Bedienungsanleitung Chauvet 15090388

Inhaltszusammenfassung zur Seite Nr. 1

User Manual

Inhaltszusammenfassung zur Seite Nr. 2

TABLE OF CONTENTS 1. Before You Begin ................................................................................. 3 What Is Included ............................................................................................... 3 Unpacking Instructions ...................................................................................... 3 Claims ........................................................................................................................ 3 Text C

Inhaltszusammenfassung zur Seite Nr. 3

1. BEFORE YOU BEGIN · 1 x MotionDrape™ LED · Replacement LEDs What Is · 1 x MotionDrape™ Controller · Reusable Zip Ties (Tie Wraps) Included · 1 x Power Cord · 1 x Warranty Card · 1 x Signal Cable · 1 x Quick Reference Guide · 1 x Carrying Bag Unpacking Immediately upon receipt, carefully unpack this product and check the container to make sure you have received all the parts indicated above in good condition. Instructions If the container or the material inside the c

Inhaltszusammenfassung zur Seite Nr. 4

Use on Dimmer Auto Programs x P Product at a Outdoor Use Auto-ranging Power Supply x P Glance Sound Activated Replaceable Fuse P P DMX User Serviceable x P Master/Slave Duty Cycle P x Please read the following Safety Notes carefully before working with this product. They Safety Notes include important safety information about its installation, usage, and maintenance. · Always connect this product to a grounded circuit to avoid the risk of electrocution. · Always d

Inhaltszusammenfassung zur Seite Nr. 5

2. INTRODUCTION Product Overview Front Panel Button Menu LED Display Top Panel Curtain Input Power In Fuse holder DMX Out On/Off Switch DMX In Product Dimensions MotionDrape™ LED User Manual (Rev. 05) Page 5 of 13

Inhaltszusammenfassung zur Seite Nr. 6

3. SETUP This product has an auto-ranging power supply and can work with an input voltage AC Power range of 100~240 VAC, 50/60 Hz. To determine the power requirements for this product (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions. Always connect this produc

Inhaltszusammenfassung zur Seite Nr. 7

Before mounting this product, read and follow the safety recommendations indicated in Mounting the Safety Notes section (page 2 of this manual). The MotionDrape™ LED may be mounted in any position; however, make sure Orientation adequate ventilation is provided around the product. Before deciding on a location for this product, always make sure that it will be easy to Rigging access the unit for maintenance and programming purposes. Make sure that the structure onto which

Inhaltszusammenfassung zur Seite Nr. 8

4. OPERATION To access the control panel functions, use the four buttons located underneath the Control Panel display. Please refer to the Product Overview (page 5) to see the buttons location on the Operation control panel. Button Function Press to find an operation mode or to back out of the current menu

option Press to activate a menu option or a selected value Press to scroll up the list of options or to find a higher value Press to s

Inhaltszusammenfassung zur Seite Nr. 9

Set this product in one of the standalone modes to control it without a DMX controller. Configuration 1. Connect this product to a suitable power outlet. (Standalone) 2. Turn this product on. Never connect a product that is operating in any standalone mode, whether Static, Automatic, or Sound to a DMX string connected to a DMX controller. This is because products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. T

Inhaltszusammenfassung zur Seite Nr. 10

DMX Channel Assignments and Values Channel Function Value Setting 8-CH 000 ó 007 No function 1 Dimmer 008 ó 255 0~100% 000 ó 010 No function 2 Strobe 011 ó 255 0~100% 3 Red 000 ó 255 0~100% 4 Green 000 ó 255 0~100% 5 Blue 000 ó 255 0~100% 000 ó 015 No function 016 ó 031 Falling Star 032 ó 047 Diagonal Color Bands 048 ó 063 Color Pattern Chase 064 ó 079 Inward Arrow (L-R) 080 ó 095 Color Stack 096 ó 111 Multi-Color Freeway 112 ó 127 Color Wave (L-R) 6 Programs 1-15

Inhaltszusammenfassung zur Seite Nr. 11

5. TECHNICAL INFORMATION General Troubleshooting Symptom Possible Cause(s) Possible Action(s) General low light intensity Dirty LEDs Clean the MotionDrape™ LED drape regularly One LED in an LED group Faulty (shorted) LED Replace faulty LED failed Faulty (open) LED Replace faulty LED All the LEDs in a group Faulty LED cable Replace faulty LED cable failed Faulty LED driver Replace faulty LED Driver box Faulty LED driver box Replace faulty LED Driver box Single MotionDr

Inhaltszusammenfassung zur Seite Nr. 12

In case you need to return a product or request support, follow the procedure below: Contact · If you live in the U.S., contact CHAUVET® World Headquarters (see below). Procedure · If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.(see below). · If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your distributor of record. Refer to our Web site for contact details of distributors outside the U.S., United Kingdom, or Ireland. World Headqua

Inhaltszusammenfassung zur Seite Nr. 13

6. TECHNICAL SPECIFICATIONS Length (Drape) Width (Drape) Height (Drape) Weight (Drape) Dimensions and Weight 9.8 ft (118 in) 6.6 ft (78.7 in) 0.6 in (15 mm) 9.8 lbs (4.4 kg) 3 m (3,000 mm) 2 m (2,000 m) Length (Control Box) Width (Control Box) Height (Control Box) Weight (Control Box) 9.6 in (243 mm) 5.3 in (135 mm) 2 in (50 mm) 1.8 lbs (0.8 kg) Note: Dimensions in inches and feet rounded to the nearest decimal digit. Power Supply Type Range Voltage Selection Powe