Inhaltszusammenfassung zur Seite Nr. 1
ELECTRONIC CASH REGISTER
SE-S300
(with medium size drawer)
(with small size drawer)
USER'S MANUAL
Eu Di U.K. c
Inhaltszusammenfassung zur Seite Nr. 2
Introduction & Contents Important! Your new cash register has been carefully tested before shipment to ensure proper operation. Safety devices eliminate worries about breakdowns resulting from operator errors or improper handling. In order to ensure years of trouble-free operation, however, the following points should be noted when handling the cash register. Do not locate the cash register where it will be subjected to direct sunlight, high humidity, splashing with water or other liquids, or hi
Inhaltszusammenfassung zur Seite Nr. 3
Welcome to CASIO Cash Register! Congratulations upon your selection of a CASIO Electronic Cash Register, which is designed to provide years of reliable operation. Operation of a CASIO cash register is simple enough to be mastered without special training. Everything you need to know is included in this manual, so keep it on hand for reference. Consult your CASIO dealer if you have any questions about points not specifically covered in this manual. Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-
Inhaltszusammenfassung zur Seite Nr. 4
Introduction & Contents Safety Precautions • To use this product safely and correctly, read this manual thoroughly and operate as instructed. After reading this guide, keep it close at hand for easy reference. Please keep all informations for future reference. • Always observe the warnings and cautions indicated on the product. About the icons In this guide various icons are used to highlight safe operation of this product and to prevent injury to the operator and other personnel and also to pre
Inhaltszusammenfassung zur Seite Nr. 5
Warning! Power plug and AC outlet Use only a proper AC electric outlet (100V~240V) . Use of an outlet with a different voltage from the rating creates the danger of malfunction, fire, and electric shock. Overloading an electric outlet creates the danger of overheating and fire. Make sure the power plug is inserted as far as it will go. Loose plugs create the danger of electric shock, overheating, and fire. • Do not use the register if the plug is damaged. Never connect to a power outlet that is
Inhaltszusammenfassung zur Seite Nr. 6
Introduction & Contents Introduction & Contents ...................................................................................... 2 Getting Started ................................................................................................... 10 1. Load the memory protection batteris and Paper rolls ................................................. 10 2. Install receipt / journal paper. ....................................................................................... 11 3. Plug t
Inhaltszusammenfassung zur Seite Nr. 7
Registering PLUs ............................................................................................................ 34 Preparing and using discounts ............................................................................................ 36 Programming discounts .................................................................................................. 36 Registering discounts ...................................................................................................
Inhaltszusammenfassung zur Seite Nr. 8
Introduction & Contents Programming other descriptors ...................................................................................... 58 Report descriptor .................................................................................................................................. 58 Grand total, special character ............................................................................................................... 59 Report title .............................................
Inhaltszusammenfassung zur Seite Nr. 9
Troubleshooting ................................................................................................. 88 When an error occurs .......................................................................................................... 88 When the * sign appears on the display .............................................................................. 89 When the register does not operate at all ........................................................................... 90 Clearing a
Inhaltszusammenfassung zur Seite Nr. 10
Getting Started This chapter shows how to setup the cash register and get it ready to operate. Please read this chapter even if you have used a cash register before. 1. Load the memory protection batteris and Paper rolls Load the two memory protection batteries 1. Remove the printer 2. Remove the battery cover. compartment cover. battery compartment cover printer cover 3. Note the (+) and (–) markings in the battery compartment. Load a set of two new alkaline batteries so that their positive (+)
Inhaltszusammenfassung zur Seite Nr. 11
2. Install receipt / journal paper. Platen arm Platen Printer Important! Take away the head protection sheet from the printer and close the platen arm. Caution! (in handling the thermal paper) • Never touch the printer head and the platen. • Unpack the thermal paper just before your use. • Avoid heat/direct sunlight. • Avoid dusty and humid places for storage. • Do not scratch the paper. • Do not keep the printed paper under the following circumstances: High humidity and temperature/direct sunli
Inhaltszusammenfassung zur Seite Nr. 12
Getting Started To install journal paper Step 1 Remove the printer cover. Step 7 Step 2 Slide the leading end of Open the platen arm. the paper into the groove on the spindle of the take- up reel and wind it onto the reel two or three turns. Step 3 Step 8 Ensuring the paper is being Replace the paper guide of fed from the bottom of the the take-up reel. roll, lower the roll into the space behind the printer. Step 9 Step 4 Place the take-up reel into Put the leading end of the place behind the pr
Inhaltszusammenfassung zur Seite Nr. 13
3. Plug the cash register into a wall outlet. Be sure to check the sticker (rating plate) on the side of the cash register to make sure that its voltage matches that of the power supply in your area. 4. Insert the mode key marked “PGM” into the mode switch. X REG OFF RF PGM 5. Turn the mode switch to the “PGM” position. X Z P01 REG X2/Z2 OFF RF ~00 PGM RPT T1 T2 T3 T4 TOTAL CHANGE AMOUNT When the display shows “Low battery”, load memory protection batteries (refer to page 10). 6. Set the
Inhaltszusammenfassung zur Seite Nr. 14
PGM Getting Started 8. Tax table programming This cash register is capable of automatically calculating up to four different sales taxes. The sales tax calculations are based on rates, so you must tell the cash register the rates, the type of tax (add-in or add- on). Note that special rounding methods (next page) are also available to meet certain local tax requirements. Important! After you program the tax calculations, you also have to individually specify which departments (page 31) and PLUs
Inhaltszusammenfassung zur Seite Nr. 15
8. Tax table programming (about special rounding) Besides cut off, round off and round up, you can also specify “special rounding” for subtotals and totals or changes. Special rounding converts the right-most digit(s) of an amount to “0” or “5” (or “00”, “25”, “50, “75”) to comply with the requirements of certain areas. Programming special rounding See the list below and select the rounding which you require. Programming procedure 63s6422s 6s PGM D10 D9 D1 :: ~ : a Mode switch Enter the code in
Inhaltszusammenfassung zur Seite Nr. 16
PGM Getting Started 9. Select printouts and watermark on receipt. Turn the mode switch to “PGM”, enter <0>, <1> or <10>, and press the , Example: issue receipt (with no watermark) 2 0hs issue receipt (with watermark) 2 1hs print journal 2 10hs Note ! If you need journal and are sometimes required receipts by customers, select “issue receipt”. After business hours, issue the electronic journal report. 10. For Australian GST 1. Turn mode switch to X mode. 2. Enter 01012001, press .
Inhaltszusammenfassung zur Seite Nr. 17
11. Department unit price programming Maximum 6-digit unit price can be set to the department. Refer to page-32. Tax calculation status can be set to the department. Refer to page-32. 12. PLU unit price programming Maximum 6-digit unit price can be set to the PLU. Refer to page-33. Tax calculation status can be set to the PLU. Refer to page-33. 13. Discount rate programming 0.01 - 99.99% rate can be set to the Discount key. Refer to page-36. Tax calculation status can be set to the Discount key.
Inhaltszusammenfassung zur Seite Nr. 18
Getting Started 15. Advanced operations and Setups Using clerk functions ..................................... 46 Single item cash sales .................................... 47 Currency exchange function .......................... 48 Premium ......................................................... 50 Coupon ........................................................... 50 VAT breakdown printing ................................ 51 Department / PLU name selection / set ......... 52 Preset message /g
Inhaltszusammenfassung zur Seite Nr. 19
19 E Getting Started
Inhaltszusammenfassung zur Seite Nr. 20
Introducing the Register General guide This part of the manual introduces you to the cash register and provides a general explanation of its various parts. display drawer keyboard pop-up display printer cover take-up reel main operator customer Pop-up display Take-up reel (customer display) Main display Roll paper Mode switch Printer Keyboard Com port connector RAC connector cover cover Drawer Drawer lock Printer cover (with small size drawer) Roll paper You can use the roll paper to
