Inhaltszusammenfassung zur Seite Nr. 1
CD-RECEIVER
KDC-V6090R
INSTRUCTION MANUAL
KDC-6090R
KDC-5090R
COMPACT
DIGITAL AUDIO
B64-1873-00 (EN)
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety precautions Playing Other Disc mode...........................................................................22 Safety precautions .......................................................................................3 Fast Forwarding and Reversing Disc Play .................................................23 Handling Compact discs ..............................................................................6 Track Search........................................................
Inhaltszusammenfassung zur Seite Nr. 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury and/or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to locked in place. Otherwise it may fly out of 12V DC power supply. "N". place during collis
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions • The illustrations of the display and the NOTE panel appearing in this manual are examples used to explain more clearly how • If you experience problems during the controls are used. Therefore, what installation, consult your Kenwood dealer. appears on the display in the illustrations • Press the reset button if the CD auto may differ from what appears on the changer is first controlled and operates display on the actual equipment, and some incorrectly. The original operati
Inhaltszusammenfassung zur Seite Nr. 5
Cleaning the Faceplate Terminals The marking of products using lasers If the terminals on the unit or faceplate get (Except for some areas) dirty, wipe them with a dry, soft cloth. CLASS 1 Cleaning the CD Slot LASER PRODUCT As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if The label is attached to the chassis/case and you put them in a dusty CD slot. says that the component uses laser beams that have been classified as Class 1. It means that the unit is
Inhaltszusammenfassung zur Seite Nr. 6
Handling Compact discs Playing a CD that is dirty, scratched Storing CDs Checking New CDs for Burrs or warped can cause the sound to • Do not store CDs in areas exposed to When playing a new CD for the first time, direct sunlight – such as a car seat or check that there are not any burrs stuck to skip and the unit to operate above the fascia panel (dashboard) – or the perimeter of the disc or in the central incorrectly, resulting in worsened other hot places. hole. CDs with burrs stuck on them m
Inhaltszusammenfassung zur Seite Nr. 7
Do Not Load CD Accessories in Slot Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Do not use commercially available CD • Be sure to use round shape CDs only for Labelled Side accessories that can be loaded into the CD this unit and do not use any special shape Do not use the CD with the label sticker slot, such as stabilisers, protective sheets, CDs. Use of special shape CDs may cause stuck on it. or CD cleaning discs, since they can cause the unit to malfunction. Using such a C
Inhaltszusammenfassung zur Seite Nr. 8
General features Power 5 / °
Q SRC / PWR OFF CLK Turning on the power: Press the SRC button. NOTE Turn the power on before carrying out the following procedures. Turning off the power: Hold down the PWR OFF button for one second or more. NOTE ATT/LOUD DISP FM AM/ The status of the Code Security Function (page 28) is displayed Release NF whenever the power is switched on. button 4¢ "CODE ON" : Security Code has been registered KDC-6090R/KDC-5090R "CODE OFF" : Security Code has not been registere
Inhaltszusammenfassung zur Seite Nr. 9
NOTE Attenuator • The mode switches to the next mode from any mode which This function allows you to turn down the volume quickly. cannot be used. • The external disc control mode will differ depending on the unit Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. that is connected. • To enable the selection of External disc control mode 2/AUX When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original mode
Inhaltszusammenfassung zur Seite Nr. 10
General features Theft Deterrent Faceplate The faceplate can be reversed to hide the control panel or detached form the unit, helping to deter theft. Removing the Faceplate: 1 • When the control panel is visible: Press the release button. 2CAUTION • When the control panel has been hidden: Do not set the right side of the faceplate in the faceplate bracket Press the upper side of the faceplate. first, when reattaching the faceplate. Doing so may cause the 2 Holding the centre part of the faceplat
Inhaltszusammenfassung zur Seite Nr. 11
NOTE Whilst the control panel is sliding, only available buttons are 0, ATT, , and SRC. Clock display Changing the Clock Display: Each time you press the CLK button, the display switches between the clock and each mode display. NOTE The clock indicator lights whilst the clock is displayed. TEL Mute Shut down the audio system temporarily whenever an incoming call is received. NOTE The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is rec
Inhaltszusammenfassung zur Seite Nr. 12
General features System Q 2 Press the Q button to enter the speaker setting mode. You can recall the best audio setting preset for different types 3 Press either the 4 or ¢ button to select the type of of the music. speaker. The setting switches as follows. Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") / Switching the Preset Sound Setting: For 5/4 in. speaker ("SP 5/4inch") / Each time you press the Q button, the preset sound setting For the OEM speaker ("SP O.E.M.") switches as foll
Inhaltszusammenfassung zur Seite Nr. 13
Audio control features Audio Control Setting AUD Adjust various parameters of sound quality. 1 Hold down the AUD button for one second or more to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the FM AM adjustment modes. 4¢ NOTE Source tone memory KDC-6090R/KDC-5090R Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass
Inhaltszusammenfassung zur Seite Nr. 14
Audio control features Function of the KDC-6090R Bass Level Non-Fading Level Adjust the bass level. Adjust the Non-fading output level. Display and setting: "Bass" : - 8 – + 8 Display and setting: "NF Level" : - 15 – + 15 NOTE This mode is available only when the non-fading output function is set to on. Middle Level Adjust the middle level. Display and setting: "Middle"/"MID" : - 8 – + 8 Function of the KDC-6090R High-pass Filter Frequency for Front Output Adjust the frequency of the High-
Inhaltszusammenfassung zur Seite Nr. 15
Tuner features Function of the KDC-6090R DISP SRC Low-pass Filter Frequency for Non-Fading Output Adjust the frequency of the Low-pass filter for Non-Fading output. Display and setting: "LPF NF" : 50 Hz / 80 Hz / 120 Hz / Through NOTE This mode is available only when the non-fading output function is set to on. #1-6 AM FM 4¢ KDC-6090R/KDC-5090R Function of the KDC-6090R Band display Frequency Preset station number Phase for Non-Fading Output Adjust the phase for Non-Fading output. Display and se
Inhaltszusammenfassung zur Seite Nr. 16
Tuner features Tuning 1 Select the band/station that you want to have stored. 2 Hold down the button (#1-6) that you want to use for the 1 Press the SRC button repeatedly until the tuner mode is station, for two seconds or more. obtained. "TUNER" is displayed only when the tuner mode is The button number blinks once in the display to indicate that selected. the data has been stored. 2 Press either the FM or AM button to select the band. Recalling a Preset Station: Each time you press the FM butt
Inhaltszusammenfassung zur Seite Nr. 17
RDS features 2WARNING DISP PTY To prevent accidents, drivers should not look at the display whilst driving. #1-6 TI/ AM FM VOL ADJ 4¢ KDC-6090R/KDC-5090R PTY indicator TI indicator NEWS indicator RDS indicator KDC-V6090R PTY indicator TI indicator NEWS indicator RDS indicator — 17 —
Inhaltszusammenfassung zur Seite Nr. 18
RDS features RDS (Radio Data System) Traffic Information Function RDS is a digital information system that lets you receive You can listen to traffic information. If you are listening to signals besides those of regular radio programmes, such as tapes or discs, they will continue playing until a traffic bulletin network information being transmitted from radio stations. is broadcast. When listening to an RDS station (ie, a station with RDS Turning TI function On/Off: capability), the programme s
Inhaltszusammenfassung zur Seite Nr. 19
NOTE Presetting Volume for Traffic Information/News Please see the menu settings (page 34) about switching between Preset the volume level to be used for traffic information and manual scrolling and automatic scrolling. news broadcasts. 1 Tune into the station for which you want to set the volume. 2 Adjust the volume to the desired level. 3 Hold down the VOL ADJ button for two seconds or more. The volume level blinks once in the display to indicate that the data has been stored. Future traffic
Inhaltszusammenfassung zur Seite Nr. 20
RDS features 24. Jazz Music (Jazz) Programme Type (PTY) Function 25. Country Music (Country) Conduct auto seek tuning only on those stations with selected 26. National Music (Nation M) kinds of programmes. 27. Oldies Music (Oldies) 28. Folk Music (Folk M) 1 Press the PTY button. 29. Documentary (Document) "PTY" is displayed, and the Programme Type Selection (PTY) (Speech.....1~9,16~23, 29, Music.....10~15, 24~28) Mode entered. • You can select the type of programme directly by pressing a If you
