Inhaltszusammenfassung zur Seite Nr. 1
PLATINUM SPOT 15R PRO
KEEP THIS MANUAL FOR FUTURE NEEDS
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly. Every person involved with the installation, operation and maintenance of this device has to: -be
Inhaltszusammenfassung zur Seite Nr. 3
·Iris from 5%~100% with pulse iris effect. ·Zoom: 9°~27° linear zoom ·Strobe/shutter: High speed shutter, 0-13 Hz or random strobe ·Control board with full color LCD graphic display and touch-keyboard ·Auto-program: 7 pre-built programs can be selected. ·Software-upload by optional accessory via DMX line Overview 1) Lens 2) Display 3) Wireless indicator 4) DC Switch 5) Microphone 6) Left-button 7) Down-button 8) Right-button 9) Mode/Esc-button 10)Up-button 11)ENTER-button 12)Handle 13)Lamp br
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY INSTRUCTIONS This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. If the device has been exposed to temperature changes due to en
Inhaltszusammenfassung zur Seite Nr. 5
Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-professionals. GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discotheques, theatres, etc., the device was designed for indoor use only. This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual. Lighting effects are not desi
Inhaltszusammenfassung zur Seite Nr. 6
reach very high temperature. During the installation of halogen lamps do not touch the glass bulbs bare handed. Always use a cloth to handle the lamps during insertion and removal. Do not install lamps with a higher wattage. They generate higher temperatures than which the device was designed for. For the installation, you need one: PLATINUM 15R Procedures: 1) Unscrew the 3 screws (A, B, C) on the bottom of the housing, holding the plate where the lamp is underneath. Carefully remove the meta
Inhaltszusammenfassung zur Seite Nr. 7
Overhead mounting requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. Before mounting make sure that the installation area can hold a minimum point load of 10 times the device’s weight. Connect the fixture to the mains with t
Inhaltszusammenfassung zur Seite Nr. 8
d) Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw. Notice: this step is quite important to ensure that the fixture will not drop out by the damage of the clamp. DMX-512 control connection Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Movin
Inhaltszusammenfassung zur Seite Nr. 9
Projector DMX start address selection All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture responds to the correct control signals. This digital starting address is the channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controller. The allocation of this starting address is achieved by setting the correct number on the display located on the base of the device. You can set the sa
Inhaltszusammenfassung zur Seite Nr. 10
1)Connect the transmitter with the DMX controller 2)To make the fixture installed with wireless receiver log in to the transmitter a) Initially, the indicator on the receiver fixture should be in Solid red b) Press and hold the configuration button on transmitter for less than 3 seconds the red/ green LEDs on the transmitter and the receiver fixture will flash rapidly for about 5~ 10 seconds while the system goes through its setup procedure. c) Once the receiver fixture is logged in to the tra
Inhaltszusammenfassung zur Seite Nr. 11
To access the display menu via the internal battery, press the DC switch button for 2seconds; To shut off the display immediately, choose the commend " Reset All" menu and press "Enter" button, otherwise, the display will automatically switch off about 1 minute from last button press. Main Menu Functions Fun S S S Se e e et t t t D D D Dm m m mx x x x A A A Addre ddre ddre ddres s s ss s s s A A A A001~A 001~A 001~A 001~AX X X XX X X XX X X X DMX address setting ctio V V V Va a a al l l lue ue
Inhaltszusammenfassung zur Seite Nr. 12
D D D D D De e e e e e-A -A -A -A -A -Ac c c c c ct t t t t t W W W W W WD D D D D DM M M M M MX X X X X X De-activate WDMX W Wi ire rel le es ss s D DM MX X A A A A A Ac c c c c ct t t t t ti i i i i iva va va va va vat t t t t te e e e e e W W W W W WD D D D D DM M M M M MX X X X X X Activate WDMX A A A A A Ac c c c c ct t t t t t & & & & & & D D D D D Da a a a a at t t t t ta a a a a a O O O O O Out ut ut ut ut ut Act & Data Out Re Re Re Re Re Res s s s s st t t t t t W W W W W
Inhaltszusammenfassung zur Seite Nr. 13
“Set DMX Address” - DMX address setting – This function is used to set or adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a unique starting address. The addressing feature is what allows DMX to function properly. The DMX address of a fixture is what allows it to communicate with a controller properly. The DMX addressing also allows the fixture to ignore any DMX information coming from the controller that is not meant specifically for the fixture. Becau
Inhaltszusammenfassung zur Seite Nr. 14
Information: Time information These functions will detail different time functions associated with the fixture. Current Time This function displays the running time of the fixture from the last power on. The display shows “XXXX”, where “XXXX” represents the number of hours the fixture has been running. This counter is automatically reset after every power-on. Total Run Time This function tracks the total running time of the fixture from the very first start- up. Where “XXXX ”represents
Inhaltszusammenfassung zur Seite Nr. 15
Clear Lamp Time This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at every lamp replacement. This procedure tracks the lamp running time so the lamp can be replaced at the end of it’s recommended duty cycle. • Select “Clear lamp time” in the system menu. • The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time. • Press enter to confirm. • Press the Mode/Esc-button to return to the main menu. Temperature Info. This function will detail the int
Inhaltszusammenfassung zur Seite Nr. 16
When engaged, this function will allow the lamp to be switched “off” via a DMX controller. Select “ON” to enable this function or “OFF” to disable it. Lamp On at Temp. The fixture is designed to shut the lamp off when an excessive temperature is sensed inside the head by the on-board CPU. The lamp is shut down to prevent damage to the lamp and avoids possible internal damage to the head. This function sets the minimum temperature for lamp restrike after the lamp has been automatically shu
Inhaltszusammenfassung zur Seite Nr. 17
No DMX Status – This function dictates how the fixture will function if it looses DMX signal during normal operation. The default function is set to hold, in which the fixture will lock into the last DMX signal it received and remain in that position until it is turned off or begins receiving a new DMX signal. If the fixture is turned on without any DMX signal, the fixture will automatically go in to sound- active mode. Available settings are: “Close” – Shutter flags will close. “Hold” – F
Inhaltszusammenfassung zur Seite Nr. 18
original DS-250. Tilt speed will be the same as speed 2. Mic Sensitivity – This function makes the internal microphone more or less sensitive to sound. This function only works in conjunction with the sound active modes. The default setting is 70% and setting range from 0% to 99%. Hibernation – When activated, this function will automatically put the fixture in power stand-by mode after a defined period of time of no DMX activity. This prevents the fixture form expending power for extended
Inhaltszusammenfassung zur Seite Nr. 19
the menu commands. Temperature C/F – This function changes the temperature the unit will display from either Celsius or Fahrenheit. Fahrenheit is set as the default measurement. Initial effect – This function allows a user to create and assign a custom “Home Position” into the fixture. Adjusting the Pan and Tilt values then locking those values into the fixture’s internal memory creates the new “Home” position. Wireless DMX This section will control the functionality of the built-in wi
Inhaltszusammenfassung zur Seite Nr. 20
fixture channel and test it’s function independently from the control board. Lamp adjustment (manual control) – This function readies the fixture for lamp optimization in a simple single step procedure. This function will center the pan and tilt motors and at the same time open the shutter and bring the dimmer to 100%. The pan and tilt function will still operate if the fixture needs to be positioned to a flat clear surface. For more information on lamp optimization please see Section
