Bedienungsanleitung PYLE Audio PLVW1342

Inhaltszusammenfassung zur Seite Nr. 1

Specifications
Screen Size: 13 inch 4:3TFT
System: PAL/NTSC
Display Method: TFT Active matrix system
Power source/Consumption: DC12V+/-20%, 15W
Storage Temperature: -10 ~ +85
Display Method : Color LCD
Monitor dimension: 325x275x30mm
13 TFT LCD COLOR MONITOR
Pixs: 800x600
Weight: 900g
In

Inhaltszusammenfassung zur Seite Nr. 2

Thank you for the purchase of this roof mounting 13inch TFT-LCD REMOTE CONTROL BATTERY monitor .Before operating the unit ,please read this manual thoroughly and keep it for future reference. Back of the remote PREAUTIONS The set is for use in DC12V ,negaive ground vehicles. Battery tank Do not operate the set in ways other than described in this guide .Doing so may damage it and may void your warranty. Battery SAFETY FIRST FOR REAR SEAT USE ONLY .Do not install on dashboard Transparent sli

Inhaltszusammenfassung zur Seite Nr. 3

Pannel WIRING DIAGRAM Read all wiring precautions .If you are not sure of the connections ,contact your 10 authorized dealer. 1.Disconnect the negative(-) lead of the battery before making any power 11 connections. 2.When creating passage holes for the power wires ,use grommets to eliminate any sharp edges created during drilling .This will protect the wire from being 12 nicked and causing a short circuit . 3.When connecting the ground lead ,fasten the ground lead(black) secure