Inhaltszusammenfassung zur Seite Nr. 1
PC Programming Manual
Pure IP-PBX
Model No. KX-NCP500
KX-NCP1000
Thank you for purchasing a Panasonic Pure IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-NCP500/KX-NCP1000: PBMPR Software File Version 2.0000 or later
Inhaltszusammenfassung zur Seite Nr. 2
Introduction Introduction About this Programming Manual The PC Programming Manual is designed to serve as a system programming reference for the Panasonic Pure IP-PBX. It explains how to programme this PBX using the Maintenance Console software. The PC Programming Manual is divided into the following sections: Section 1, Overview Provides an overview of programming the PBX. Section 2, Introduction of Maintenance Console Explains the layout and menus of the Maintenance Console. Sections 3 – 13, M
Inhaltszusammenfassung zur Seite Nr. 3
Introduction This notice means that misuse could result in death or serious injury. WARNING This notice means that misuse could result in injury or damage to CAUTION property. WARNING Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised Panasonic Factory Service Centre. CAUTION Do not remove the SD Memory Card while power is supplied to the PBX. Do
Inhaltszusammenfassung zur Seite Nr. 4
Introduction In some cases, additional information, including updates to this and other manuals, is included in the Maintenance Console’s Information before programming. Install the latest version of Maintenance Console to view this information. • In this manual, the suffix of each model number (e.g., KX-NCP500NE) is omitted unless necessary. The KX-NCP500UK/KX-NCP1000UK, KX-NCP500NE/KX-NCP1000NE, and KX-NCP500GR/KX-NCP1000GR are designed to interwork with the: • Analogue Public Switched Telepho
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Table of Contents 1 Overview .................................................................................................11 1.1 Introduction .....................................................................................................................12 1.1.1 Introduction .....................................................................................................................12 1.1.2 Entering Characters ...................................................
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents 2.6.8 Utility—Error Log ............................................................................................................74 2.6.9 Utility—T1/E1 Signalling Bit Monitor ...............................................................................76 2.6.10 Utility—T1/E1 Line Trace ...............................................................................................77 2.6.11 Utility—ISDN/QSIG Protocol Trace ....................................................
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents 3.37 [1-1] Slot—Port Property - T1 Port—Connection Command .....................................332 3.38 [1-1] Slot—Card Property - E1 type .............................................................................333 3.39 [1-1] Slot—Card Property - E1 type—Line Signal Setting .........................................342 3.40 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1 ............................................350 3.41 [1-1] Slot—Card Property - E1 type—MFC-R2 Sett
Inhaltszusammenfassung zur Seite Nr. 8
Table of Contents 5.18 [3-6] Extension Hunting Group—Member List ...........................................................568 5.19 [3-7-1] VM(DPT) Group—System Settings ..................................................................569 5.20 [3-7-2] VM(DPT) Group—Unit Settings ........................................................................571 5.21 [3-7-2] VM(DPT) Group—Unit Settings—Member List ...............................................572 5.22 [3-8-1] VM(DTMF) Group—System Set
Inhaltszusammenfassung zur Seite Nr. 9
Table of Contents 9.5 [7-5] Miscellaneous .......................................................................................................794 10 [8] ARS ..................................................................................................797 10.1 [8-1] System Setting ......................................................................................................798 10.2 [8-2] Leading Number ................................................................................
Inhaltszusammenfassung zur Seite Nr. 10
Table of Contents 10 PC Programming Manual
Inhaltszusammenfassung zur Seite Nr. 11
Section 1 Overview This section provides an overview of programming the PBX. PC Programming Manual 11
Inhaltszusammenfassung zur Seite Nr. 12
1.1.1 Introduction 1.1 Introduction 1.1.1 Introduction These programming instructions are designed to serve as an overall system programming reference for the PBX. Each feature in the PBX has default settings that can be changed to customise the PBX to your requirements. These settings control the functions of the PBX, and changing them is referred to as "system programming". Only one person can perform system programming at a time. Any other users trying to enter programming mode will be deni
Inhaltszusammenfassung zur Seite Nr. 13
1.1.2 Entering Characters 1.1.2 Entering Characters The characters on a white background below can be used when storing a name, message, password or other text entry data using a PC. The available characters vary according to the model of PBX. Table 1 (Standard) PC Programming Manual 13
Inhaltszusammenfassung zur Seite Nr. 14
1.1.2 Entering Characters Table 2 (For CE model) 14 PC Programming Manual
Inhaltszusammenfassung zur Seite Nr. 15
1.1.2 Entering Characters Table 3 (For RU model) PC Programming Manual 15
Inhaltszusammenfassung zur Seite Nr. 16
1.1.2 Entering Characters Table 4 (For GR model) 16 PC Programming Manual
Inhaltszusammenfassung zur Seite Nr. 17
1.2.1 Installing and Starting the Maintenance Console 1.2 PC Programming 1.2.1 Installing and Starting the Maintenance Console System programming, diagnosis and administration can be performed with a PC using the Maintenance Console. This section describes how to install and start the Maintenance Console. System Requirements Required Operating System ® ® ® • Microsoft Windows XP or Windows Vista Business operating system Minimum Hardware Requirements • HDD: 100 MB of available hard disk space
Inhaltszusammenfassung zur Seite Nr. 18
1.2.1 Installing and Starting the Maintenance Console Installing the Maintenance Console Note • Make sure to install and use the latest version of the Maintenance Console. • To install or uninstall the software on a PC running Windows XP Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group. • To install or uninstall the software on a PC running Windows Vista Business, you must be logged in as a user in the "Administrators" group. 1. Copy the setup f
Inhaltszusammenfassung zur Seite Nr. 19
1.2.1 Installing and Starting the Maintenance Console 7. When country/area data do not match: a. Click OK to replace the country/area data of the PBX. Replacement may take several minutes to complete. b. Follow the procedure described in Section 3.13.1 Starting the PBX in the Installation Manual and restart the PBX. c. Repeat step 5 to reconnect the Maintenance Console to the PBX. 8. Follow the instructions of the Quick Setup wizard for the basic items in Quick Setup. 9. On the IP addressing in
Inhaltszusammenfassung zur Seite Nr. 20
1.2.1 Installing and Starting the Maintenance Console from the LAN and then connect the PC with an Ethernet straight cable using 192.168.0.101 for the IP address of the IPCMPR card. *1 Valid IP address range: "1.0.0.0" to "223.255.255.255" *2 Valid IP address range: "1.0.0.0" to "223.255.255.255" *3 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255) *4 Valid IP address range: "0.0.0.0" to "223.255.255.255" PBX Web Manager It is possible to use a PC wi
