Inhaltszusammenfassung zur Seite Nr. 1
CASSETTE RECEIVER
РЕСИВЕР С КАССЕТНЫМ ПРОИГРЫВАТЕЛЕМ
KS-F315
В ñîîòâåòñòâèè ñ Зàêîíîì Рîññèéñêîé Фåäåðàöèè “О çàùèòå
ïðàâ ïîòðåáèòåëåé” ñðîê ñëóæáû (ãîäíîñòè) äàííîãî òîâàðà “ïî
èñòå÷åíèè êîòîðîãî îí ìîæåò ïðåäñòàâëяòü îïàñíîñòü äëя æèçíè,
çäîðîâüя ïîòðåáèòåëя, ïðè÷èíяòü âðåä åãî èìóùåñòâó èëè
îêðóæàþùåé ñðåäå” ñîñòàâëяåò ñåìü (7) ëåò ñî äíя ïðîèçâîäñòâà.
Эòîò ñðîê яâëяåòñя âðåìåíåì, â òå÷åíèå êîòîðîãî ïîòðåáèòåëü
äàííîãî òîâàðà ìîæåò áåçîïàñíî èì ïîëüçîâàòüñя ïðè óñëîâèè
ñîáëþäåíèя èíñòðóêöèè ï
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS.................................................... 3 RADIO OPERATIONS................................................... 4 Listening to the radio ..................................................................... 4 Storing stations in memory ..................................
Inhaltszusammenfassung zur Seite Nr. 3
BASIC OPERATIONS 1 2 Note: When you use this unit for the first time, set the built-in clock correctly, see page 14. 3 1 /I/ATT Turn on the power. Notes on One-Touch Operation: • When you select tuner as a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. • If the cassette is already in the cassette compartment, tape play starts automatically. 2 F M Play the source. A M To operate the tuner, see pages 4 – 9. To operate
Inhaltszusammenfassung zur Seite Nr. 4
RADIO OPERATIONS Listening to the radio 1 3 2 1 /I/ATT Turn on the power. Note on One-Touch Operation: When you select a band in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. FM1 FM2 2 F M FM3 Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM1 and FM2: 87.5 - 108 MHz FM3 to listen to an FM station. FM3: 65 - 74 MHz A M AM Note: When a cassette is in the cassette compartment, you cannot select the tuner.
Inhaltszusammenfassung zur Seite Nr. 5
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations. FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 2 1 FM1 FM2 FM3 1 F M Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 2 Press and hold the button for more than 2 seconds. “SSM” app
Inhaltszusammenfassung zur Seite Nr. 6
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Example: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 2 3 1 1 F M Select the FM1 band. 2 Tune into a station of 88.3 MHz. See page 4 to tune into a station. 3 Press and hold the button for more than 2 seconds. Preset number “P1” flashes for a while. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: • A previously preset station is erased
Inhaltszusammenfassung zur Seite Nr. 7
Storing your favorite stations into the one-touch operation button (EX-extra) You can preset an FM or AM station (such as your favorite station or traffic announcement station); and recall it by one touch operation even if the unit is turned off. EXAMPLE: Storing an FM station of 88.3 MHz into the one-touch operation button (EX). 1 1 2 1 Follow the steps 1 and 2 on page 6. 2 E X Press and hold the button for more than 2 seconds. "P0" flashes on the display, showing that the station has been pres
Inhaltszusammenfassung zur Seite Nr. 8
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see page 5 or 6. 2 EX 1 FM1 FM2 1 F M FM3 A M AM Select the band (FM1, FM2, FM3 or AM) you want. 2 Select the number (1 – 6) for the preset station you want. To tune in the favorite station The unit automatically turns on (if it has been off). E X Your favorite station is turned in – except when the tape is playing. • If you press the button again,
Inhaltszusammenfassung zur Seite Nr. 9
Other convenient tuner functions SEL MO +/– SCAN Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcast. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO whi
Inhaltszusammenfassung zur Seite Nr. 10
TAPE OPERATIONS Listening to a tape 3 2 1 1 /I/ATT Turn on the power. 2 Insert a cassette. When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) 3 Select the tape direction. • Press the both buttons at the same time. Each time you press the button, the tape direction changes PROG alternatively – forward ( ) and reverse ( ). To stop play and eject the cassette Press 0. Tape play stops and the cassette ejects from the cassett
Inhaltszusammenfassung zur Seite Nr. 11
SOUND ADJUSTMENTS Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels. Each time you press LOUD, the loudness function turns on/off alternatively. LOUD |\ Selecting preset sound modes You can select a preset sound adjustment suitable to the music genre. Each time you press SOUND, the sound mode changes as follows. SOUND Indicati
Inhaltszusammenfassung zur Seite Nr. 12
Adjusting the sound You can adjust the treble/bass sound and the speaker balance. 2 1 1 Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –6 (min.) — +6 (max.) (bass) TRE Adjust the treble –6 (min.) — +6 (max.) (treble) FAD Adjust the front and rear speaker R6 (rear only) — F6 (front only) (Fader)* balance BAL Adjust the left and right speaker L6 (left only) — R6 (right only) (Balance) balance VOL Adjust the volume 00 (min.) — 50 (max.) (Volume) Note: * If you are u
Inhaltszusammenfassung zur Seite Nr. 13
Storing your own sound adjustments You can adjust the sound modes (BEAT, POP, SOFT: see page 11) to your preference and store your own adjustments in memory. 3 2 2 1,4 SOUND 1 Call up the sound mode you want to adjust. See page 11 for details. Within 5 seconds 2 To adjust the bass or treble sound level Select “BAS” or “TRE.” LOUD To turn on or off the loudness function Each time you press LOUD, the loudness function turns on and off alternatively. (= go to step 4) Within 5 seconds 3 Adjust the b
Inhaltszusammenfassung zur Seite Nr. 14
OTHER MAIN FUNCTIONS Setting the clock 2,3 1,4 2,3 4 1 Press and hold the button for more than 2 seconds. “CLOCK H” or “CLOCK M” appears on the display. 2 1. Set the hour. 1. Select “CLOCK H” if not shown on the display. 2. 2. Adjust the hour. 3 1. Set the minute. 1. Select “CLOCK M.” 2. 2. Adjust the minute. 4 Finish the setting. To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. During tuner o
Inhaltszusammenfassung zur Seite Nr. 15
Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control How to attach the control panel panel Before detaching the control panel, be sure to turn off the power. 1 Insert the left side of the 1 control panel into the groove Unlock the control panel. on the panel holder. 2 2 Press the right side of the
Inhaltszusammenfassung zur Seite Nr. 16
MAINTENANCE To extend the lifetime of the unit This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below. To clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: – Sound quality is reduced. – Sound level decreases. – Sound drops out. • Do not play dirty or dusty tapes. • Do not tou
Inhaltszusammenfassung zur Seite Nr. 17
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • A cassette tape cannot be You have tried to insert a Insert the cassette with the inserted. cassette in the wrong way. exposed tape facing right. • Cassette tapes become hot. This is not a malfunction. • Tape sound is at very low The tape head is dirty. Clean it with a head cleaning level and sound quality is tape. degraded. • Sound is sometimes
Inhaltszusammenfassung zur Seite Nr. 18
SPECIFICATIONS AUDIO AMPLIFIER SECTION CASSETTE DECK SECTION Maximum Power Output: Wow & Flutter: 0.15% (WRMS) Front: 40 watts per channel Fast-Wind Time: 190 sec. (C-60) Rear: 40 watts per channel Frequency Response: Continuous Power Output (RMS): 50 Hz to 14 000 Hz Front: 16 watts per channel into 4 Ω, 40 Signal-to-Noise Ratio: 52 dB Hz to 20 000 Hz at no more than Stereo Separation: 40 dB 0.8% total harmonic distortion. Rear: 16 watts per channel into 4 Ω, 40 GENERAL Hz to 20 000 Hz at no mor
Inhaltszusammenfassung zur Seite Nr. 19
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Зàòðóäíåíèя ïðè ýêñïëóàòàöèè? Пîæàëóéñòà, ïåðåçàãðóçèòå Вàøå óñòðîéñòâî Дëя ïîëó÷åíèя èíôîðìàöèè î ïåðåçàãðóçêå Вàøåãî óñòðîéñòâà îáðàòèòåñü íà ñîîòâåòñòâóþùóþ ñòðàíèöó VICTOR COMPANY OF JAPAN, LIMITED EN, RU J C 1000AOMCAPJEIN V KS-F315[EE]/f 2
Inhaltszusammenfassung zur Seite Nr. 20
Multi Music Scan Multi Music Scan 10 184 mm 53 mm KS-F315 Installation/Connection Manual Рóêîâîäñòâî ïî óñòàíîâêå/ ïîäêëþ÷åíèþ 1000AOMCAPJEIN GET0002-002A JV C EN, RU [EE] ENGLISH РУССКИЙ • This unit is designed to operate on 12 volts DC, NEGATIVE ground electrical systems. • Эòî óñòðîéñòâî ðàçðàáîòàíî äëя ýêñïëóàòàöèè íà 12 В ïîñòîяííîãî íàïðяæåíèя ñ ìèíóñîì íà ìàññå. INSTALLATION УСТАНОВКА (IN-DASH MOUNTING) (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ) • The following illustration shows a typical installati
