Inhaltszusammenfassung zur Seite Nr. 1
C
Specifications
PE 4000 Series
End Control
Pallet Truck
PE 4000
Series
Inhaltszusammenfassung zur Seite Nr. 2
PE 4000 Series End Control C Pallet Truck Option 1 – 37.06" Option 2 – 33.75" 9" 90° 9.12" 36" 16 7.3" 15 11 10" 16 23.3" – 84" Forks 32.6" – 93" Forks 35.3" – 96" Forks 22.0" – 84" Forks 31.3" – 93" Forks 34.0" – 96" Forks 4.5" 9.75" 6" 9.88" 9.25" Battery roller to floor 6.06", forks lowered 3.25" 4.5" 3.75" 14 13 10 11 12
Inhaltszusammenfassung zur Seite Nr. 3
Specifications PE 4000 Series 1 Manufacturer Crown Equipment Corporation 2 Model PE 4000 3 Load Capacity lb 6000/8000 4 Power Electric 24 Volts 5 Operator Type Stand-up Walk/Ride 8 Lift Height in 9.25 9 Lift in 6 10 Head Length Option 1/Option 2 in 36.7/43.2 16 Outside Fork Spread Standard Tip in 22/27 Extended Tip in 23/28 17 Speed Travel Power Unit First Forks First Empty mph 8.6 5.5 4000 lb mph 7.0 5.2 6000 lb mph 6.3 5.1 8000 lb mph 6.0 5.0 PE 4000 Series Standard-Tip Forks Extended-Tip Fork
Inhaltszusammenfassung zur Seite Nr. 4
Technical Information PE 4000 Series Optional Equipment Operator Area and Controls Maximum Battery Size The QuickPick™ control handle 1. Curtis Spyglass Gage The PE 4000 Series has a new Option 1 - 6.69" wide x 34.44" option, normally used in conjunc- (discharge indicator with lift operator platform which increases long x 31.62" high tion with coast control or Quick lockout, hour meter, and operator comfort and produc- Coast™, assists an operator to Option 2 - 13.19" wide x 31.12" event codes)
Inhaltszusammenfassung zur Seite Nr. 5
PE 4000 Series Technical Information Fork Assembly Fork adjustment is done at the Drive Unit pallet. On models with a single Fork width - 9.12" on standard-tip toe with no need to remove a All gear drive from drive motor to load wheel, the “C” dimension fork models, 10" on extended-tip cover plate. Fork heel height drive wheel axle. Drive tire axle is should be 6" maximum and the fork models. Fork spread - 22" adjustment is done quickly with- mounted in the drive unit on both “D” dimension shoul
Inhaltszusammenfassung zur Seite Nr. 6
Crown Equipment Corporation New Bremen, Ohio 45869 USA C Tel 419-629-2311 Fax 419-629-3796 crown.com Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Momentum symbol, InfoPoint, Quick Coast and QuickPick are trademarks of Crown Equipment Corporation. Copyright 2003 Crown Equipment Corporation SF14291 Rev. 10/03 Printed in U.S.A.
