video jack and only one au
Inhaltszusammenfassung zur Seite Nr. 12
If you have been watching the TV in your home before getting the VCR, you will already have a round wire attached to your TV. Otherwise, look for a cable connection coming in through the wall from outside. (If you find this connection, remember to call your local cable company to start the service.) 1. If still hooked up to your TV, unscrew the round wire from the 75 ohm connector on your television. Otherwise, take the wire that comes in from the wall. 2. Screw this round wire into the IN FROM
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Separate UHF and VHF i &OA_!E_ antenna wires, both 300 ohm flat wire 300 ohm flat UHF and 75 ohm round VHF If you have "rabbit ears" (an antenna on top of your TV), you will need an additional adapter and 75 ohm extension to make your leads reach from the antenna to the VCR. This connection will work only if you have a strong, clear picture on the TV, indicating a strong signal. Connect the antenna to the adapter, and use the cable extension to go from the adapter to the VCR. Use
Inhaltszusammenfassung zur Seite Nr. 14
Getting Started Plug in the TV and VCR power cords to the wall outlet or an appropriate extension cord or surge protector. See Important Safeguards for further precautions (page 6). 6 Install Batteries in the Remote Control The remote control requires two fresh "AA" batteries. On the back of the remote, a plastic cover slides off in the direction shown by the arrow. Remove this cover and install the batteries, matching the plus end of each battery with the plus mark on the remote. J© 4 L.-_ _0 R
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started (controls) Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations. Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too. When you're familiar with these basic controls, proceed to Initial Setup (page 20). We'
Inhaltszusammenfassung zur Seite Nr. 16
Getting Started (controls) CLEAR Used in on-screen programming and indexing. DISPLAY Used in on-screen programming and indexing. VOLUME Increase or decrease the audio volume. MUTE Turns off the audio until you press MUTE again. REC Starts recording on the station the VCR is set to. REW Rewinds the videotape. PLAY Starts playing a loaded cassette. PAUSE Temporarily stops the cassette from recording or playing. Press PAUSE again (or PLAY) to resume. 0 to 9 Number buttons used in on-screen programm
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started (controls) If You Just Want to Watch TV For normal TV viewing, you do not need to disconnect the VCR. When the TV and VCR are already on, press POWER on the remote control. The VCR will shut off, but the TV will stay on. If you are recording on the VCR but want to watch a different channel on the TV, press the VCRiTV button to switch back and forth between the TV channel and the recording channel. VCR Controls POWER Turns VCR power on and off. STOP/EJECT Cancels any videotape act
Inhaltszusammenfassung zur Seite Nr. 18
Getting Started (Controls) You may view all the on-screen instructions in English, French or Spanish. When you first set up your VCR, it will be set to English. Press number 8 or 9 for the other language options. Now, you will do most of your programming and setup by pressing numbers on the remote control which correspond to options presented in this and other on-screen menus. Instructions are easy to follow, and blinking spaces on the screen will show you where your input is needed. When you wa
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started (Initial SetuP) Before you use your VCR to watch or record from your TV, you need to "tell" the VCR whether your TV uses cable or antenna input and let it program itself to receive your TV's channels. It's also a good idea to set the clock so you can do timed recording later. With your TV and VCR hooked up, turn them both on and follow these steps using the remote control. Initial Setup Options Press GUIDE, then press 5 to bring up the Initial Setup screen. The screen shows the d
Inhaltszusammenfassung zur Seite Nr. 20
Getting Started (Initial SetuP) are and . 5 STEREO/MONO Press 5 to control how the audio signal is recorded and sent to the TV. Options are and . 6 SAP Press 6 when you are ready to record a second audio program. Options are and . 7 CABLE BOX SET Press 7 to set up your cable box if you receive all channels through a cable box. 8 AUTO CHANNEL SET Press 8 to automatically program the VCR to receive all the channels that come in on your antenna or cable. 9 AD
