Inhaltszusammenfassung zur Seite Nr. 13
% % EN 13 Set Receivable Channels Tuner TURN ON THE VCR Press POWER. Turn on the TV and select the VCR channel 3 or 4 (or AV 1 mode). ACCESS MAIN MENU SCREEN Press MENU. 2 - + JOG SHATTLE ACCESS TUNER SET SCREEN Move the highlight bar MAIN MENU (arrow) to "TUNER SET" by FUNCTION SET 3 pressing CH5° or TIME =TUNER SET SCAN %Þ, then press OK INITIAL SET or TIME SCAN . HI-FI REC LEVEL CTL PRESS (5,°), THEN (OK) PRESS (MENU) TO END PERFORM AUTO CHANNEL POWER SET Move the highlight bar TUNER SET (
Inhaltszusammenfassung zur Seite Nr. 14
INITIAL SETTINGS (cont.) 14 EN Add Or Delete A Channel Ghost Reduction This VCR is equipped with the Ghost Reduction Tuner. It reduces the ghosts based on a GCR (Ghost Canceller Reference) signal ACCESS MAIN MENU SCREEN sent from a TV station. The ghost reduction mode can be set for Press MENU. each channel independently. 1 NOTES: c Ghosts may not be reduced in the following cases: ACCESS TUNER SET SCREEN – The broadcasting signal does not have a GCR signal. Move the highlight bar (arrow) to "TU
Inhaltszusammenfassung zur Seite Nr. 15
EN 15 This procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer-recording. The Controller is effective for recording shows Cable Box that have been programmed using VCR Plus+ (Z pg. 44) or Express Timer Programming (Z pg. 48). Control Situate And Connect Suggested Location Controller Place the cable box on top of the VCR. Attach the VCR's Controller to the top of the VCR w
Inhaltszusammenfassung zur Seite Nr. 16
% % INITIAL SETTINGS (cont.) 16 EN Set Cable Box Output Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Channel & Cable Box Brand TURN ON CABLE BOX Select a channel other than channel 9 on your cable box. 1 + - TURN ON THE VCR JOG SHATTLE Press POWER. 2 ACCESS MAIN MENU SCREEN Press MENU. 3 POWER ACCESS INITIAL SET SCREEN Press CH5° or TIME SCAN %Þ to move the highlight bar (arrow) to “INITIAL SET”, then press OK or TIME 123 4 SCAN . 2 45 6 ACCESS CABLE BOX SET 7 89 4 0 SCREEN
Inhaltszusammenfassung zur Seite Nr. 17
EN 17 ACCESS CABLE BOX + - BRAND SET SCREEN Press OK. JOG SHATTLE OK MENU 7 ENTER CABLE BOX BRAND Press the appropriate CABLE BOX BRAND SET NUMBER keys to enter the 123 2 1 8 Cable Box Code from the 45 6 CABLE BOX BRAND LIST NUMBER shown below, then press 7 89 OK. PRESS NUMBER KEY (0–9) 4 0 THEN (OK) TO TEST c If the cable box’s PRESS (MENU) TO END channel changes to 9, setting is complete. Press OK and "CABLE BOX CONTROL IS ON" appears on the screen for about 5 1 seconds, then it returns to the
Inhaltszusammenfassung zur Seite Nr. 18
INITIAL SETTINGS (cont.) 18 EN The following procedure is required if you receive satellite channels through a DBS (Direct Broadcast Satellite) Receiver. The Controller allows the VCR to automatically switch the DBS Receiver's channels during timer recording. DBS Receiver NOTES: c The VCR can automatically change the DBS Receiver channels Control using the controller when the VCR has been programmed using Express Timer Programming (Z pg. 48). Suggested Location Because satellite programming does
Inhaltszusammenfassung zur Seite Nr. 19
EN 19 Set DBS Receiver Output Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Channel & DBS Receiver Brand TURN ON DBS RECEIVER Select a channel other than channel 55, 100 or 205 on your DBS receiver. + - 1 JOG SHATTLE TURN ON THE VCR Press POWER. c Set the VCR to the channel (3 or 4 or F-1 or L-1) on 2 which the signals from the DBS receiver are received. ACCESS MAIN MENU SCREEN Press MENU. 3 POWER ACCESS INITIAL SET 123 2 SCREEN 45 6 Press CH5° or TIME SCAN %Þ to move the highli
Inhaltszusammenfassung zur Seite Nr. 20
INITIAL SETTINGS (cont.) 20 EN ACCESS DBS RECEIVER BRAND SET SCREEN Press OK. 7 + - JOG SHATTLE SET DBS RECEIVER BRAND Press the appropriate DBS RECEIVER BRAND SET NUMBER keys to enter the 4 0 8 DBS Receiver Code from the following list, then press OK. PRESS NUMBER KEY (0–9) THEN (OK) TO TEST PRESS (MENU) TO END BRAND CODE JVC (DISH Network) 51 ECHOSTAR (DISH Network) 51 PRIMESTAR 50 SONY (DSS) 41 123 2 RCA (DSS) 40 45 6 NUMBER c After OK is pressed, the program currently received 7 89 through t
Inhaltszusammenfassung zur Seite Nr. 1
W
O
M
E
N
L
U
PAUSE
FF
S
A
/
B
VIDEO CASSETTE RECORDER
HR-S9600U
VCR TV CABLE/DBS AUDIO POWER
MONITOR
TV/VCR ENTER/OSD DISPLAY
123
2
45 6
DBS DAILY(M-F) WEEKLY
7 89
C. RESET AUX
CANCEL TIMER 4
0
START STOP DATE CH
EXPRESS PROGRAMMING
1 PROG PROG SP/EP SKIP SEARCH
CHECK
PLAY
STOP
TV CH +
TV TIME TV
VOL VOL
– SCAN + REW FF
STOP/EJECT PLAY DIGITAL +
-
TBC/NR
S-VHS ET
TV CH –
POWER
JOG/
SHUTTLE
JOG
PAUSE
CH
SHUTTLE
+8 VN LD
S-VIDEO VIDEO (MONO)L—AUDIO—R 4 INSERT A.DUB
SPS EP REVIE
Inhaltszusammenfassung zur Seite Nr. 2
2 EN Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. Failure to heed the following precautions may result in damage to the VCR, remote control or video cassette. CAUTIONS 1. DO NOT place the VCR . . . ... in an environment prone to extreme temperatures or CAUTION humidity. RISK OF ELECTRIC SHOCK ... in direct sunlight. DO NOT OPEN ... in
Inhaltszusammenfassung zur Seite Nr. 3
EN 3 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or SAFETY INSTRUCTIONS covered. • Do not block the openings by placing the product on a bed, Electrical energy can perform many useful functions. But sofa, rug or other similar surface. improper use can result in potential electrical shock or fire • Do not place the product in a bui
Inhaltszusammenfassung zur Seite Nr. 4
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a marked • Do not place this product on an unstable cart, stand, tripod, change in performance and you are unable to restore normal bracket, or table. It may fall, causing serious injury to a child operation by following the detailed procedure in its operating or adult, and serious damage to the product. instructions, do not attempt to service it yourself as opening or
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS EN 5 Recording Features ..................................... 39 Record One Program While Watching Another ..................39 INSTALLING YOUR NEW VCR 6 Display Elapsed Recording Time ........................................39 Connections .................................................. 6 Display Tape Remaining Time ............................................39 Basic Connections ................................................................6 S-VHS (Super VHS), S-VHS ET and VHS ...
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLING YOUR NEW VCR 6 EN Basic Connections CHECK CONTENTS Connections Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (Z pg. 73). Antenna or Cable 1 ANTENNA IN (Antenna or Cable input) SITUATE VCR Coaxial Cable Place the VCR on a stable, horizontal surface. Flat Feeder 2 AC Outlet Matching CONNECT VCR TO TV Transformer AC Power The connection method you use depends on the type of (Not supplied) Cord TV you have. 3 RF Connection c To Connect To A TV With NO AV
Inhaltszusammenfassung zur Seite Nr. 7
EN 7 ANTENNA IN (Antenna or Cable input) Antenna or Cable Coaxial Cable Flat Feeder AUDIO OUT Matching Transformer (not supplied) Back of VCR AC Power Cord IN OUT ANTENNA IN CABLE R BOX AUDIO S VIDEO REMOTE AV VHF/UHF PAUSE COMPULINK IN OUT L (MONO) TV OUT CH3 VIDEO CH4 AC Outlet S VIDEO OUT TV OUT VIDEO S-Video Cable OUT (supplied) Audio/ Video Cable (supplied) S VIDEO IN RF Cable (supplied) 75 ohm terminal TV NOTES: S-VIDEO Connection c To make the most of the Super VHS picture per
Inhaltszusammenfassung zur Seite Nr. 8
INITIAL SETTINGS 8 EN The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for the Plug & Play function. Plug & Play The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. We call this TV channel the “Host Channel” and it is a PBS channel in your area. Auto Clock Set/Auto Tuner Set PLUG & PLAY SETUP ATTENTION Connect the an
Inhaltszusammenfassung zur Seite Nr. 9
% % EN 9 This VCR offers you the choice to view on-screen messages in English, Spanish or French (not including messages superimposed on the TV picture). Select the desired language using this Language procedure. The default setting is "ENGLISH". TURN ON THE VCR Turn on the TV and select the VCR channel 3 or 4 (or AV mode). Press POWER. 1 ACCESS MAIN MENU SCREEN Press MENU. + - JOG 2 SHATTLE ACCESS INITIAL SET SCREEN At the Main Menu screen, MAIN MENU move the highlight bar FUNCTION SET 3 (arrow
Inhaltszusammenfassung zur Seite Nr. 10
% % INITIAL SETTINGS (cont.) 10 EN Perform clock setting only if the clock has not been set correctly by the Plug & Play function or you use a cable box. Access the Clock Set screen to perform the Semi-Auto or Manual clock setting procedure. Each procedure starts from step 5. Clock If you use a cable box, set the clock manually. (Z pg. 12) Turn on the TV and select the VCR channel 3 or 4 (or AV Preparation mode). TURN ON THE VCR Press POWER. 1 ACCESS MAIN MENU + - SCREEN JOG SHATTLE Press MENU.
Inhaltszusammenfassung zur Seite Nr. 11
EN 11 Semi-Auto You can change the Host Channel/D.S.T. /Time Zone setting manually. SET AUTO CLOCK TO ON + - At the Clock Set screen, CLOCK SET JOG press OK or TIME SCAN # SHATTLE TIME DATE YEAR 5 repeatedly to move the 1:00PM 12/24 99 THU highlight bar to "AUTO AUTO CLOCK : ON CLOCK" and press CH 5° HOST CH : AUTO (CATV) D.S.T. : AUTO or TIME SCAN %Þ to set TIME ZONE : AUTO to "ON". PRESS (5,°), THEN (OK) a– To select the Host PRESS (MENU) TO END Channel — go to step 6 b– To select the D.S.T. m
Inhaltszusammenfassung zur Seite Nr. 12
% % % % % INITIAL SETTINGS (cont.) 12 EN Manual SELECT TIME ZONE You can select the time zone automatically or manually. SET TIME Move the highlight bar to "TIME ZONE" by pressing OK 8 or TIME SCAN , then press CH 5° or TIME SCAN %Þ Press CH 5° or TIME CLOCK SET to select "AUTO" or the desired time zone. SCAN %Þ until the desired TIME DATE YEAR 5 time appears, then press – –:– –AM 1/ 1 99 OK or TIME SCAN . AUTO CLOCK : ON AUTO ATLANTIC HOST CH : AUTO (CATV) c Press and hold CH 5° D.S.T.
