Bedienungsanleitung Black & Decker WM225 Type 5

Inhaltszusammenfassung zur Seite Nr. 1

8. Snap-in crank handle as shown in Figure 8.
9. To assemble the rubber feet to your Workmate: Turn the unit upside down. Swing
out the four legs to the fully extended and locked position. Align the rubber foot with
the leg as shown in Figure 9. Lightly tap foot into place with a hammer.
CHANGING THE INDEXED POSITION OF THE REAR JAW:
®
1. Install the rear jaw in 1 of 3 possible indexed “keyhole” positions by indexing the rear
Workmate 225 Type 5
vise jaw into a keyhole in the vise jaw bracket

Inhaltszusammenfassung zur Seite Nr. 2

should be made within the time period of the retailer’s policy for exchanges (usually 30 to MORDACHES ORIENTABLES 90 days after the sale). Proof of purchase may be required. Please check with the 1. Les quatre mordaches orientables comprises peuvent être utililisées dans l’un des trous retailer for their specific return policy regarding returns that are beyond the time set for des mâchoires arrière et avant. Les mordaches servent à prolonger la capacité de exchanges. serrage du centre de proj

Inhaltszusammenfassung zur Seite Nr. 3

5. Instale la mordaza frontal sobre los bloques de remate de manera que los orificios más pequeños en la orilla de la mordaza queden sobre los postes de los bloques Para reparación y servicio de sus herramientas eléctricas, favor de dirigirse de remate. Con la mordaza colocada como se describe arriba, insértela en la al Centro de Servicio más cercano: estructura como se ilustra en la Figura 6; inserte dos de los cuatro tornillos, (M), en CULIACAN, SIN MONTERREY, N.L. TORREON, COAH los orifi