Bedienungsanleitung Glen Dimplex Home Appliances Ltd DIH900

Inhaltszusammenfassung zur Seite Nr. 1

•
Designer Island Hood
DIH900
Installation & User’s instructions

Inhaltszusammenfassung zur Seite Nr. 2

   
   

       
   2
 

  

Inhaltszusammenfassung zur Seite Nr. 3

        
       
      3

Inhaltszusammenfassung zur Seite Nr. 4

• Your new Belling Island Hood Dear Customer These instructions are designed to help you know your new cooker hood quickly and to achieve the best possible results. It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the

Inhaltszusammenfassung zur Seite Nr. 5

type. If other types of flue or appliances are fitted, ensure there is adequate ventilation in the room. All installations must comply with local authority requirements for the discharge of exhaust air. • Positioning When installed above a cooking appliance the distance between the surface of the appliance hotplate and the lower grill of the hood must not be less than 65cm (25½”). This appliance is suitable for ceiling heights of approximately 236cm (7’9") and 273cm (9’0") depending on the inst

Inhaltszusammenfassung zur Seite Nr. 6

Note: Depending on the location and the construction of ceiling, it may be necessary to use a more substantial method of fixing, e.g. nuts and bolts, rather than normal self-tapping or wood screws. B) Mount the connector flange F above the cooker hood ventilation kit, using the G screws (Fig. 4). Couple the lower mounting structure C with the cooker hood A using the 6 screws I (Fig. 4). Connect a flexible air discharge tube (not supplied), of 120mm diameter, to the F flange (Fig. 6) Recirculati

Inhaltszusammenfassung zur Seite Nr. 7

1A) LUMINOUS A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III F = AUTOMATIC STOP TIMER - 15 minutes The “Automatic stop timer” allows the hood to continue functioning for 15 minutes at the operating speed set at the time this function is activated. 1B) MECHANICAL A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III G= MOTOR WORKING indicator Good functioning of the hood depends on the regularity with which maintenance operations are carried out, in particular of the anti-grease filte

Inhaltszusammenfassung zur Seite Nr. 8

Do change charcoal filters regularly Don’t leave naked flames under the cooker hood Don’t leave frying pans unattended during use as overheated fat may catch fire Don’t flambé cook under the cooker hood Don’t try to check the filters when the hood is in operation. Don’t touch the lamp after prolonged use of the appliance. • If your cooker hood doesn’t work Check the power supply Is the hood switched on? Has the hood become too hot and switched itself off? If hood is still not working call for se

Inhaltszusammenfassung zur Seite Nr. 9

• Optional extras Please quote the following part number if you require a ducting or tall ceiling kit. Filter DCH900004 Ducting Kit Short CHIM100004 (1m) Ducting Kit Long CHIM100004A (3m) Tall ceiling kit Stainless Steel DIH900002 Tall ceiling kit Aluminium DIH900003 • Calling for Service Please contact your retailer in the first instance. If you experience difficulty contact Belling Appliances (After Sales Division) Remember that you may be charged for the visit (even during the guarante

Inhaltszusammenfassung zur Seite Nr. 10

10

Inhaltszusammenfassung zur Seite Nr. 11

11

Inhaltszusammenfassung zur Seite Nr. 12

Belling Appliances Ltd. Stoney Lane, Prescot, Merseyside L35 2XW PART No. DIH900001/01/02 3LI0ISOMIRABE.1 - 03/05 -