Inhaltszusammenfassung zur Seite Nr. 1
SL20 Gen II
Parts Manual
Phase 7
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450599-2
Inhaltszusammenfassung zur Seite Nr. 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be po
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Phase 7.3 Non-Coin Top Panel Assembly for Top Control Models ............................................................................... 4 Phase 7.5 Non-Coin Top Panel Assembly for Top Control Models ............................................................................... 5 Front Panel Assemblies .............................................................................................................................................. 6 Phase 7.5 Non-Coin Bottom Pa
Inhaltszusammenfassung zur Seite Nr. 4
Phase 7.3 Non-Coin Top Panel Assembly For Top Control Models Illus. No. Part No. Qty. Description 1 112579 1 Phase 7 Keypad 2 137250 1 Phase 7 Ribbon Cable 3 137270 1 Large Character Display 4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw 5 153010 4 #6 Star Washer 6 887012 1 Phase 7.3.2 Board with a Fire Suppression System (for models mfd. as of January 22, 2004) 887009 1 Phase 7.3.2 Board with a Fire Suppression System (for models mfd. prior to January 22, 2004) 7 818482 1 Black Contr
Inhaltszusammenfassung zur Seite Nr. 5
Phase 7.5 Non-Coin Top Panel Assembly For Top Control Models Illus. No. Part No. Qty. Description 1 112580 1 Phase 7.5 Non-Coin Keypad 2 153010 3 #6 Star Washer 3 150005 3 #6-32 x 1/4” Phillips Round Head Machine Screw 4 887020 1 Phase 7.5 Non-Coin Board with a Fire Suppression System 5 818463 1 Non-Coin Top Control Panel 6 818206 1 Magnetic Switch 450599-2 www.amdry.com 5
Inhaltszusammenfassung zur Seite Nr. 6
Front Panel Assemblies Illus. No. Part No. Qty. Description 1 818478 1 Top Control Panel for Bottom Controls 2 ––––––* – Logo ONLY 3 818466 1 Front Bottom Panel Assembly for Top Controls * Contact reseller for logo. 6 American Dryer Corporation 450599-2
Inhaltszusammenfassung zur Seite Nr. 7
Phase 7.5 Non-Coin Bottom Panel Assembly For Bottom Control Models Illus. No. Part No. Qty. Description 1 112580 1 Phase 7.5 Non-Coin Keypad 2 887020 1 Phase 7.5 Non-Coin Board with a Fire Suppression System 3 153010 3 #6 Star Washer 4 150005 3 #6-32 x 1/4” Phillips Round Head Machine Screw 5 818465 1 Phase 7.5 Non-Coin Bottom Control Panel 450599-2 www.amdry.com 7
Inhaltszusammenfassung zur Seite Nr. 8
Phase 7.3 Non-Coin Bottom Panel Assembly For Bottom Control Models Illus. No. Part No. Qty. Description 1 112579 1 Phase 7.3 Keypad 2 137270 1 Large Character Display 3 818436 1 Non-Coin Bottom Control Panel 4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw 5 153010 4 #6 Star Washer 6 887012 1 Phase 7.3.2 Board with a Fire Suppression System (for models mfd. as of January 22, 2004) 887009 1 Phase 7.3.2 Board with a Fire Suppression System (for models mfd. prior to January 22, 2004) 7 137
Inhaltszusammenfassung zur Seite Nr. 9
Phase 7.3 Coin Top Panel Assembly For Top Control Models Illus. No. Part No. Qty. Description 1 137270 1 Large Character Display 2 883774 1 Optic Switch 3 153010 4 #6 Star Washer 4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw 5 112579 1 Phase 7.3 Coin Keypad 6 137250 1 Phase 7.3 Ribbon Cable 7 887011 1 Phase 7.3.2 Board without a Fire Suppression System (for models mfd. as of January 22, 2004) 887012 1 Phase 7.3.2 Board with a Fire Suppression System (for models mfd. as of January 22,
Inhaltszusammenfassung zur Seite Nr. 10
Phase 7.3 Coin Bottom Panel Assembly For Bottom Control Models Illus. No. Part No. Qty. Description 1 137270 1 Large Character Display 2 883774 1 Optic Switch 3 153010 4 #6 Star Washer 4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw 5 112579 1 Phase 7.3 Coin Keypad 6 137250 1 Phase 7.3 Ribbon Cable 7 887011 1 Phase 7.3.2 Board without a Fire Suppression System (for models mfd. as of January 22, 2004) 887012 1 Phase 7.3.2 Board with a Fire Suppression System (for models mfd. as of Janua
Inhaltszusammenfassung zur Seite Nr. 11
Main Door Assemblies Illus. No. Part No. Qty. Description 1 883824 1 Door Pan with Glass 2 818832 1 Door Assembly Complete (right hinge) Stainless Steel (for models mfd. as of October 25, 2004) (includes illus. nos. 1 through 13) 818830 1 Door Assembly Complete (right hinge) White (for models mfd. as of October 25, 2004) (includes illus. nos. 1 through 13) 818833 1 Door Assembly Complete (left hinge) Stainless Steel (for models mfd. as of October 25, 2004) (includes illus. nos. 1 through 13) 818
Inhaltszusammenfassung zur Seite Nr. 12
Middle Front Panel Assembly Illus. No. Part No. Qty. Description 1 102004 4 Door Magnet 2 152224 4 #10-32 x 1/2” Flat Head Spanner Machine Screw 3 103067 2 Door Hinge (for models mfd. as of November 20, 2003) 884134 2 Door Hinge (for models mfd. prior to November 20, 2003) 4 150321 4 #10-32 x 1/2” Phillips Head Machine Screw 5 818184 1 Front Left Wheel Assembly (refer to Front Tumbler Wheel Assemblies on page 18) 6 818183 1 Front Right Wheel Assembly (refer to Front Tumbler Wheel Assemblies on p
Inhaltszusammenfassung zur Seite Nr. 13
Lint Drawer Assembly For Models Mfd. as of July 29, 2005 Illus. No. Part No. Qty. Description ® 1 183129 2 #10-32 x 1/2” TORX Head Machine Screw 2 170168 1 Brush 3 818801 1 Lint Drawer 819345* 1 Lint Drawer Assembly Complete (includes illus. nos. 1 through 7) 4 819344* 1 Cold Rolled Steel Lint Drawer Handle 5 819287 2 Lint Drawer Handle Fastening Plate Assembly 6 185226 1 Black Lint Screen Handle Molded 7 150334 2 #8-16 x 9/32” Phillips Pan Head Screw * Specify color when ordering. 450599-2 www.
Inhaltszusammenfassung zur Seite Nr. 14
Lint Drawer Assembly For Models Mfd. prior to July 29, 2005 Illus. No. Part No. Qty. Description 1 883751 1 Stainless Steel Lint Drawer Handle (includes illus. nos. 1 through 5 and 8) 883859 1 Black Cold Rolled Steel Lint Drawer Handle (includes illus. nos. 1 through 5 and 8) 818166 1 Lint Drawer Complete with Stainless Steel Handle (includes illus. nos. 1 through 8) 818471 1 Lint Drawer Complete with Cold Rolled Steel Handle (includes illus. nos. 1 through 8) 2 151010 2 #10-32 Hex Acorn Locknut
Inhaltszusammenfassung zur Seite Nr. 15
Tumbler Assembly For Models Mfd. as of May 2004 Illus. No. Part No. Qty. Description 1 115906 2 Tumbler Felt 401010 1 Adhesive for Felt Collar (5 oz. tube) … Not Illustrated 2 102004 1 Rotational Sensor Magnet 3 884363 1 Tumbler Assembly Complete 4 154217 1 1/8” x 1/2” Pop Rivet 5 150123 3 1/4-20 x 1/4” Socket Button Head Cap Screw 6 318784 1 Tumbler Shaft 7 153048 2 Friction Pad 8 185426 1 Dual Screw Backup Washer 9 153072 2 Lock Washer 10 150445 2 1/4-20 x 3/4” Socket Head Cap Screw 450599-2 w
Inhaltszusammenfassung zur Seite Nr. 16
Tumbler Assembly For Models Mfd. prior to May 2004 Illus. No. Part No. Qty. Description 1 884359 1 Tumbler Assembly (includes illus. nos. 1 through 6) 2 318242 3 5” Tapered Rib ® 3 150313 12 #10-16 x 1/2” TORX PLUS BTN, Type 1 4 154217 1 1/8” x 1/2” Pop Rivet 5 102102 1 Rotational Sensor Magnet 6 115906 2 Tumbler Felt 401010 1 Adhesive for Felt Collar (5 oz. tube) … Not Illustrated 16 American Dryer Corporation 450599-2
Inhaltszusammenfassung zur Seite Nr. 17
Rear Support Panel Assembly Illus. No. Part No. Qty. Description 1* 818608 2 Rear Felt Pad with Shims and Pop Rivets 2 318695 1 Junction Box (for models mfd. as of August 21, 2003) 318628 1 Junction Box (for models mfd. prior to August 21, 2003) 3 318629 1 Electric Cover 4 150300 16 #10-16 x 1/2” Hex Washer TEK Screw 5 318691 1 Cover Plate (for dryers without a fire suppression system) 6 153073 15 #8-32 KEPS Nut 7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 8 818487 1 Fire Suppression Sys
Inhaltszusammenfassung zur Seite Nr. 18
Front Tumbler Wheel Assemblies Illus. No. Part No. Qty. Description 1 150510 3 1/4-20 x 3/4” Hex Head Machine Bolt 2 154264 1 M10 x 25mm Shoulder Screw 3 153007 3 1/4” Lock Washer 4 153002 1 5/16” Lock Washer 5 154013 1 M8 Hex Nut 6 154284 1 Tumbler Wheel Spacer 7 818183 1 Front Right Wheel Assembly Complete (includes illus. nos. 1 through 9) 318532 1 Front Right Roller Wheel Bracket 818184 1 Front Left Wheel Assembly Complete (includes illus. nos. 1 through 9) 318531 1 Front Left Roller Wheel B
Inhaltszusammenfassung zur Seite Nr. 19
Rear Tumbler Wheel Assemblies Illus. No. Part No. Qty. Description 1 150510 3 1/4-20 x 3/4” Hex Head Machine Bolt 2 154264 1 M10 x 25mm Shoulder Screw 3 153007 3 1/4” Lock Washer 4 153002 1 5/16” Lock Washer 5 154013 1 M8 Hex Nut 6 154284 1 Tumbler Wheel Spacer 7 818110 1 Rear Left Wheel Assembly Complete (includes illus. nos. 1 through 10) 318232 1 Rear Left Wheel Bracket 818109 1 Rear Right Wheel Assembly Complete (includes illus. nos. 1 through 10) 318233 1 Rear Right Wheel Bracket 8 153596 3
Inhaltszusammenfassung zur Seite Nr. 20
Fire Suppression System Piping Assembly Illus. No. Part No. Qty. Description 1 143581 1 3/8” N.P.T. Spray Nozzle 2 143303 1 3/8” N.P.T. Brass Locknut 3 136987 1 Pressure Switch 4 143025 1 3/4”-11.5 NH x 3/8” N.P.T. Hose Adaptor 5 143155 2 3/8” Brass Street Elbow 6 165114 1 Solenoid Valve 24V 50/60 Hz 7 143315 1 3/8” M.P.T. x 1/8” Brass Bushing 8 143251 1 3/8” M.P.T. Brass Plug 9 143220 2 3/8” F.P.T. Brass Tee 10 143241 2 3/8” Close Brass Nipple 11 318422 1 Bracket 12 318662 1 Mounting Bracket —
